REPAIR TO WOODEN AND STEEL FURNITURE

Amount

Removing old unserviceable parts of chair verandah as under, repalcing the same as per drgs, making functional. FD-256,1108&FD-333. Painting of old chair verandah (steel frame structure) with two coats of synthetic enamel white paint over a coat of chromium red oxide metal primer ,after complete removal of existing paint including preparation of surface, complete all as specified and directed by Engr-in-Charge.

Removal of unserviceable cane and recaning complete seat and back of chair veradah with plastic cane 4mm wide of approved quality in godrej pattern, complete all as specified in drawing and directed by Engr-in-Charge.

Removing old unserviceable parts of chair easy as under, replacing the same as per drgs, making functional. FD-229,1108 & FD-17 Replacement of existing unserviceable front leg made out of sheesham wood to shape duly wroughted , all as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in-Charge .

Replacement of existing unserviceable rear leg made out of sheesham wood made to shape dully wroughted, all as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable side, front and back rails made out of sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked rails carefully, complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable back top stiffner in rear leg made out of sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked stiffners carefully, complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable arms for chair easy made out of sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked arms carefully, complete all as specified and directed by Engr-in-Charge.

Removal of existing unserviceable cane and recaning complete seat and back of chair easy with plastic cane 0.4mm thick 2mm wide woven of approved quality in godrej pattern, complete all as specified in drawing and directed by Engr-in-Charge.

Polishing to chair new or old with French polish after filing the holes cracks with putty and make the surface smooth with emery paper and applying raw/burnt saina the surface to direct vision complete all as specified and directed by Engr-in-Charge.

Removing old unserviceable parts of Chair Dining as under, replacing the same with as per drgs: FD-279 FD-1105 - FD-16. Replacement of existing unserviceable front leg made out of sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable Rear leg made out of sheesham wood made to shape dully wroughted, all as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable Side front and back rails made out of sheesham wood made to shape dulyWroughted all as per drg after taking out old broken/cracked rails carefully, complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable bottom stiffners made out sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked stiffners carefully, complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable back top stiffner in rear leg made out of Sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked stiffners carefully, complete all as specified and directed by Engr-in-Charge.

Removal of unserviceable cane and recaning complete seat of chair dinning with plastic cane 0.4mm thick 2mm wide woven of approved quality in godrej pattern, complete all as specified in drawing and directed by Engr-in-Charge.

Polishing to chair new or old with French polish after filling the holes, cracks with putty and make the surface smooth with emery paper and applying raw/burnt saina the surface to direct vision, complete all as specified and directed by Engr-in-Charge.

Removing old unserviceable parts of Bed Ply wood Top as under, replacing the same as per drgs, making functional. FD-246,FD-1102,FD-247 & FD-21. Replacement of existing unserviceable of Long rail of sheesham wood made to shape as per drawing after taking out old broken long rails complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable Plywood top with new plywood top,12mm top of bed 12mm thick (07 Nos of Ply) BWR commercial type of size 1800x 900mm as top of bed fixed with screws with three stiffeners after taking out the unserviceable ply, complete all as specified and directed by Engr-in-Charge.

Material and labour for polishing the bed new or old exposed to view with French polish and make the surface smooth with emery paper and applying raw/burnt saina the surface to direct vision complete all as specified and directed by Engr-in -Charge.

Removing old unserviceable parts of Charpoy GI pipe as under, replacing the same as per drgs, making functional FD-220 Taking out old worn out and unserviceable nylone newar and providing new plywood 12mm thick 7 Nos of ply BWR Grade ISI marked to IS-303 type BB plywood commercial type of size 1980 x 950mm with and including 8mm dia round head counter shank bolts and nuts and with washer by drilling 3 holes each on long rails and 2 holes each on short rails complete all as specified and directed by Engr-in-Charge. : Make Kitply/Century/Greenply

Taking out old worn out and unserviceable ply wood top and providing new plywood top 12mm thick 7 Nos of ply BWR Grade ISI marked to IS-303 type BB plywood commercial type of size 1980 x 950mm with and including 8mm dia round head counter shank bolts and nut complete all as shown in drawing and as directed. Make Kitply/Century/Greenply

Removing old unserviceable parts of Table dressing as under, replacing the same as per drgs and making functional. Prelaminated particle board 18mm thick to the side of the table.

Board 18mm thick veneered at the bottom of the table.

Plywood commercial 6mm thick to bottom of drawers.

Prelaminated particle board 18mm thick to the top of the table.

Looking mirror 5mm thick of the table with plywood commercial 6mm thick on the back

French polish complete all as specified.

Removing old unserviceable part of Table centre as under replacing the same as per drgs (FD-274 & FD-29) making functional. Replacement of existing unserviceable legS made of sheesham wood made to shape duly wroughted all as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable of new top made of pre-laminated particle board exteriar grade size 900x450x19mm thick (OST) made to shape duly teak wood edging all round the top complete all as specified and directed by Engr-in-Charge.

Material and labour for polishing the table centre with French polish after filling the holes cracked with putty and make the surface smooth with emery paper and applying raw/burnt saina to the directs visions, complete all as specified and directed by Engr-in-Charge.

Removing old unserviceable part of Sofa Set 5 Seater as under replacing the same as per drgs (FD-258 & FD-281) making functional. Replacement of existing unserviceable front legs shell be 200mm high in one piece. The top 50mm portion of legs shall be sqaure in section and below that the legs 45mm dia at top near 150mm from bottom of legs and 25mm dia at the bottom of legs

Replacement of existing unserviceable rear legs shall be 175mm high in one piece. The top 50mm portion of rear legs shall be square in section. The rear legs shall be 45mm dia and 125mm from the bottom of legs and 25mm dia bottom of legs. The legs shall be joined by 25mm x 50mm in section from rear and side rails.

Replacement of existing unserviceable Chirwood fillets 22mmx25mm in section shall be provided al-round the planks. Five numbers copper plated steel springs of 100mm dia and 150mm high shall be provided on each plank using total numbers of springs as 20 in one seat supported by 10mm dia cane stick as shown on drawing and as directed by Engineer - in -charge

Replacement of existing unserviceable Best quality closely knitted Hession cloth shall be fixed over the springs over which 50mm thick layer of coir shall be placed densely in the seat and back of sofa chair. The best quality of hession cloth is again fixed over the coir. A layer of 12mm thck cotton shall be placed at the back and seat of sofa chair. A cotton long cloth shall be provided over the cotton layer. Tapestry cloth shall be provided all as shwon on drawing and as directed by Engineer-in-charge on all sides of sofa chair in such a way that no wood or internal things shall be visible.

Removing old unserviceable part of Table 900 x 600 x 760mm without drawer as under replacing the same as per drgs (FD-283& FD-224) and making functional. Replacement of existing unserviceable leg made of sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked legs carefully complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable of long rails made of sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked short rails, complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable of new top made pre-laminated particle board size 900x600x19mm thick made to shape duly teak edging all round the top as per drg after taking out old broken/ cracked top, complete all as specified and directed by Engr-in-Charge.

Material and labour for polishing the table with French polish after filling the holes cracked with putty and make the surface smooth with emery paper and applying raw/burnt saina to the direct visions, complete all as specified and directed by Engr-in-Charge.

Removing old unserviceable part of Teapoy wooden as under replacing the same as per drgs (FD-278) and making functional. Replacement of existing unserviceable of leg made of sheesham wood made to shape duly wroughted all as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable of teapoy top made of pre-laminated particle board exterior grade size 600x450x19mm thick (OST) made to shape duly teak wood edging all round the top as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in-Charge.

Material and labour for polishing the table with French polish after filling the holes cracked with putty and make the surface smooth with emery paper and applying raw/burnt saina to the directs visions, complete all as specified and directed by Engr-in-Charge.

Removing old unserviceable part of Table Peg as under replacing the same as per drgs and making functional. Replacement of existing unserviceable of leg made of sheesham wood made to shape duly wroughted all as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in-Charge..

Replacement of existing unserviceable of new top made of pre-laminated particle board exteriar grade size 450x300x19mm thick made to shape duly teak wood edging all round the top as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in-Charge.

Material and labour for polishing the table with French polish after filling the holes cracked with putty and make the surface smooth with emery paper and applying raw/burnt saina to the directs visions, complete all as specified and directed by Engr-in-Charge.

Removing old unserviceable parts of table office clerk steel as under, replacing the same as per drgs and making functional. Removing of dents and bends and smoothening the defective place and repairs to drawers as to slide easily in and out of the table including lock of drawers, complete all as specified and directed by Engr-in-Charge.

Replacement of unserviceable top with new top made out of size 1200 x 600 x 19mm thick pre-laminated particle board exterior grade one side teak faced duly beading all round the top, complete all as specified and directed by Engr-in-Charge.

Removing old unserviceable part of Table writing as under replacing the same as per drgs and making functional. Replacement of existing unserviceable of leg made of sheesham wood made to shape duly wroughted all as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable of both rails made of sheesham wood made to shape duly wroughted all as per drg after taking out old broken/cracked rails carefully, complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable of new top made of pre-laminated particle board one side teak face size 1200x600x19mm thick made to shape duly teak wood edging all round the top as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in-Charge.

Material and labour for polishing the table with French polish after filling the holes cracked with putty and make the surface smooth with emery paper and applying raw/burnt saina to the directs visions, complete all as specified and directed by Engr-in-Charge.

Removing old unserviceable part of Table 900 x 606 x 760mm without drawer as under replacing the same as per drgs and making functional. Replacement of existing unserviceable leg made of sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked legs carefully complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable of both Short rails made of sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked short rails, complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable long rails made of sheesham wood made to shape duly wroughted all as per drg after taking out old broken/cracked long rails, complete all as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable of new top made pre-laminated particle board size 900x600x19mm thick (OST) made to shape duly teak edging all round the top as per drg after taking out old broken/ cracked top, complete all as specified and directed by Engr-in-Charge.

jatindera enterprises

vivek and co