Construction of Rest House of Horticulture Department PCDO Harabag Tehsil Sundernagar Distt Mandi HP

Amount

Excavation in foundations, trenches etc.in earth work in all kinds of soil such as pick work, jumper work, blasting work, saturated soil , including chieslling or any other mixed variety of soil, dewatering and or removal of slush and other incidentalss, lift up to any heights, stacking the excavated soil upto any leads clear from the edge of excavation and then returISIng the stacked soil in 15 cm ( fifteen centemetre) layer when required in to plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then dinposing of all surplus excavated earth as per direction of Enginer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete 1:4:8 (one cement: four sand: eight graded crushed stone aggregates) 40mm (forty millimetre) nominal size) mechnically mixed and curing complete excluding cost of form work in: Foundation and plinth including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing form work with steel plates 3.15mm ( three point one five millimeter) thick welded with angle iron in frame 30x30x5mm (thirty X thirty X five millimeter) so as to give a fair fISIsh including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all height / depth of propping and centring below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work including carriage of materials with in all leads ,lifts and other incidentals.

Foundation footing and basis of columns etc. and mass concrete including plinth beams and columns upto plinth level including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Vertical surface such as walls ( any thickness ) partitions and the like including attached pillasters buttresses plinth and string courses and the like in all floor level including carriage of materials with in all leads, lifts and other incidentalss..

Stair case with slopping or stepped soffits , excluding landing but including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floors etc. upto all thickness including carriage of materials with in all leads, lifts and other incidentalss complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Edges of slabs and breaks in floors and walls upto any width in all floor level including carriage of materials with in all leads, lifts and other incidentalss complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying reinforced cement concrete design mix M-25 ( twenty five ) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforecement for reinfoced cement concrete work . The mix shall be designed as per requirement of I.S code and PWD specification . The design mix will be got approved from the Engineer - in - charge prior to the casting . The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S code .

Foundation, footings, bases of columns and the like and mass concrete including carriage of materials with in all leads, lifts and other incidentalss charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Column ,Pillars. Post and struts etc . up to all floor level including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Suspended floor roofs, landing and shelves and their supports balconies beams, girders , bressumers and cantilevers upto all floor level including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying upto all floor level reinforced cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm nominal size) to give a smooth and even surface including centring and shuttring etc. but excludig cost of reinforcement in mouldings as in cornices windows sills etc. not exceeding 15cm ( fifteen centimetre ) in girth including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying cement concrete work 1:2:4 (one Cement: two Sand : four graded stone aggregate 20 mm ( twenty millimetre ) nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work inSuspended Floor roofs, landing and shelves and their support balconies, beams, girders ,bressumers and contilever upto floor two level including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position including cost of binding wire complete upto all floor level including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying 20 cm ( twenty centimetre ) thick composit stone masonry with stone facing of chisel dressed stones one line dressed in cement mortar 1:6(one cement : six sand) and concrete backing with cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate ) 20 mm. ( twenty millimetre ) nominal size on inner face of walls including centring,shuttering and propping complete up to floor two level including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Precast concrete block masonry (including quions blocks,jamb blocks closer etc.) with soild concrete block of approved size made of cement concrete 1:5:10 (one cement: five sand: ten graded stone aggregate) 40mm ( forty millimetr e) and down gauge) in foundation and plinth upto floor two in Cement mortar 1:6 (one cement: six sand) including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Precast concrete block masonry in partition walls 10 cm( ten centimetre ) thick with solid block of approved size including quion blocks, jamb blocks, closer etc. made of cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate 40mm ( forty millimetre ) and down gauge) in Cement Mortar 1:6 (one cement: six sand) including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing factory made uPVC white coloure sliding glazed door comprising of uPVC multi- chambered frame with in - built roller track and sash extruded profiles duel reinforced with 1.60 + 0.2 mm ( one point sixty + zero point two millimetre ) thick galvanized mild steel section made from roller forming process of required length ( shape & size according to uPVC profile) appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket , wool pile , zinc alloy ( white powder coated ) touch locks with hook, zinc alloy body with single nylon rollers ( weight bearing capacity to be 120 ( one hundred twenty ) kg ) G.I fasteners 100 x 8 mm ( one hundred x eight mellimetre ) size for fixing frame to fISInhed wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred and fusion welded at all corners , including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent fISInhed wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality , all complete as per approved drawing & direction of Engineer in - charge ( single / double glass panes , wire mesh and silicon sealent shall be paid separately ) including carriage of material within all leads, lifts and other incidentals. Note:- For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable . Two track two panels sliding door made of big series) frame 67x50 mm ( sixty seven x fifty millimeter ) & sash 46x82 mm ( forty six x eighty two millimeter ) both having wall thickness of 2.3 + 0.2 mm ( two point three + zero point two millimeter ) and single glazing bead / double glazing bead of appropriate dimension ( area of door above 2.00 sqm up to 5.00 sqm ( two square up to five square metre ).

Providing and fixing factory made uPVC white coloure sliding glazed window upto 1.50 mm (one point fifty millimeter ) height dimension comprising of uPVC multi- chambered frame with in - built roller track and sash extruded profiles duty reinforced with 1.60 + 0.2 mm ( one point sixty + zero point two millimetre ) thick galvanized mild steel section made from roll forming process of required length ( shape & size according to uPVC profile) appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket , wool pile , zinc alloy ( white powder coated ) touch locks with hook, zinc alloy body with single nylon rollers ( weight bearing capacity to be 40 ( forty ) kg ) G.I fasteners 100 x 8 mm ( one hundred x eight mellimetre ) size for fixing frame to fISInhed wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred and fusion welded at all corners , including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent fISInhed wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality , all complete as per approved drawing & direction of Engineer in - charge ( single / double glass panes , wire mesh and silicon sealent shall be paid separately ) including carriage of material within all leads, lifts and other incidentals. Note:- For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable . Three track three panels sliding window with fly proof S.S wire mesh (two nos glazed & one No. wire mesh panels) made of big series) frame 116 x 45 mm ( one hundred sixteen x forty five millimeter ) & sash 46x62 mm ( forty six x sixty two millimeter ) both having wall thickness of 2.3 + 0.2 mm ( two point three + zero point two millimeter ) and single glazing bead / double glazing bead of appropriate dimension ( area of window above 1.75 sqm ( one point seventy five square metre ).

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position 2nd class Deodar wood. including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters 35 mm ( thirty five millimetre ) thick including black enamelled M.S. butt hinges. including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 19mm ( nineteen millimetre ) thick water proof Commercial Board in shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete) including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 19mm ( nineteen millimetre ) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately)6 mm ( six millimetre ) thick including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 1.00mm ( one millimetre ) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 1st class deodar wood. square edges cover fillets (beading) 19mmx6mm ( nineteen millimetre x six millimetre ) section including mitring at junctions with wood screws and nails including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing bright fISInhed brass handles with screws etc. complete 100mm ( one hundred millimetre) including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing magnetic catcher with screws etc. complete including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought,framed and fixed in position 1st class Deodar wood. including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 300x16mm ( three hundred x sixteen millimetre ) anodized alumISIum sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 250x10 mm ( two hundred fifity x ten millimetre ) aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of materials with in all leads, lifts and other incidentalss.

Providing and fixing 125mm ( one hundred twenty five millimetre ) alumISIum handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentalss.

Providing and fixing 100mm ( one hundred millimetre ) bright fISInhed brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete. including carriage of materials with in all leads, lifts and other incidentals.

25 mm cement concrete flooring 1:2:4 ( one cement: two sand : four stone aggregate of size 12.5 mm ( twelve point five millimetre ) and below) laid over base concrete and finished with a floating coat of neat cement (base concrete to be paid saparately). including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 8mm ( eight millimetre ) thick flooring manufactured of approved shade & colour in flooring treads of steps & landings laid 3mm ( three millimetre ) thick profile required complete including carriage of materials with in all leads, lifts and other incidentals.

providing and fixing 15mm ( fifteen millimetre ) thick anti extrior skid water proof stain & impect resistent heavy duty vetrified tiles Nitco or equivalent 450 x 450 mm ( four hundred fifty x four hundred fifty millimetre ) manufactured of approved shade & colour in flooring , treads of steps & ladings laid over 12mm ( twelve millimetre ) thick cement mortar 1:3 ( one cement: three sand ) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials with in all leads, lifts and other incidentals.

Providing & fixing 10mm thick anti skid water proof stain & impect resintent heavy duty vetrified tiles Nitco or equivalant 600mmx600mmx10mm ( six hundred x six hundred x ten millimetre ) manufactured of approved shade & colour in flooring, treads of steps & landings laid over 12mm ( twelve millimetre ) thick cement mortar 1:3 ( one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specification including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying spartic ceremic tiles 5.5mm. ( five point five millimetre ) thick in flooring 300 x300mm. ( three hundred x three hundred millimetre ) size treads of steps laid on a bed of 12mm ( twelve millimetre ) thick cement mortar 1:3(one cement: three sand) finished with flush pointing in white cement complete as per specification including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying granite stone in flooring 20mm ( twenty millimetre ) (average) thickness base of cement mortar 1:3 (one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polinhing complete. 20mm ( twenty millimetre ) thick in all floors including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing second class deodar wood. 40 mm ( forty millimetre ) thick plain framed panelling with necessary screws priming coat on unexposed surface etc. complete. including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and laying 300 x 600 mm( three hundred x six hundred millimetre ) in digital ceremic tiles on wall skirtting in room laid on 12mm.( twelve millimetre ) thick cement mortar 1:3(one cement: three sand) finished with flush pointing in white cement mixec with pigment of required shade to match the shade of tiles including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

15mm ( fifteen millimetre ) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering above floor to all level including arrines, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm ( eighty millimetre ) in girth and fISInhed even and smooth. in cement mortar 1:4 (one cement : four sand) including curing and carriage of materials with in all leads , lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

6mm ( six millimetre ) thick Cement plaster to ceiling In Cement mortar 1:3 (one Cement: three Sand) including curing and carriage of materials with in all leads , lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 0.60 mm(Zero point sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polister (RNP) organic coating of 20 ( twenty ) microns over 5(five ) microns primer coating + back coat of polister of 5(five) microns over 5(five ) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm( six millimetre ) dia with prepainted GI limpet and rubber washer complete with all accessories as required as per the direction of Engineer-in-Charge complete as per specification including carriage of material within all leads, lifts and other incidentals charges.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm ( one point sixty six millimetre to two millimetre ) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material within all leads, lifts and others incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 0.63mm (zero point sixty three millimetre) thick 15cm (fifteen centimetre) wide 45cm (forty five centimetre) over all semicircular plain G.I. sheet gutter with iron brackets 40x3mm (forty x three millimetre) size bolts and nuts and washers etc. including making necessary connection with rain water pipe complete as per design including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing ridges or hips 60cm(sixty centimetre) overall with 0.60 mm(Zero point sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polister organic coting of 20( twenty ) microns over 5 (five) microns primer coating + back coat of polister of 5(five) microns over 5(five ) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm( six millimetre ) dia with prepainted G.I. limpet and bitumen washer complete with all accessories as required as per direction of Engineer- in- charge including carriage of material within all leads, lifts and other incidentals charges .

Providing and fixing valley 90 cm ( ninety centimetre ) overall with 0.60mm ( zero point sixty millimetre ) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5( five ) microns over 5 ( five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm( six millimetre ) dia with screwa prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals charges .

Providing and fixing flushing 38cm ( thirty eight centimetre ) overall with 0.60mm ( zero point sixty millimetre ) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty ) microns over 5(five) microns primer coating + back coat of polyster of 5(five) microns over 5(five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals charges .

Providing wood work in frames of false celling partitions etc. sawn and put-up in position 2nd class Kail wood as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals .

Providing and fixing wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid for separately) 1st class kail wood 20 mm( twenty millimetre ) thick as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals .

Providing and fixing plain square edged cover fillets (beading) 40mm x12mm ( forty millimetre x twelve millimetre ) section with wood screws in ceiling and lining including mitring at junctions 1st class kail wood as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals charges .

Providing and fixing metal tile ceiling for toilet as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals .

Steel work welded in built up sections, trusses and framed work including cutting, hosinting fxing in position and applying a priming coat of red lead paint. In beams joints channels, angles, Tees, flats with connection plates or angle plates as in main and cross beams, hip and jack rafter, purlins connected to comman rafter and the like including carriage of materials with in all leads , lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 1st class indian teak wood. 75 mm x 60mm ( seventy five millimetre x sixty millimetre ) rounded hand rails in straight length complete including carriage of material within all leads, lifts and other incidentalss .

Providing and fixing on wall faces PVC (D-Plast) rain water pipes of working presure not less then 4.5kg ( four point five kilograme ) per square metre including filling the joints with approved adhesive complete PVC 100mm dia ( one hundred millimetre ) including carriage of materials with in all leads, lifts and other incidentals..

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipe including filling the joint with approved adhesive complete plain bend 100mm ( one hundred millimetre) including carriage of materials with in all leads, lifts and other incidentalss.

Providing and fixing PVC clamp 110mm ( one hundred Ten millimetre ) dia metre ISI marked of approved design with steel screws and rawl plugs complete including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Polinhing two coats with french polish on new wood and wood based surface including cleaning the surface of dirt,dust,and sand papered smooth and including a coat of wood filler complete including carriage of materials with in all leads, lifts and other incidentalss.

Applying a birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust,loose materials and other foreign matters sand papered smooth to give final matter fISInh to the surface complete including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Wall painting ( two coat) with Acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for metling the surface complete including carriage of material within all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Distempering(two coat) with oil bound washable distemper of approved brand and manufacture of required shade and undecorated wall surfaces to give an even shade over and including priming coat with alkali resistant primer of approved brand and manufacture after thoroghly brushing the surface free from mortor dropping and other forign matter and also including preparing the surface even and send papered smooth including carriage of materials within all leads , lifts of material and other incidentalss .

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting. Readymixed paint brushing with white lead for priming including carriage of materials within all leads , lifts of material and other incidentalss .

Painting two coats(excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With enamel paint other than white including carriage of materials with in all leads, lifts and other incidentalss.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm ( fifteen x twenty two centimetre ) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement: three Sand) including earth work and laying 10 cm ( ten centimetre ) cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm ( forty millimetre nominal size) and 7.5 cm ( seven point five centimetre ) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm( twenty millimetre ) nominal size) and finished with a floating coat of neat cement complete as per standard design. including carriage of materials with in all leads, lifts and other incidentalss

Providing under layer for plinth protection of 75mm ( seventy five millimetre ) thick (unconsolidated) bed of dry brick/stone aggregated 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground. including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect .

Providing plinth protection 50mm ( fifty millimetre ) thick in cement concrete 1:3:6 (one cement : three sand : six graded/crushed stone aggregates 20 mm( twenty millimetre nominal size) including fISIshing the top surface of concrete smooth including curing complete and carriage of materials with in all leads, lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing glazing with 5.5 mm ( five point five millimetre ) thick toughend glass in door, windows , ventilator shutters & partation etc. With PVC / neoprens gasket etc. Complete as per the architectural drawings and the directions of Engineer in charge .

Providing and fixing 25 x 25mm ( twenty five x twenty five millimetre ) teak wood moulding corner ( beading) including mitring at junctions with wood screws and nails complete with in all leads, lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

WS & S.I. Providing and fixing to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall ceiling and floors including carriage of materials with in all leads, lifts and other incidentals.

20 mm (twenty millimetre) nominal bore.

Providing and fixing Plytheline – AlumISIum - Polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall.1620 (20 mm ( twenty millimetre ) OD pipe) including carriage of materials with in all leads, lifts and other incidentals charges in all respect as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of materials with in all leads, lifts and other incidentals charges in all respect as per direction and Satisfaction of Engineer- in- charge .

Equal Tee 1620

Female branch Tee 1620x 1620x20mm thread

Female elbows 1620x20mm thread.

Male thread connector:- 1620 x 20 mm thread.

Female thread connector:- 1620 x 20 mm thread.

Couplers 1620

Making connection of galvanined mild steel dintribution branch with galvanined mild steel main 20mm to 40mm (twenty millimetre to forty millimetre ) nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 1000 (one thousand liters) net capacity PVC water storage tank of ISI 12701 marked, G.I. Inlet and outlet connection , 15 mm ( fifteen millimetre ) nominal bore ball valve and mosquito proof PVC cover with locking arangement including hoisting up to all heights above ground level including carriage of materials with in all leads, lifts and other incidentals charges complete in all respect as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : one sand) twp piece ( Jaguar make cat no LYS- WHT - 38751) including carriage of materials with in all leads, lifts and other incidentals.

Wall mounted W.C ( Jaguar make cat no LYS- WHT - 38951) with cistern , seat cover ) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and over to be measured and paid for separately) Ordinary closet including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing plastic seat (Solid / Hollow type) cover for wash down water closet with C.P. Brass hinges and rubber buffers, white plastic seat and cover including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings( Jaguar make cat no LYS- WHT -38801) including carriage of materials with in all leads, lifts and other incidentals. including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying vitreous china wash with single hook for pillar tap with C.I or M.S bracket painting white including cutting holes and making good the same ( Jaguar make cat no LYS- WHT - 5701) with cistern , seat cover ) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing Flat back 550 x400mm( five hundred fifty x four hundred millimetre ) vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including jointing with approved adhesive etc. including carriage of materials with in all leads, lifts and other incidentals charges in all respect as per direction and Satisfaction of Engineer- in- charge .

110 mm ( one hundred ten millimetrte ) dia. including carriage of materials with in all leads, lifts and other incidentals.

75 mm ( seventy five milimetre ) dia. including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm ( three millimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete.

110 mm ( one hundred ten millimetrte ) dia. including carriage of materials with in all leads, lifts and other incidentals.

75 mm ( seventy five milimetre ) dia. including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.

110 mm ( one hundred ten millimetrte ) dia. including carriage of materials with in all leads, lifts and other incidentals.

75 mm ( seventy five milimetre ) dia. including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete.

110 mm ( one hundred ten millimetrte ) dia. including carriage of materials with in all leads, lifts and other incidentals .

75 mm ( seventy five milimetre ) dia. including carriage of materials with in all leads, lifts and other incidentals .

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete.

110 mm ( one hundred ten millimetrte ) dia. including carriage of materials with in all leads, lifts and other incidentals

75 mm ( seventy five milimetre ) dia. including carriage of materials with in all leads, lifts and other incidentals .

Providing & fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 75 mm. ( one hundred ten x seventy five millimetre ) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting 610 x 510 mm ( six hundred ten x five hundred ten millimetre ) with bowl depth 200 mm ( two hundred millimetre ) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 32 mm ( thirty two millimetre ) dia C.P. waste of approved specification / make for wash basin or sink complete in all respect including carriage of materials with in all leads, lifts and other incidentals complete as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing 600 x 450 mm ( six hundred x four hundred fifty millimetre ) bevelled edge mirror of superior glass mounted on 6mm ( six millimetre ) thick A.C. Sheet or plywood sheet & fixed to wooden plugs with C.P. Brass screws & washers.including carriage of materials with in all leads, lifts and other incidentals complete as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws 600 x 20mm ( six hundred x twenty millimetre ) including carriage of materials with in all leads, lifts and other incidentals charges complete as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing 600 x 120 mm ( six hundred x one hundred twenty millimetre ) glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws including carriage of materials with in all leads, lifts and other incidentals charges complete as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing wall mixing faucet for shower and bath with overhead pipe (1210cm) and bath shower including carriage of materials with in all leads, lifts and other incidentals charges complete as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing one hole basin mixing Faucet including carriage of materials with in all leads, lifts and other incidentals charges complete as per direction and Satisfaction of Engineer- in- charge .

Providing and fixing 15mm( fifteen millimetre ) mixer for kitchen sink with top / bottom swinging spout. including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm( fifteen millimetre ) C.P bib tap ( long body ) with capstan head & flanges including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm( fifteen millimetre ) C.P. brass angle valve with flanges without Nuts and pipe including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm( fifteen millimetre ) nominal bore brass full way valve with wheel including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 32mm thirty two millimetre ) dia PVC waste pipe including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 300/450mm ( three hundred / four hundred fifty millimetre ) length 15mm ( fifteen millimetre ) nominal boreP.V.C connection with brass unions including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing C.P gratings 100 mm ( one hundred millimetre ) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing C.P. Brass shower rose ( OHS - CHR- 1633 ) with 15mm or 20mm ( fifteen millimetre or twenty millimetre ) inlet including carriage of materials with in all leads, lifts and other incidentals.

Suket Construction Co. Pvt. Ltd.