SITC of compact Substation and accessories work of Multipurpose Hall at Parade Ground Dehradun

Amount

PAR 6.2.1 Supply, Installation, testing and commissioning of (C.S.S) 33 Kv/0.33 Kv or 11 kv/0.433 substation equipment comprising HT panel, transformer, HT cable, bus trunking from transformer to LT panel, LT panel, automatic power factor correction panel, active harmonic filters, TVSS(transient voltage suppression system), SPD, essential panel, earthing required inter-connections substation safety equipments including LT cabling from substation to the building fed by the substation

DSR 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

DSR 7.1.1 Upto 35 sq. mm

DSR 7.1.4 Above 185 sq. mm and upto 400 sq. mm

DSR 9.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

DSR 9.1.31 3½ X 400 sq. mm (82mm)

DSR 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

DSR 5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

DSR 9.4 Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

DSR 9.4.18 3½ X 35 sq. mm

DSR 9.4.28 3½ X 400 sq. mm

DSR 10.5 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :

DSR 10.5.2 120 sq.mm

DSR 5.9 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

DSR 5.8 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Non Schedule Supply, Installatin, testing & commissioning of L.T Panel made of CRCA sheet steel dust and vermin proof with incommer 800 amp with change over switch & outgoing 400 amp FPMCCB 02 nos, & 63 amp FPMCCB 04 nos complete with all respect

Non Schedule Supply ,Installation ,Testing , commissionig and aiming of high wattage LED Floodlight fixture having system wattage of 500W made of aluminium pressure die cast housing to ensure durability in harsh environment and excellant heat dissipation. The Luminaire should have optical cover/lens made of polycarbonate with beam angles ranging from 20° to 60°. The Lumiaire should comply with IK08 mechanical impact protection and IP66 for Ingress protection. The Lumiaire life shall be 50000 burning hours @ L70 criteria. The Luminiare shall deliver 60000 Lumens with a system efficacy of 120Lm/w. The Luminaire shall have CCT of 5700K and CRI not less than 90 i.e TLCI > 90. the Drivers should be BIS certified with efficiency of > 85%, THD< 10% and P.F>0.95. Surge Protection sholud be Upto 20Kv

Non Schedule Supply ,Installation ,Testing , commissionig and aiming of 1x4 Linear surface mounted LED Luminaire having system wattage of 36W made of CRCA Powder coated body. The Luminaire should have optical cover made of HETpolycarbonate.The Lumiaire should have IP20 for Ingress protection. The Lumiaire life shall be 50000 burning hours @ L70 criteria. The Luminiare shall deliver 3600 Lumens with a system efficacy of 100Lm/w. The Luminaire shall have CCT of 5700K and CRI not less than 80. the Drivers should be BIS certified with efficiency of > 85%, THD< 10% and P.F>0.95. Surge Protection sholud be Upto 4Kv

Non Schedule Supply of 3.5 c x 400 sq.mm L.T aluminium armoured cable

Non Schedule Supply of 3.5 c x 35 sq.mm L.T aluminium armoured cable

Non Schedule Supply of 3 c x 120 sq.mm H.T aluminium armoured cable

Non Schedule Fencing for L.T Panel Room

Non Schedule Installation, testing and commissioning of 630 KVA C.S.S & construction of foundation including supply of material, labour, T&P etc complete.

Non Schedule Shifting/ relocating of existing sports lighting from vertically downward to mount on walls as per requirement of badminton including supply/fabrication of mounting fixture arrangement for light.

MITTAL MACHINES PVT LTD (BID ID -353188)