Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹56.9 LAccepted-AOC 578 AVAS VIKAS JANAKPURI B IZATNAGAR BAREILLY 243122 UP | BAREILLY | UTTAR PRADESH | 243122 | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹62.6 L+₹4.2 L (7.20%)Rejected-AOC | L-2 | Rejected-AOC L-2 | |
| 3 | L-3₹63.5 L+₹5.1 L (8.71%)Rejected-AOC 232 1 D SHIVLOK KANKARKHERA DISTT MEERUT UP PIN 250001 | MEERUT | MEERUT | UP | 250001 | L-3 | Rejected-AOC L-3 | |
| 4 | L-4₹65.6 L+₹7.2 L (12.3%)Rejected-AOC 37 B MODEL TOWN NEAR HARI MANDIR BAREILLY UP 243001 | BAREILLY | UTTAR PRADESH | 243001 | L-4 | Rejected-AOC L-4 |
Tender Value
₹86.8 L
EMD Value
₹1.6 L
Closing Date
3 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bareilly
HEADQUARTERS, COMMANDER WORKS ENGINEER, MILITARY ENGINEER SERVICES, STATION ROAD, BAREILLY CANTT, PIN 243001
CA NO. CWE BLY / GE(E) / 45 OF 2022-23 SPL REPAIR TO BLDG NO T-204 BW LINES, MD ACCN BLDG NO P-01 (01 TO 08) (08 QTRS) AND BLDG NO P-2 (01 TO 08) (08 QTRS) OF FD HOSPITAL UNDER GE(E) BAREILLY
2022_MES_541801_1
8200/B/733/E8
Open Tender
Civil Works
Item Rate
270 days
Bareilly
Class C Category a(i) For Unenlisted Contractor - Meeting enlistment criteria of MES with regard to having satisfactory completed requisite value of work, Annual turnover, working capital , etc as mentioned in NIT.
6 documents required · 6 mandatory
₹1,000
GE ( E ) Bareilly
₹1.6 L
Yes
17 Sept 2022
29 Jul 2022
10 Sept 2022
29 Jul 2022
3 Sept 2022
20 Aug 2022
Amount
Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed.
Demolition of Concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of Reinforcement cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed.
Taking down eaves gutters and rainwater pipes 75 mm dia , including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.
Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.
Taking up or down20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.
Dismantling water tanks 500 & n exc 1000 and removing to store of all retrieved material) complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed.
M & L 25 mm thick PCC 1:2:4 type B0, using 12.5mm graded aggregate as in floors to receive surface of tile complete all as specified and directed.
M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.
M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.
M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.
M&L for non skid ceramic tiles 9 to 10 mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed
M&L for non skid ceramic tiles 9 to 10 mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm on vertical surfaces etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed.
M & L for 7 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.
M&L Machine cut kota stone slab flooring 18-20 mm thick and size exc 0.16 sqm jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and treating the surface incl complete all as specified and directed.
M&L for 18-20 mm thick Machine cut kota stone slab as in riser and steps, skirting in full length in single peice without joint, with groove cutting in double line of stair width laid over cement screed and jointed with rubbing and treating the surface incl bull nosing complete all as specified and directed.
M&L 18-20 mm thick Granite of any colour (tablee rubbed and polished) as in windows cill & cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and directed.
M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .
M& L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed
M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed
M&L for cement Concrete coloured interlocking paver blocks shall be factory made with casting in rubber/pvc moulds & compacting on a vibro table assembly and shall be cured in curing tank for atleast 14 days and then air dried before use. The paver block shall be confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade. Approved design, shape, size and colour of top layer complete all as specified and directed.
M&L for precast machine pressesd glazed rubber moulded PCC (1:2:4) type B0 using 12.5 mm graded aggregrate, including weathering, slightly rounded or chemferred angles and throating ,edges joint filling with in CM 1:4 including excavavtion for kerb stone complete all as specified and directed .
M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent , complete all as specified and directed. (reinforcement to be measured & paid under respective items).
M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in Lintel/Roof beam and chajja including bonding agent complete all as specified and directed (reinforcement to be measured & paid under respective items).
S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) completed all as specified and directed.
S&F Form work to sides and soffits of floor or roof beam, beam hings, girders bressume, lintles, contilevers, shelves,Chajjas including support over lungs etc also splays between floor and beams etc. completed all as specified and directed.
M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified and directed
Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed
S&F Mild steel TMT bars 6 to 8mm dia complete all as specified and directed
S&F Mild steel TMT bars 5mm dia and over upto and including 10 mm dia in stirrups,spaces and binders complete all as specified and directed
M&L PCC 1:5:10 type E-2 (40 mm to 80 mm graded brick aggregate) as sunken sub base of floor fillings complete all as specified and directed
S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed
M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces or on fair faces of brick masonary fair finished without using extra cement with using water proofing liquid complete all as specified and directed
M&L rendering 10 mm thick in CM 1:4 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.
M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.
M &L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregrate laid over roof slab after applying cement slurry for filling undulationations finished even and smooth without using extra cement complete all as specified and directed.
M & L for cool roof antislip tiles 300x300x10 mm with high SRI value not less than 90 laid over existing treatment on accessible roof and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
Supply Integral water proofing Liquid.
S & F in repair 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed.
S&F for 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .
S&F 35mm thick factory Glazed and skeleton shutters, open rebated of 2nd class HW, second class hard wood rail and stles and prepared to receive glass, gauze, etc. (without sash bars), divided into squared, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed (Note :- S & F Glass/gauge shall be measured and paid for separately)
S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F 150 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring fixed in floor complete all as specified and directed.
S & F Solid Prelam PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing complete all as specified and directed
S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 complete all as specified and directed.
S&F of Steel windows with pressed steel frame ( size 95x45x1.25mm) side hung shutter including box type hinges with steel handle, and steel peg steel complete with glazed openable shutter with glazing bar (open out side) and wire gauged openable shutter without glazing bar ( open in side) dovetailed or welded complete all as specified and directed and all as per Drg No TD/088 dt 07 jan 2002 Note:- (i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling of PCC in frame deemed to be included in quoted rate. (ii) MS grill shall be measured and paid seperatly under relevant item of schedule
S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.
S & F 300 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.
S&F 100 mm size butt hinges medium weight stailess steel complete all as specified and directed
S&F 200 mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as specified and directed
S&F 300 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed
S&F 18 mm thick imported wooden medium density fibreboard fixed with frame incl hold fast ( as in shutter incl knob in each shutter) etc including magnet catcher built in cup board with all necessary fittings complete all as specified and directed.
S & F hydraulic concealed hinge with clip on installation and integrated Silent System, opening angle not less than 100º, For shutter thickness 15 - 24 mm full overlay type shutters, hinge cup dia 35 mm including necessary fixing arrangement with SS screw complete all as specified and directed.
S&F 200 mm long Stainless Steel glossy finish handles with SS screw complete all as specified and directed
S&F 1000 litres, rotational moulded polyethylene of white colour in tripple layer water storage tank (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed
S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed
S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.
S & F in repair fancy type 150mm size square brass CP shower rose complete all as specified and directed
S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified directed.
S&F fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed.
S&F in repair stainless steel of AE - SI 316 grade tubular towel rod including apair of CP brass bracket complete all as specified and directed
S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified and directed
S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed
S & F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed
S&F in repairs of 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as specified and directed
S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed.
S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed
S & F Brass CP health faucet ABS body with 8mm Dia 1.25 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body complete all as specified and directed
S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.
S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.
S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.
S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
S & F PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed.
S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified and directed.
S & F in repair 0.8 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm) , incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed.
S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and directed.
S&F in repair Framed work as in doors or gates and cooler platform of angle or other section with gusset plates, rails, braces fixing to wall etc. including either hooks or fastening and fixing upto second story Building FE 290 Gde E-165 complete all as specified and directed.
S&F in repair steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed
S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed
S&F in repair Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in ridge hips valley gutter, drip and straight flashing with self tapping screw or cranked hooks bolts complete all as specified and directed
M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting exc 10cm and not exc 40cm girth in brick walls complete all as specified and directed.
Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposingthe reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical , apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx50 mm (10 mm gauge welded mesh ) & tack , securing with clips / blinding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement as per manufacturer instruction cleaning & removing of waste meterial etc as dirply two coat of approved make of WPT on new coat ezee at interval of 8 hours cure for the surfaces complete all as specified and directed.
M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.
M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over and including one coat of primer complete all as specified and directed.
M&L for complete removal of existing treatment on walls etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of cement base paint over and including one coat of primer complete all as specified and directed.
M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper over and including 1mm thick wall care putty complete all as specified and directed.
M&L for complete removal of existing treatment on walls etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of oil bound distemper over and including 1mm thick cement based in wall care putty complete all as specified and directed.
M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
M&L for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of white wash complete all as specified and directed.
Taking down wooden roof truss 4 M to 8 M complete all as specified and directed.
Dismantling timber scantlings 40 Sqcm and over in section, in any position , framed work complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) insulation boards / slabs / blankets of any thickness, including cover fillets complete all as specified and directed.
Demolition of cement concrete (un-reinforced) and paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.
Demolition/dismantling of RCC beam , chajja , shelve and similar suspended work complete all as specified and directed.
M&L for rolled mild steel in roof trusses (framed) trussed purlins, crane gantries, rails and fastenings including distance pieces, cleats etc complete all as specified and directed.
M&L for rolled mild steel in rolled section as in main and cross beams, hip and jack rafter, purlins where conencted to common after and running rails, fixed with angle cleats or other connecting plates complete all as specified and directed.
Providing & fixing false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications & drawing.
M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels & wall band over 1.5m span etc complete all as specified and directed.
M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in chajja, beams etc complete all as specified and directed.
S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.00mm thick tinted glass fixed with rubber gasket with aluminium beading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.20mm thick with rawl plug (b) Top and Bottom Rail : 112x44x1.20mm thick (c) Middle and style : 85x44x1.20mm thick (d) Aluminium beading : 0.7mm thick (e) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of other part of steel heavy duty (g) Making good of wall surface to match with existing surface complete.
S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.00mm thick grill and SS mosquito net fixed with rubber gasket with aluminium beading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.20mm thick with rawl plug (b) Top and Bottom Rail : 112x44x1.20mm thick (c) Middle and style : 85x44x1.20mm thick (d) Aluminium beading : 0.7mm thick (e) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of other part of steel heavy duty ( Make Sandhu ISO marked or its equivalent approved make) (g) Making good of wall surface to match with existing surface complete.
S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlocking closing (vi) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.
S&F Powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below (i) frame :45.2mm x35mm X 1.15 mm (ii) Aluminium beading - 0.7mm thick (iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing. (iv) Aluminium neccessary fittings complete as required basis. (v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.
M & L powder coated aluminum window/ doors grills fixing along with frame of following specification, grills with opening 69.4mm X 78.2mm grills thickness shall be of 6.4mm X 5.8mm having weight not less than 2.306 Kg/per sqm shape as ordered with frame channel of 34 X 11mm X1.7mm thick fixed with screw inside of the window complete all as specified and directed.
M & L 9 to 10 mm thick glazed coloured ceramic tiles ( square/ rectangular) , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.
M&L Virified tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in Vertical surface as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L Virified tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.36 sqm, in Vertical surface as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified.
S&Fin repair fancy type stainless steel towel rack size 600mm X 300mm including apair of brass bracket complete all as specified & directed by Engr in charge. Make Jaguar or equivalent
S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified and directed.
S&F in repair vitreous China coloured European type WC with "P" or "S" trap white including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etcplastic water seat white/black pattern flat bottom and cover and mild stel chroumium plated complete all as specified and directed.
S&F in repairs, vitreous China bowl urinal flat back size 430x370x340 with grating and union for discharge pipe excluding flushing cistern flush pipe and waste pipe complete all as specified and directed.
S&F 500 litres, rotational moulded polyethylene of white colour in tripple layer water storage tank (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed.
E&M Part: Taking down carefully copper/aluminium point wiring light, fan, socket or power point complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings, bell push, bell buzzer etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
Taking down main switch / MCB/ DBS including MCC Bs etc of any size removing for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces of wall, floors etc complete all as specified and directed
Taking down ceiling/exhaust fan and disconnecting, removing to store for keeping in safe custody for rehanging etc complete all as specified and directed.
Taking down sub main wiring/service cable including earth wire and making good disturbed surfaces to match with the existing surfaces of walls incuding removing of site complete all as specified and directed.
M & L for point wiring with 1.5 Sqmm cable, PVC unsheathed and insulated copper multistranded conductor, FRLS 1100 Volts grade cable (red colour cable to be used for live connection and black colour cable to be used for neutral connection) controlled by one way switch down through and including PVC concealed conduit with all accessories including 1.5 Sqmm copper multistranded conductor FRLS 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for one light/fan/bell point controlled by one switch/bell push complete all as specified and directed.
All as per item No 145 here-in-before but for 3 Pin, 5 Amps socket outlet point controlled by one switch on independent board.
All as per item No. 145 above but one 3 Pin, 5 Amps, switch socket outlet point controlled by one switch on the same board with other switch.
All as per item No 145 here-in-before but for one light point controlled by two 2 way 5 Amps switch complete all as specified and directed.
All as per item No 145 here-in-before but with 2.5 Sqmm, PVC insulated, sheathed cable and 2.5 Sqmm cable for earth wire for one 5 Pin socket out let 15 Amps.(Independent)
S&F Switch, Piano, flush type, polycarbonate, 5 Amps, Single Pole, One way complete all as specified and directed.
S&F Switch, Piano, flush type, polycarbonate, 5 Amps, Single Pole, two way complete all as specified and directed.
S&F Switch, Piano, flush type, polycarbonate, 15 Amps, Single Pole One way complete all as specified and directed.
S & F Bell push flush type 5 Amp complete all as specified and directed.
S & F Socket outlet, combination, 2 in 1, 3 Pin 5 Amp flush type complete all as specified and directed.
S & F Socket outlet, combination, 2 in 1, 3 Pin 5 Amp and 15 Amp multipurpose, flush type complete all as specified and directed.
S&F Bell AC 230 Volt single pole Ding Dong complete all as specified and directed.
S&F Lamp Holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
S&F of ceiling rose PVC polycarbonate, isolated body, 3 terminals AC 230 volt complete all as specified and directed.
S&F in repairslamp LED heat sink white with polycarbonate diffuser B-22 base cap retrofit type 220/230 Volts, 7/9 watt Make Surya/C&S/ Cromption complete all as specified and directed.
S&F LED Tube light fittings 1X/20 Watt,(T-8) 4' long 220V, AC decrotive box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of sutaible size from ceiling rose complete all as specified and directed.
S&F LED Tube light fittings 1X/20 Watt,(T-8) 2' long 220V, AC decrotive box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of sutaible size from ceiling rose complete all as specified and directed.
S&F in repairs LED bulk head luminaire 10 watt with Engineering plastic housing and oval shaped clear prismatic diffuser, heat sink integrated including one no. 10Watt LED lamp complete all as specified and directed.
S&F LED building security light fitting 25 Watt, 230Volt, AC outdoor type with high pressure die cast aluminium housing and heat resistance polycorbonate cover complete with driver, lamp and IP-65/66 protection complete all as specified and directed.
S&F LED Wall bracket type CITY-2 fitting 9 Watt complete all as specified and directed.
S&F in repairs stepped, (socket/switch type) electronic fan regulator flush type, 180 Watt, 240 Volts complete all as specified and directed.
S&F in repairs round shape 8 Watt 220 Volts AC recessed type with high efficiency PMMA diffuser soft glare ling complete with drivers, holders, LED lamp suitable or roof ceiling including connecting up withh three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F in repairs recess mounting LED ultra Slim ceiling light 2'x2', 35/36 Watt complete all as specified and directed.
Hanging only ceiling fan after cleaning, and remarking the serial MES fan nos etc complete including electric connection with three core flexible PVC insulated copper conductor multistranded white in clour 1.0sqmm cable (Item received form ser No107) complete all as specified and directed.
Fixing only Exhaust fan, cleaning all dust etc from surfaces of any size and remarking the serial MES fan nos. etc complete including electric connection with three core flexible PVC insulated copper conductor multistranded white in colour 1.0 sqmm cable complete all as specified and directed.
. M & L in repairs for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in & including PVC conduit complete all as specified and directed.
S&F in repairs sheet metal enclosures (DBS) when MCBs to be used 8 way, 240 Volts double door single pole & netural with 200 Amps rated bus bar complete all as specified and directed.
S&F in repairs MCB single phase and netural 32 A, 230 V 10 KA, 'B' curve type complete all as specified and directed.
S&F in repairs MCB SP 6A-32 A, 230 V 10 KA, 'B' curve type complete all as specified and directed make Havells/Indoasian
S&F in repairs GI bracket made out from GI pipe 32mm bore 1.2mtr long fixed on wall with all including nut, bolt and GI clamps of size 25x4mm as required and including painting complete all as specified and directed
Taking down service connection/UG cable removing of site complete all as specified and directed.
Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in soft/loose soil for laying of under ground cable and foundation of poles complete all as specified and as directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soil complete all as specified and as directed.
Removing of excavated soil not exc 50 m and depositing where as directed at a level n.exc 1.5 m above from starting point. complete all as specified and as directed.
Supply and laying bricks old size, well burnt sub class 'B' bricks as in protection cover for under ground cable laid width wise across the cable adjoining each other, laid dry complete all as specified and directed.
M&L for dry river sand cushioning for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top ebdge of cable after laying and punning up to 18 cm depth complete all as specified and directed. Note ;- For payment purpose the punned down thickness of 18 cm only shall be considered.
M& L for Boring holes under road or cutting the road /pavement /hard standing or any other situation by mechanical or other means for inserting 40mm bore GI pipe for crossing the cable and making good both the ends complete all as specified and directed.
S&F galvanized iron pipe of 40 mm bore, Light grade with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole or laid in floor complete all as specified and directed.
Supply, lay, joint, test and commisioning LT, XLPE insulated, screened, PVC bedded, armoured, heavy duty, electric cable with stranded aluminium conductor, 1100 Volts grade, cross sectional area 16 Sqmm, 4 core complete all as specified and directed. Note:-Excavation earthwork,sand cushioning & brick protection shall be measured & paid seperately.
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 240 Volts double door three phase & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F in repairs MCB three phase and neutral 1100A, 230V 10KA. B' curve type complete all as specified and directed complete all as specified and directed.
M & L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6. mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts,check nuts, nuts and washers of GI or steel all as shown in electrical plate No 5 of SSR-I 2009. GI wire protected by GI pipe light grade 15mm dia connected to earth test point including excavation in any type of soil, returning filling, disposal of soil, earthing pit in PCC (1:3:6) type C1,RCC (1:2:4) type B1 precast cover slab with one handle made out of 8 mm dia round bar,20 mm dia (medium grade) watering pipe and providing layer of charcoal or coke and salt in alternative layers complete as specified or directed & including testng on completion complete all as specified and directed Note : Tenderers may note that amount of credit Rs. 1,55,798.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.
TEAM ACC INFRABUILD PRIVATE LIMITED
Shikhar ji Enterprises
MOHINDER SINGH AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .