SPECIAL REPAIR TO VARIOUS SMQs PH II AT AFS TEZPUR

Amount

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc 1.5 and n exc 4 sqm complete all as directed.sqm each complete all as directed.

Taking down shutter of any description exc. 1.00 Sqm but exc 2.00 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n.exc 1.5 sqm complete all as directed.sqm each complete all as specified and directed.

Supply and fix Factory made Pressed steel door frames 1.25mm thick (125x60mm wide ) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

Supply and fix Factory made Pressed door steel frames 1.25mm thick (105x60mm wide ) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

M&L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in benching, copings, bed block for filing hollow space of steel chowkhats, including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L for providing cement concrete type C-1 1:3:6 using 20mm graded stone aggregrate in lintles up to 1.50m clear span, cills, steps, seismic and other bands, plinth courses, string courses,lacing courses, parapets and railings upto 60cm in height, copings,kneelers, apex stones, bed plates, kerbs, hold fast, water trough and the like including weathering, slightly rounded or chamfered angles and throating as directed including form work complete all as specified.

S&F mild steel framed work as in bands, straps, support or stays for rainwaterpipes, including bolts if required, hook and pintle hinges; sliding bolts; clamps, hold fasts, hooks for hanging fansand siniliar other articles confirming to Fe-290 Gde -E-165 including taking down old one complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars)edges of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I, section-8, cluse 8.24 (a); supplied and fitted to chowkhats complete all as specified and as directed

S&F factory made 35mm thick 2nd class HW rail & style, plain framed, panelled shutter with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fixing, aluminium with powder coating,(minium thickness of powder coating 50 micron) frame 92mm x 29.5mm for three track sliding windows, two glazed and one gauzed shutter with one or more rebates including jointing cleat for fixing etc, with sliding type shutters, without sash bars, aluminium sections with powder coated (minium thickness of powder coating 50 micron) 39 x20mm including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium with powder coated (minium thickness of powder coating 50 micron) snap beading, scrwes etc. (thickness of aluminium sections not less than 1.5mm) with suitable sliding & locking arrangements, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and 4.8mm thick tinted sheet glass, complete all as specified and as directed.

Supply and fixing expandable powder coated of any colour anodised aluminium grill, 7.1 mm thick, weighing 2.911 Kg/Sqm, and complete arrangements for fixing the window/ Ventilator such as channel, flat, screw and necessary items, complete all as specified and as directed.

Supply and fixing, aluminium with powder coating of any colour (Thickness of powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specified and directed.

S& F for anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

S&F factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick single side prelam colour PVC sheet and edges will be painted to match the prelam sheet, reinforced with MS square tube, supplied and fixed in opening as per specification and drawing complete as directed.

Supply and fix 4.80mm thick tinted sheet glass and glazing in square exc 0.5 Sqm in each pane, complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type anodised door handles, complete all as specified and directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type anodised door handles, complete all as specified and directed.

S&F stainless steel butt hinges medium weight 100 mm long, complete all as specified and directed

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 100 mm long Aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs inclduing roller and roller plate, complete all as specified and as directed.

M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

S & F 18/19 mm thick Veneered particle board, interior grade, solid core, with decorative veneers on both faces fix with screw to timber frame work as in shutter, shelves of cupboard including suitable beading to cover the exposed edges including taking down old boarding of any description and in any position, complete all as specified and as directed.

M&L for second class hard wood plain fillets rectangular or triangular in section, bullnosed, splayed, chamfered or rounded on one edge, clean sawn secured with nails, sectional area exc 13 Sqcm but n.exc 25 Sqcm including dismantling timber scantling in filletes, rails, post, rafters, purlins etc under 40 Sq cm in section, complete all as specified and as directed

S&F 50mm dia, polished, hard wood knobs fixed with screwes, complete all as specified and directed.

S&F continuous (piano) hinges, brass, bright finish or electrogalvanised, width of flaps 30 mm (when open), complete all as specified and directed.

S&F 75 mm size extruded aluminium alloy, fabricated type, anodised door handles complete all as specified and directed.

S & F in repair 20 mm dia mild steel, chromium plated harrison rails with fixing brackets, stops, rollers etc. complete all as specified and as directed.

M&L for non skid ceramic (coloured) tiles, 7 to 8 mm thick as in floor, area of each tile exceeding 0.6 Sqm but n exceeding 0 .11 Sqm, set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bed or beeding layers of mortar 15mm thick in CM 1:4, including dismantling of exsisting tiles, complete all as specified and directed.

M&L for Glazed ceramic coloured tilesof size (300x450mm) x 7mm thick, in wall/skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat of tiles in CM (1:3) including dismantling of exsisting tiles, complete all as specified and directed.

M&L for Non - skid ceramic tiles, 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 including roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm, complete all as specified and directed.

M&L for Non - skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces including 10mm thick backing coat of tiles in CM (1:3) and including taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L for machine cut Kota stone slab 20-25 mm thick as in flooring or treads of step incl half round moulding over and including screed bed 20 mm thick in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing and including roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm, complete all as specified and directed.

M&L for machine cut Kota stone slab 20-25 mm thick as in riser / skirting to step including 10 mm thick rendering in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing, including taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick screed bed in CM (1:3), complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointed in any mortar, complete all as directed and as specified.

Providing edge moulding to 18-20mm thick Granite stone of counters vanities etc of any description including machine polishing to edge to give high gloss finish etc., complete all as directed and as specified.

M&L for rendering 10 mm thick plaster in CM (1:4) on fair faces of brick work or concrete surfaces finish even and fair without using extra cement etc. including taking down old cement plaster including racking out joints, hacking for key, scrubbing down with water on brick or stone walls, complete all as specified and as directed.

M&L for 15 mm thick rendering on other than fair face surfaces of brick wall/cement block wall or concrete surfaces in cement mortar 1:6, finished surfaces even and smooth without using extra cement, including taking down old cement plaster including racking out joints, hacking for key, scrubbing down with water on brick or stone walls, complete all as specified and as directed.

Supply only integral waterproofing compound complete all as specified and as directed.

M&L for 5mm thick rendering in CM (1:3) on ceiling and finished the plastered surface even and smooth without using extra cement including including taking down old cement plaster including racking out joints, hacking for key, scrubbing down with water on brick or stone walls, complete all as specified and as directed.

Complete removal of existing treatment on walls and applying two coats of distemper oil emulsion paint over a coat of primer over and including 2mm thick wall care putty, complete all as specified and directed.

M&L for preparation of old decorated or plastered or unplastered surface of wall and applying one coat of white wash on ceiling, complete all as specified and directed.

M&L for preparation of old decorated or plastered or unplastered surface of wall and applying two coats of white wash on walls, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over 1 mm thick wall putty on internal wall including washing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes, complete all as per specified and directed.

M&L for complete removal of existing treatment on walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over New surface, complete all as specified and directed.

M&L for 15mm thick rendering in two layers, 5 mm thick in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls/ Chajja facias, roof projection (up to two story of bulding) including taking down old cement plaster from brick or concrete surfaces of any description including racking out joints,hacking for key,scrubbing down with water etc. and including preparation of newly plastered surface and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm,on walls, complete all as specified and directed. Note:-Water proofing compound shall be measured and paid seperately.

M&L for removing of existing APP membrane on the substrate with using torch machine & heating and mechanicals tools for hacking the surfaces and follow the steps given below :- (i) Chipping & cleaning of surfaces with the help of wire brush, wash the roof with clean water & remove all loose concrete, grease, oil using wire brush and scrubber all as specified and directed. (ii) Providing, mixing and applying polymer modified bond coat of Dr. Fixit or equivalent, pidicrete URP or equivalent mix in the ratio of 1:1 (URP 1: Cement 1) by volume to make it lumps free slurry when applied on the pre wet surface apply a single coat all as specified and directed. (d) Providing mixing and applying Dr fixit pidicrete URP (301) SBR polymer or equivalent(@minimum 2% bt wt of cement used) modified cement concrete for structural members with ratio 1:2:3 (ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size) with 25mm average thickness all as specified and directed. (e) Apply one coat of self-primer 1 liter of Dr. Fixit Roof seal Classic or equivalent(based on acrylate PU Hybrid Elastomeric emulsion technology reinforced with Nano fibers) diluted with 500ml water in the ratio 2:1 spreading at the rate of 0.80-10.0/Sq.mt/ liter in the SSD (Saturate Surface Dry) condition. After 3 hours of primer application, apply 1st coat of Dr.Fixit roof seal classic or equivalent without dilution spreading at the rate of 0.50liter/Sqm/ coat until all surface is covered. Allow the first coat to dry for approximately 4-6 hours before applying the 2nd coat at 90 degree to the first coat. Ensure there are no pinholes or air bubbles o the membrane surfaces. Apply second coat of Dr Fixit roof seal classic or equivalent without dilution spreading at the rate of 0.5 liter/sqmt coat to achieve total dry film thickness of 1.00mm at forced coverage at the rate of 1.00 litre/Sq.mt in 2 coats meet the exceeds the ASTM D 6083-97a standard specification. Attains a Tensile strength of ≥ 2.1 N/mm² with 45 GSM glass fiber mesh confirming to ASM D 412: Elongation at break ≥ 300% and crack bridging ability up to 2mm, Solar Reflectance Index as per ASTM E 1980-106, Air cure the coating for 7 day all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position including removing and refixing or air pipe etc and cleaning and removing all scale and dirt etc from tanks and moulds of circulating pipe etc and dispose the all scale dirt, sludge etc where directed and clean the surrounding area of the tank neat and clean of capacity exc 250 ltr and not exc 500 ltr, complete all as specified and directed by Engineer-in-charge.

S&F in repairs rotational moulded polyethylene water storage tanks 500 Liters (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.

S&F 20mm bore ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc., complete all as specified and as directed.

M&L for cleaning of existing exposed rusted reinforcement on walls/ceilings/ Chajjas (for building upto two storey) with wire/rotary wire brush,making surfaces free from loose materials,dirt etc and applying two coats of rust removal compound as per manufacturer's instructions, complete all as specified and directed.

M&L for 25 mm thick rendering on ceiling/walls/Chajjas (for building upto two storey) of old brickwork or concrete surface with structural grade repair mortar over a coat of epoxy based bonding agent, complete all as specified and as directed.

S&F mild steel TMT bars 5 mm dia. and over up to and including 10 mm dia. in stirrups, spacers, binders etc. cut to length, bend to shape required including cranking, hooking ends,fixed with chemical rebar fasteners as per manufacturer's instructions wherever as required, complete all as specified and as directed.

Notes (Applicable for Serial Item No 60.00 to 62.00) (i) Bidders shall visit site to ascertain the exact nature of damage before quoting the rates for these items as these items are considered for rehabilitation of structural damage in buildings. (ii) Contractor shall furnish five years guarantee for efficacy of the repair works .

S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste coupling, chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing of waste pipe, complete all as specified and directed

Supply only 32mm dia PVC waste pipe fixed in repairs including Cup bracket, complete all as specified and directed.

S&F in repairs Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) suitable for 32mm bore dia of discharge pipe, complete all as specified and directed.

S &F in repair vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including, flushing cistern low or high level, 32mm dia polyethylene flush pipe etc., complete all as specified and directed.

S&F in repair 10 ltr capacity PVC low level flushing cistern white colour including PVC connection PVC flush pipe of required length, complete all as specified and directed.

S&F in repairs bib taps fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S&F in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. .

S&F in repair 15 mm bore angle cock with flange complete all as specified and direcrted (Cat part No 8310 of Make-Prayag or its equivalent make).

S&F in repairs, Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed,complete all as specified and directed.

S&F sinks with drainage board made of 1mm thick stainless steel sheet including plugs, washers, waste coupling and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed.

S&F stainless steel kitchen plate rack of overall size 900 mm (L) x 750 mm (W) x 250 mm (D), complete all as specified and directed.

S&F in repair 15mm bore PVC connection pipe with PTMT nut of length 450 mm, complete all as specified and directed.

Supply and fixing in repairs, brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms), complete all as specified and directed.

S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old soil pipe with fittings, complete all as specified and directed.

S&F 110mm dia PVC bends of any radius provided with acess door, complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old soil pipe with fittings, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends 75mm any radius provided with acess door, complete all as specified and directed.

S&F in repair Gun metal Gate Valve 20mm bore with iron wheel head, screwed both end for iron pipe, complete all as specified and directed.

S&F 50mm bore high density poly ethylene pipes (HDPE) of pressure rating 6 Kg/Square cm fixed to walls, ceiling or in floors etc., complete all as specified and as directed.

M&L for,cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, in stone concrete block or slab walls, complete all as specified and directed.

Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site as directed

Supply and laying of GI water tubing medium grade of size 15mm conforming to IS 1239 ISI marked including all GI fitting screws, bend, tee, union, nipple, flange etc laid in floor or fixed on wall and ceilings complete all as specified and directed.

Refixing 15mm old steel tubing and connecting in new or old position (walls, ceiling, floors)etc, complete all as specified and directed.

Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and directed.

Supply and laying of GI water tubing medium grade of size 20mm conforming to IS 1239 ISI marked including all GI fitting screws, bend, tee, union, nipple, flange etc laid in floor or fixed on wall and ceilings complete all as specified and directed.

Refixing 20mm old steel tubing and connecting in new or old position (walls, ceiling, floors)etc, complete all as specified and directed.

Taking up or down GI tubing 25mm bore pipe and connection including cleaning and refixing 25mm old steel tubing and connecting in new or old position (walls, ceiling, floors)etc, complete all as specified and directed.

Supply and laying of GI water tubing medium grade of size 25mm conforming to IS 1239 ISI marked including all GI fitting screws, bend, tee, union, nipple, flange etc laid in floor or fixed on wall and ceilings complete all as specified and directed.

Refixing 25mm old steel tubing and connecting in new or old position (walls, ceiling, floors)etc, complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water and M & L for rendering 10 mm thick plaster in CM (1:4) on fair faces of brick work or concrete surfaces finish even and fair without using extra cement complete all as specified and as directed.

M&L for bricks, sub class B, laid flat, as in drain, old size bricks, jointed in cement mortar (1:6) and pointed in cement mortar (1:3) after dismantling of Bricks (laid flat in floors, channels, kerbs, aprons, etc. (each layer) complete all as specified and directed.

M&L for bricks, sub class B, laid on edge in floors, old size bricks, jointed in cement mortar (1:6) as drain and pointed in cement mortar (1:3) after dismantling of Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) complete all as specified and as directed.

S&F in repair aluminium anodized hasp & staple 75mm long with hinge pin, including bolt to hinge pin, including bolt to hinge plate and fixed with screws, complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams, etc., complete all as specified and as directed.

INTERNAL ELECTRIFICATION Taking down carefully copper/ aluminium point wiring (light/fan/bell/ holder/socket or power point) complete inclusive of all fittings such as switches, ceiling roses, pendants, regulators, sockets, fittings etc. removing materials from site and making good disturbed surfaces of floors/walls/ceiling etc., complete all as specified and directed.

Taking down carefully aluminium sub main wiring of any type and size including fittings and fixtures, removing materials from site, complete all as specified and directed.

Disconnecting from electric circuit and taking out existing unserviceable MCB DB SPN of any number of ways including MCB etc removing materials from site, complete all as specified and directed.

Taking down ceiling fan and dismantle blades and deposited to AGE E/M store for re-fixing, complete all as specified and directed.

Disconnecting from electric circuit and taking out electric meter from the existing sheet metal enclosure and deposited to AGE E/M store for re-fixing, complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sqmm PVC insulated and unsheathed multistranded FRLSH copper conductor cable 1100 volts grade, single core, drawn through and including PVC concealed conduit (medium grade) not less than 20mm size complete with all fittings and accessories suitable for one light / one fan/ bell point controlled by one switch including unsheathed single core stranded copper cable of size 1.5 Sqmm as earth continuity conductor connected to common earth and earth dolly and to be terminated to sunken/pressed flush box readily available covered with modular outer plates/inner plates etc as per site requirement and making good disturbed surfaces of walls,floors etc complete all as specified and as directed. Note:- 1. Modular metal box shall be measured and paid separaely as ''Supply'' only for mounting modular switches sockets, fan regulators including testing on completeion complete all as specified and as directed. 2. Modular plate with frame shall be measured and paid for separately.

All as per Serial Item No.107.00 here in before but for,one 3 Pin 5 Amps modular socket outlet on same board with other switch, complete all as specified and directed.

All as per serial item No.107.00 here-in-before but for one 3 pin 5 amps modular switch socket outlet on independent board.

All as per serial item No.107.00 here-in-before but wiring with 2.5 Sqmm including 2.5 Sqmm PVC insulated unsheathed multistranded FRLS copper conductor cable 1100 volts grade, single core earth continuity conductor connected to common earth dolly for one 3/5 pin 15 amps switch socket out let on independent board.

M&L for concealed point wiring with 1.5 Sqmm PVC insulated and unsheathed multistranded FRLSH copper conductor cable 1100 volts grade, single core, drawn through and including PVC concealed conduit (medium grade) not less than 20mm size complete with all fittings and accessories suitable for one light controlled by two way switch including unsheathed single core stranded copper cable of size 1.5 Sqmm as earth continuity conductor connected to common earth and earty dolly and to be terminated to sunken/pressed flush box readily available covered with outer plates/inner plates etc as per site requirement and making good disturbed surfaces of walls,floors etc complete all as specified and as directed. Notes - 1. Cost of metal flush box and cover plate shall be inclusive in quoted rated. 2. Modular metal box shall be measured and paid separaely as ''Supply'' only for mounting modular switches sockets, fan regulators including testing on completeion complete all as specified and as directed. 3. Modular plate with frame shall be measured and paid for separately.

S&F modular switch 6 Amps, 230 V, single pole, one way, 1 module complete all as specified and as directed.

S&F modular switch 16 Amps, 230 V, single pole, one way, 1 module complete all as specified and as directed.

S&F modular 2 way switch 6 Amps, 230 V, single pole, one way, 1 module complete all as specified and as directed.

S&F modular bell push 6 Amps 230V, single pole, one way, 1 module complete all as specified and as directed.

S&F bell multi music type AC 230 V, single pole complete all as specified and as directed.

S&F modular step type fan regulator suitable for ceiling fan of 1200mm sweep, of suitable watts, 2 module complete all as specified and as directed.

S&F socket,modular type 2/3 pin combined 2 module, 6 Amps, 230V complete all as specified and as directed.

S&F socket, Modular type 2/3 pin combined 2 module, 6 /16 Amps, Complete and all as specified as directed.

S&F ceiling rose, surface bakelite, 65mm x 50mm three terminals complete all as specified and as directed.

Supply only modular metal flush box of 02/01 module complete all as specified and as directed.

Supply only modular metal flush box of 03 module complete all as specified and as directed.

Supply only modular metal flush box of 04 module complete all as specified and as directed.

Supply only modular metal flush box of 08 module complete all as specified and as directed.

Supply and fixing for modular cover plate with frame 02/01 module complete all as specified and as directed

Supply and fixing for modular cover plate with frame 03 module complete all as specified and as directed

Supply and fixing for modular cover plate with frame 04 module complete all as specified and as directed

Supply and fixing for modular cover plate with frame 08 module complete all as specified and as directed

Material and labour two single core PVC insulated unsheathed cable 6.0 sqmm (Nominal area) two run with multistranded copper conductor cable, 1100 volts grade, drawn through and including PVC concealled conduit with not less than 25 dia. accessories and continious earth wire of single core PVC insulated, unsheathed cable 6.00 sqmm (Nominal area) with multistranded stranded copper conductor (green)one run 1100 volts grade for sub main wiring and making good disturbed surfaces complete all as specified and as directed. Note:- (i) Two run of wiring cable, one run of earth wire shall be measured as one unit.

Material and labour two single core PVC insulated unsheathed cable 4.0 sqmm (Nominal area) two run with multistranded copper conductor cable, 1100 volts grade, drawn through and including PVC concealled conduit not less than 25mm dia with accessories and continious earth wire of single core PVC insulated, unsheathed cable 4 sqmm (Nominal area) with multistranded copper conductor (green)one run 1100 volts grade for sub main wiring and making good disturbed surfaces complete all as specified and as directed. Note:- (i) Two run of wiring cable, one run of earth wire shall be measured as one unit.

Material and labour two single core PVC insulated unsheathed cable 2.5 sqmm (Nominal area) two run with multistranded copper conductor cable, 1100 volts grade, drawn through and including PVC concealled conduit with accessories and continious earth wire of single core PVC insulated, unsheathed cable 2.5 sqmm (Nominal area) with multistranded not less than 20mm dia copper conductor (green)one run 1100 volts grade for sub main wiring and making good disturbed surfaces complete all as specified and as directed. Note:- (i) Two run of wiring cable, one run of earth wire shall be measured as one unit.

Supply and fixing LED lights fitting 1x 20W, 220V, 4 feet inverter/rechargeable type, cool day light 6500K, battery with backup time upto 4 Hrs at fully charged condition, auto cut off feature on full charge, with lithium-ion battery of 4000mAh, minimum 450 lm backup lumens, voltage surge protection upto 4 KV, 15000 Hrs burning life under normal conditions, complete all as specified and directed.

Supply and fixing LED light fittings 1x10W watt, 220V, 2 feet inverter/rechargeable type, cool day light 6500K, battery with backup time upto 4 Hrs at fully charged condition, auto cut off feature on full charge, with lithium-ion battary of 2600 mAh, minimum 450 lm backup lumens, voltage surge protection upto 2.5 KV, 15000 Hrs burning life under normal conditions, complete all as specified and directed.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including GI bracket, clamps,nuts & bolts, complete all as specified and directed.

Supply and fixing, LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size,complete all as specified and directed.

Supply and fix, Fancy lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix LED bulb 12 W, rechargeable type, cool day light upto 4 Hrs of battery backup lithium-ion battary, minimum surge protection upto 4 KV, normal protection of 360V, B-22 base, 6500K mimium 300 lumen backup lumens, 15000 Hrs burning life under normal conditions, complete all as specified and directed.

S&F sheet metal enclosures MCB DB 4 way TPN, Vertical type , double door, IP54 Protection with 200 Amp rated bus bar including earth & neutral link, complete fixing acessoreies, complete all as specified and directed.

S&F sheet metal enclosures MCB DB 8 way SPN, double door, IP54 Protection with 200 Amp rated bus bar including earth & neutral link, complete fixing acessoreies, complete all as specified and directed.

Supply and fix, Miniature circuit breaker (MCBs) Single Pole, 240 Volts, 10KA, 6 to 32 Amps, 'C' curve complete all as specified and directed.

Supply and fix MCB SPN 6 to 32 Amps 10KA ‘C’ series 240 volts complete all as specified and as directed.

Supply and fix Miniature circuit breaker (MCBs) Triple Pole and Neutral, 415 Volts, 63A, breaking capacity 'C' curve, complete all as specified and directed.

Supply and fix, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240V, complete all as specified and directed.

Hanging only ceiling fan (M.D. supply) and connecting up including provision of 1.5m anti suicidal down rod not less than 12mm , with necessary clamps , nuts , bolts and welding work if required including cutting of existing false ceiling board and provision of 1.5 Sqmm PVC insulated unsheathed multistranded (green colour) copper conductor cable 1100 volts grade, single core, earth continuity conductor cable from ceiling rose or connector to fan, complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, anti suicidal down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and including provision of PVC insulated sheathed round flexible wire with multistranded copper condictor of size 1.50 Sqmm 3 core 1100 volts, complete all as specified and directed.

Taking down Ceiling fan,dismantling blades and removing fan and blades deposited to E/M store, complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep, heavy duty with, blades, frame and louvers with all grouting & fasterners including cutting of walls for fixing of exhaust fan and making good the disturbed surface with plaster with CM 1:4 complete all as specified and directed.

Fixing and connecting electric meters upto 25 amps, complete all as specified and directed.

Supply and Fix in repair,meter box/DB box made of 2.00 mm thick MS Sheet 600mm X 900mm X 250mm with double leaf door and suitable locking arrangement with iron bus bar system for provision of hole for mounting of Electric meter and DBs duly painted both externally and internally wiring and making good disturbed surface of walls/floors complete all as speciied and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600mmx600mmx6mm thick buried directly in gournd (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanized 4 mm dia earth wire as earthing lead upto 7.5 mtrs from testing point fixed by means of steel bolts, nuts, check nuts and washer, of galvanized earth wire protected by 25mm bore medium grade galvanised iron pipe and other end connected to earthing test point including funnel with watering pipe of 20mm bore light grade galvanised iron, wire mesh, charcoal or coke and common salt in alternate layer of 15cm (Compacted thickness) all around earth electrode with concrete earth pit in PCC (1:3:6) type C-1 50mm thick precast RCC M-20 nominal mix cover slab of size 450mm x 450mm reinforced with 8mm dia TMT bar 10 cm C/C and suitable handle of 10mm dia round bar including necessary execavation, earth work in soft / loose soil and deposited soil to a distance n.exc 50 M and necessary testing complete all as shown in electrical plate No. 3 of MES shedule of SSR Part-I complete all as specified and as directed.

Supply and fix GI wire dia 4 mm size complete all as specified and as directed.

Cutting & screwing existing steel tubing of size 15 mm dia for alterations or additions or lengthening screw on pipe to form connector and done in position without taking down all as specified and directed.

Supply and fixing Stop cock brass 15 mm dia with chromium plated for iron pipe ISI marked with screw end and fancy type, complete all as specified and directed.

S&F 15mm dia cast copper alloy Bib tap with crutch or butterfly handle, screwed down, screwed with chromium plated for iron pipe and fixed fancy type, ISI marked, complete all as specified and directed.

S&F Geyser 240 volt 2 KW, AC 25 Ltrs capacity BEE 5 star rated with ABS body PUP insulation with power input 2000 W voltage supply 230 v, 1 phase, 50 Hz, AC , Feroglas dry powder coating cold rolled MS water Tank with Hot and Cold connection pipe and complete installation accessories all as specified.

Taking down / out unserviceable or serviceable LT UG cables LT UG cables of nominal Cross Sectional Area 95 Sqmm 3.5 core and connections including Bricks, GI pipes, etc of any description laid in trenches and / or fixing with walls / Poles, complete all as specified and as directed.

Taking down / out unserviceable or serviceable LT UG cables LT UG cables of nominal Cross Sectional Area 35 Sqmm 3.5 core and connections including Bricks, GI pipes, etc of any description laid in trenches and / or fixing with walls / Poles, complete all as specified and as directed.

Dismantling of Old U/S LT Panel Board of any make / capacity / description alongwith all its accessories complete from existing position, complete all as specified and as directed.

Excavation in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth and getting out in hard dense soil for taking up/relaying LT UG cable/pipe, complete all as specified and as directed.

Returning, filling in excavated earth work including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any strata, complete all as specified and as directed.

Removing excavated soil to a distance n.exc 50m, depositing where directed at a level n.exc 1.5m above the starting point in soil complete all as specified and directed.

M&L for sand cushioning (dry) in trenches for protection of UG cables (below, above and around the UG cable laid in trenches) of 230mm spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed.

M&L for brick sub class B locally available best quality laid in trenches above sand cushioning for cable protection, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core, complete all as specified and directed.

Supply and fix Galvanised Iron pipe 80mm bore (dia) 'Light Grade' for protection of UG cable, laid in floors/Road crossing, fixing to pole with mild steel clamps, Nuts, Bolts, etc, complete all as specified and directed.

Supply and fix Galvanised Iron pipe 50mm bore (dia) 'Light Grade' for protection of UG cable, laid in floors/Road crossing, fixing to pole with mild steel clamps, Nuts, Bolts, etc, complete all as specified and directed.

Boring under road or floor by mechanical or manually in any type of soil of bore size 100mm to 25mm, complete all as specified and directed.

M&L for cutting the road/hard standing and making good disturbed surface by using PCC type C2 (1:3:6) by using 20 graded stone aggregate for the fixing the pipe, complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized earth strip of size 32 x 6 mm as earthing lead by means of nut, bolts and washers made out of galvanised iron and 40 mm bore GI pipe "light grade" for protection of earth lead and connected to control board or main switch or as directed by Eng-in-Charge including earthing pit in PCC (1:3:6) type C-1, pre-cast RCC (1:1.5:3) cover slab of size 600 x 600 x 100 mm reinforced with 8 mm dia TMT bars @ 150 mm c/c and one handle made out of 8 mm dia round bar, 20 mm bore GI pipe medium grade for watering, funnels, wire mesh and provided charcoal and common salt in alternate layers of 15 cm thick including necessary earth work complete all as shown in electrical plate No 3 of SSR Part I and testing complete all as specified and as directed. Note :- (i) The earthing pit should be provided with proper earth pit and pit cover. Pit cover should be painted with synthetic enamel paint of approved colour and pit number to be marked on GI plate above 45 cm from GL as per colour code followed in AF Station. (ii) If the desired earth resistance is not achieved during testing as per IS the complete earthing shall be carried out by the contractor at his own cost and no extra claim shall be admissible.

Taking up or down existing steel tubing and connections 50mm bore, complete all as specified and directed.

Taking up or down existing steel tubing and connections 25mm bore, complete all as specified and directed.

Taking up or down existing steel tubing and connections 20mm bore, complete all as specified and directed.

Excavating in trenches not exc.1.50m wide and not exc. 1.50m in depth for foundation etc and getting out in soft /loose soil, complete all as specified and directed.

Supply and fix for 50mm bore GI tubing medium grade laid in trenches with all fittings such as bend, unions, tee, elbow, reducer including testing, complete all as specified and as directed.

Supply and fix 50mm dia Gun Metal gate valves with iron wheel head ,screwed both ends for iron pipe and fixed all as specified and directed.

Supply and fix 25mm dia Gun Metal gate valves with iron wheel head ,screwed both ends for iron pipe and fixed all as specified and directed.

M&L for reconstruction of brick masonry valve pit of size 90cm x 90cm x 90cm (internal dimension) with one brick thick PCC 1:4:8 type D-2 (using 20mm graded crashed stone aggregate ) as in foundation concrete incl PCC (1:3:6) type Cl (using 20mm graded crashed stone aggregate) as in bedding and coping 10mm thick cement plaster in Cement mortar (1:4) internally & externally upto 15cm below ground level providing valve pit 50x50x6mm angle iron frame all round the fixed point by means of 4 Nos hold fast 150mm long made out of flat iron 40 x 6 mm embedded in PCC block (1:2:4) type B-I (using 20mm graded crashed stone aggregate) of size 230 x 200 x 100mm incl provn of hing welded with angle iron frame and Mild Steel cover 3mm thick, Mild steel handle of suitable and size welded with Mild steel cover & suitable locking arrangement & applying two coats of synthetic enamel paint over a coat of red-oxide primer incl necessary excavation work in soft/loss soil complete all as specified and directed.

Note:- Schedule of credit (Sch 'A' Part- II) amount of Rs 2,17,566.50 shall be deducted from the total quoted amount of BOQ.

M/s DEBAJIT BORTHAKUR (BID ID -3426228)

VARNI BUILDERS (BID ID -3423880)

M/S. SUBHAS CONSTRUCTION CO. (BID ID -3426225)

Gravell (BID ID -3422155)

M/S JALALUDDIN AHMED (BID ID -3425223)

BAYAJ UDDIN MAZUMDER (BID ID -3426280)