Upgradation of 2 School for School of Excellence at various Location in SABARKANTHA district.

Demolition and disposal of unserviceable materials with all lead

and lift. (i) unreinforced concrete.

Demolition of Brick work and stone masnoary including stacking of

2 sericeable materials and disposal of unsericeable materials with all 588.97 562.84 Cmt.

lead and lift. (ii) in cement mortar

Dismentalling tiled or stone floors laid in mortar including stacking

3 of serviceable materials and disposal of unserviceable materials 387.07 49.18 Smt

with all lead and lift.

Removing and scraping of old deteriorated plaster of any thickness

from wall/RCC member including staking of serviceable material

and disposal of unserviceable materials from site work with all lead

Dismantling steel work including distempering and stacking the

materials with all lead and lift.

Excavation for foundation upto 1.5 m depth including sorting

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil

Filling with the available excavated earth (excluding rock) in

trenches, plinth, sides of foundation etc. in layers not exceeding

20cm in depth consolidating each deposited layer by ramming and

9 of 20 cm. thickness inculding watering, ramming and consolidation 392.66 294.38 Cmt.

etc. complete.

Filling in plinth with sand under floors including watering

ramming, consolidating and dressing complete

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundationand

plinth in Cement Mortar 1:6. (1‐ Cement : 6 ‐finesand)(C) Fly Ash

Brick work using common burnt clay building conventional bricks

having crushing strength not less than 35 Kg/Sq. cm. in foundation

and plinth in cement mortar 1:4 (1 Cement :4 fine sand) (C) Fly

Ash Bricks(For Earth Quack Zone )

Masonry work with aerated light weight concrete Blocks of size

60cm x 23cm x 23cm or any other approved size, having crushing

strength @ 35 kg/sqcm Fixing with ready-mixed mortar

('Fixoblock'of M/s Ultratech cement Ltd./Rapid Fix/Lion) having

tensile adhision strength >0.8 N/mm2 and compressive strength of

>2N/mm2.The mortar is to be fixed in a thickness of 3mm to 5mm

on the clean and leveled surface of blockmasonry using proper

trowel. For all floor and lead and lift For superstructure.

Brick work using common burnt clay building bricks having

crushing strength not less than 35Kg./Sq.Cm. for superstructure in

cement mortar 1:6(1 cement :6 fine sand) including curing etc.

complete. (C) Fly Ash Bricks For all heights and all floor

Half brick in common brunt clay building bricks having crushing

strength not less than 35 Kg/sq.cm in cement mortar 1:4 (1 cement :

4 coarse sand) (C) Fly Ash Bricks in super structure including

curing etc. complete.For all floors

White stone Bela mesonary block work in partion wall upto 15cm

thickness in cement mortar 1:4 (1 cement : 4 coarse sand) in super

structure including curing etc. complete.For all floors(For Earth

Quack zone)

Providing & laying Cement Concrete 1:4:8 (1 Cement :4 Coarse

sand :8 hand brocken stone aggregates of 40mm nominal size) in

plinth and curing complete including cost of formwork. (A)

Foundation and Plinth - At plinth level

Providing and laying cement concrete 1:5:10 (1- Cement : 5-

Coarse sand : 10- hand broken stone aggregates 40 mm nominal

size) and curing complete including cost of formwork in (A)

Foundation and Plinth

Providing & laying Cement Concrete 1:2:4 (1 Cement : 2 Coarse

Sand : 4 graded stone aggregate 20 mm nominal size) & curing

complete including cost of form work (A) Foundation and Plinth -

Below Tie beam, Plinth protection & surface leveling work.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-

coarse sand : 4-graded stone aggregate 20mm nominal size) laid in

one layer and finished with a floating coat of neat cement. (A)

40mm thick.

Providing and laying controlled cement concrete M.150 for

curing complete including cost of formwork and excluding cost

21 of reinforcement for reinforced concrete work in (A) 31.73 4218.24 Cmt.

Foundations, footings,Base of columns and Mass

concrete (Cement Level 290 Kg)

Description Of Item Quantity Rate Unit Amount

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Coping Vertical

and horizontal for all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and Excluding the cost of

23 reinforcement for reinforced concrete work in (A) Foundations, 74.72 4437.81 Cmt.

footings, Base of columns and Mass concrete.(Cement Level

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and Excluding the cost of

reinforcement for reinforced concrete work in Plinth Beams.

(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Lintels all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Chajja all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Beams all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Columns, Pillars

posts and struts all floor (Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Columns, Pillars

posts and struts all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Slab all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (E) Staircases

including lending all floor (Cement Level 360 Kg)

Providing I.S.I. T.M.T Bars Fe.500D steel reinfocement (ISI mark)

32 Confirmed to IS-1786 for R.C.C.work including Cutting, bending, 35460.61 77.29 Kg.

binding and placing in position etc. complete.For all floors

Providing 10mm thick cement plaster in single coat on on

brick/concrete walls & Ceilling & Soffit of stair interior plastering

in cement mortar 1:4(1 cement 4 sand) watering, curing etc.

complete.For all floors

Providing 15mm thick cement plaster in single coat on rough or fair

side of single or half brick wall for interior plastering in cement

mortar 1:4(1 cement 4 sand) watering, curing etc. complete.For all

20mm thick sand faced cement plaster on walls above ground level

consisting of 12mm thick backing coat of cement mortar 1:3(1

cement 3 sand) and 8mm thick finishing coat of cement mortar

1:1(1 cement 1 sand) watering, curing etc.complete for any Height.

Finishing walls with 100% Premium acrylic emulsion paint having

VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,

Alkali & fungal resistance, dirt resistance exterior paint of required

shade (Company Depot Tinted) with silicon additives. New work

(Two or more coats applied @ 1.43 litre/ 10sqm. Over and

including priming coat of exterior primer applied @ 0.90 litre/10

sqm, Item Includes two coat of primar and putty with scafolding at

all level of work. As per Approval of Engineer Incharge.

Distempeing (Two coats) with oil bound washable distemper

having VOC content les than 50 grm/liter of approved brand and

manufacture and of required shade on wall surfaces to give an even

shade, over and including a priming coat and putty with alkali

resistance primer of approved brand after thoroughly brushing the

surface and other foreign matter and also including preparing the

surface even and sand parpered smooth As per Approval of

Engineer Incharge

White washing with lime on wall surface ( three coats) over and

including a primary coat of white washing to give an even shade

after thoroughly brooming the surface to remove all dirt, dust,

mortar drops and other foreign matter

Description Of Item Quantity Rate Unit Amount

Painting two coats (Including priming coat)having Low VOC

content on new wood and wood based surface with enamel

39 paint,Primar coat, interior to give an even shade including cleaning 33.37 134.98 Smt

the surface of all dirt, dust,oil,grease and other foreign matter sand

papering,knotting and stopping.(As directed by Engineer in charge)

Painting two coates (Including Priming coat)having Low VOC

content over new steel and other metal surfaces with enamel

paint,primar coat, brushing, interior to give an even shade including

40 cleaning the surface of all dirt,oil, grease,dirt, dust and other foreign 1044.40 95.30 Smt

matter with fine steel wood, scrapers and sand paper with ready

mixed priming paint brushing red lead etc. complete.(As directed

by Engineer in charge)

Providing and laying 25mm thick polished Kota stone

flooring/staircase treads (two pieces with three groves in front of

41 steps) over 20mm (average) thcik base of cement mortar 1:6 (1 909.55 1019.00 Smt

cement 6 coarse sand) laid over and jointed with grey cement

slurry including curing, rubbing, and polishing etc. complete.

Providing & fixing average 25mm thick Double polished Kota

stones for shelves in cup board, seating plat form, including curing,

rubbing, polishing etc. complete. (As directed by Engineer in

Providing and laying 18 mm thick mirror polished black granite

stone machine cut in single piece (Max. available) in sill and jambs

laid over 10 mm thick cemen mortar 1 : 3 (1 cement : 3 coarse

43 sand) and jointed with grey cement slurry with matching pigment 54.90 2061.11 Smt

incl. rubbing and polishing half rounding edge both side etc.

complete colour and shed as approved by architect engineer in

charge. (As directed by Engineer in charge)

providing & laying cement water proofing of average 60mm thick

for terrace for all floors using first layer cement mortar (1:3) over an

exsisting surface second layer of arranging brick bats acording to

slop adding suitable chemical to make water tieght & again third

layer of cement mortar 1:3 on above including adding water

proffing compound and finishing top with net cement slury using

cement @ 2.75 kg/sq mt. making any patterns and design on the top

etc. complete as directed.(As directed by Engineer in charge)

Providing & Laying Broken China Mosaic flooring for plain &

curve surface 12mm to 20mm of broken piece of ceramic tiles or

Glazed tiles ( one or more colour as directed by Engg. In charge ) to

be laid over cement mortar bedding of CM 1:3 to plain or and

45 slopes and to be tempered to bring mortar cream up to and colour 566.56 779.70 Smt

pigment including rounding of junctions and extending them pu to

15cms along the wall and curing with bends any patterns of designs

as per deawing or directions including cleaning with water and

oxilic acid using 1 kg / 1 bag of water proofing materials.

Providing cement vata (10 cm X 10 cm size) quartar round in

cement mortar 1:1 including neat cement finishing, watering etc.

complete Respectely plaster acitivity shall be commenced only after

completion of vata work.

Providing & fixing in position mild steel door with ventilation

frame 40x40x6 mm and shutter frame 35x35x5mm ,75x5 mm ms

flate at lock rail,10 mm square bar in vent at10 cm c/c coverd with

47 corrugated ms sheet 0.6 mm thick, including applying a priming 60.26 3717.92 Smt

coat of read lead paint including cleanicn the surface of all dirt,

dust and other foreign matter (As directed by Engineer in charge&

approved drawing and design etc.)

Providing & fixing in position mild steel window with ventilation

frame 35x35x5 mm and shutter frame 25x25x5mm ,10 mm square

bar grill at10 cm c/c coverd with corrugated ms sheet 0.6 mm

thick,including applying a priming coat of read lead paint including

cleanicn the surface of all dirt, dust and other foreign matter (As

directed by Engineer in charge& approved drawing and design etc.)

Providing and fixing window having extruded aluminum Colour

Powder Coated section frame main outer size 63.50 x 38.10 x

mm(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal

two track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal

Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size

61.85 mm x 31.75mm x 1.30 mm (of Jindal Section no:8758 @

wt.of 0.0.659 Kg/mt) with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of

Jindal Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt.

0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

complete for window.

Description Of Item Quantity Rate Unit Amount

Steel work, M.S Grill, welded in built up sections framed work

including cutting, hoisting, fixing in position and applying a

priming coat of read lead paint. (A)In beams and joists, channels

angles Tees, flats, with connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters, purlins conneted to common

rafters and the like

Providing & fixing G.I rain water Spout of 65mm dia and 60cm

Painting of logo on front side wall as directed by Engineer in

charge and as per approved drawing.

Providing and laying white glazed tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement.

Providing and laying white glazed tiles 6mm thick in skirting, riser

54 of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3 49.30 982.03 Smt

coarse sand) and jointed with white cement slurry.

Providing and fixing Chicken mesh jali (22 gauge) 15cm wide at

the junction of 2 different surfaces of different material component

at the time of plastering to prevent cracking in plaster surface as

and where directed at all floors with all leads and lifts etc.complete.

Providing & Fixing Green board(2400mm x 1200mm) with soft

56 board(1200mm x 1200mm) on wall as per the drawing & design 11.00 10352.50 NO

etc. complete.

Providing upto floor two level precast cement concrete jali or grill

1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone aggregate

57 6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire 1.44 842.30 Smt

including roughening,cleaning, fixing and finishing in cement

mortar 1:3 and curing complete.(E) 100mm thick

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 : 2006 including

mm Sand layer for levelling and filling the joint with sand in proper

line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Re-fixing of existing paver Blocks:

Fixing of existing pre-cast Rubber Dye inter locking concrete block

as per approved design including 35mm Sand layer for levelling

and filling the joint with sand in proper line and level etc complete.

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30 cm length, 30cm height and 15cm thick of

60 M250 grade concrete as per aprooved design and including 180.00 374.92 Rmt

excavation for fixing in proper line and level, filling the joint with

C:M 1:3 (1 Cement : 3 Fine sand) etc. complete (uptp 10 ton).

Providing and fixing of highly durable precoated Roofing Sheets

having high quality color coating throughout the roof and having

minimum 0.6 mm thickness .The Color Coated sheet Roofing

fixed with galvanized iron /color powder coated J or L Hooks,

Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer

or color powder coated limpet washer. filled with white lead

complete as per approved sample and color as directed by engineer

Provoding and supplying small dust bin (Green,Blue,Red,Black

62 yellow,) 7 Litres as directed by Engineer in charge, Approve Make- 11.00 290.38 NO

Cello, Aristo, Nayasa

Provoding and supplying big dust bin (Green,Blue,Red,Yellow)

63 Litres as directed by Engineer in charge Approve Make- Cello, 6.00 464.60 NO

Aristo, Nayasa

Provoding and supplying big dust bin ( Green,Blue,Red) 50 Litres

64 as directed by Engineer in charge Approve Make- Cello, Aristo, 6.00 580.75 NO

Providing and Fixing 5mm thick Acrylic Name Plate for dark zink

glare with braille lippi and fixing with double sided bonding tap

and screws as per direction of Engineer in charge of Size having

12'. X 4 ' etc. compl.

Providing and Fixing 5mm thick Acrylic Name Plate for dark zink

glare with braille lippi and fixing with double sided bonding tap

and screws as per direction of Engineer in charge of Size having

12" X 18" etc. compl.

Providing and laying tactile tile (for vision impaired persons as per

standards) of size 300x300x15 mm having with water absorption

less than 0.5% and conforming to IS:15622 of approved make in all

colours and shades in for outdoor floors such as footpath, court

67 yard, multi modals location etc., laid on 20mm thick base of cement 90.35 1850.03 Smt

mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns

including grouting the joints with white cement mixed with

matching pigments etc. complete as per direction of Engineer-in-

Description Of Item Quantity Rate Unit Amount

Providing and fixing School of Excellence Logo Size ( 900mm x

900mm ),Aluminium Composite Panels (ACP) 3mm

thickness,Coloe Code - PS 33 Blue,High Glossy 3mm Orange

68 Acrylic Embossing Logo,Back Side Aluminium Section Framing ( 2.00 8208.61 NO

50mm x 25mm x 1mm )25mm is Side Of Frame and SS Hardware

Finish on front side of ACR wall as directed by Engineer in charge

and as per approved drawing.

Providing and fixing Red Agra stone takti 0f size 600*600*12 to

15 mm having with approved SOE LOGO Letter and in ivory

colour with water based sealent coating finishing on wall in cement

69 mortar 1:3 (1 cement : 3 coarse sand) in all shapes & patterns 2.00 3175.96 NO

including grouting the joints with white cement mixed with

matching pigments etc. complete as per direction of Engineer-in-

Painting two coats (including priming coat) on new steel and other

metal surface with synthetic enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other

foreign matter.

Construction of a soak well of as per the approved drawing &

design etc.in all sort of soil complete as directed and approved by

71 15.18 5939.91 Per Cmt

engineer incharge.( The internal In-to-in dimension shall be

considered for calculation)

Construction of a septic tank as per the approved drawing & design

etc.in all sort of soil complete as directed and approved by engineer

72 4.50 5491.40 Per Cmt

incharge. ( The internal In-to-in dimension shall be considered for

calculation)

Providing and fixing washbasin with single hole for pillar tap with

M.S. brackets painted white including sutting holes and making

73 good the same but excluding fittings.(A) Vitreous China:(ii) Flat 2.00 1984.79 NO

Back washbasin 550 mm x v 400mm size. (i) In white colour

including CP Brass west , MI Fisher union and Pillat tap

Providing & fixing Stainless steel 316 Grab Bar 40mm dia.75Cm

long rail.as directed and approved by engineer incharge.

Construction of ICN Chamber as peras directed and approved by

engineer incharge.

Providing and fixing screw down bib taps of following size.(B)

Brass chromium plated screws down Bib Tap. (i) 15mm dia.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt.

of cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

Providing and fixing wash down water closet (European

type W.C pan) with integral P or S trap including jointing

the trap with soil pipe in cement mortar 1:1 (1 cement : 1 fine sand)

(seat cover,Jet spray & Flush Tank to be measured Including) (A)

Vitreous China (I) Long pattern white as directed and approved by

engineer incharge.

Providing erecting and fixing double coated ISI water tank of

79 required capacity each with all necessary fittings and connection 2600.00 3.95 liter

etc. complete on terrace

80 Providing & fixing UPVC ball valve(A) 25mm dia. 4.00 650.84 NO

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water tight C.I. cover

81 with frame of 300mm x 300mm size (inside) with standard 6.00 1246.92 NO

weight.(i) Square mouth traps.(B) 150mm x 100mm size P

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 75 mm diameter with jali of the following

82 nominal diameter of self cleansing design with C.I scread 12.00 574.06 NO

down or hinged grating including the cost of cutting and

making good the walls.

83 Providing & fixing 110mm dia PVC cowl vent to pipes. 2.00 19.70 NO

Providing laying and jointing in true line and level

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

Description Of Item Quantity Rate Unit Amount

Providing laying and jointing in true line and level

25mm dia.U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level

15mm dia.U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

pressure PVC pipes of the following out side dia. Special density

complete with special flange compression type fitting,wall clips etc.

including making good the wall ceiling and floor.(G) 160 mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

pressure PVC pipes of the following out side dia. Special density

complete with special flange compression type fitting,wall clips etc.

including making good the wall ceiling and floor.(G) 110 mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

PVC pipes of the following out side dia. Special density complete

with special flange compression type fitting,wall clips etc.

including making good the wall ceiling and floor.(F) 75 mm dia

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non- pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends prepared for

collar joints including testing of joints complete.(F) 500 mm

91 Providing compose pit as per design and drawing. 2.00 23920.81 Each

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

skrting risers of steps and dedo on 10mm thick cement plaster 1:3

(1-cement : 3-coarse sand) and jointed with white cement slurry

complete for antiskit

Providing laying and boring recharge well with the outer dimention

of 2.46 X 2.46 Mt along with the Slit chamber having outer

dimension of 1.46 X 1.46 Mt. The Slit chamber shall be as per the

approved drawing with PCC & Masonary work. The recharge well

shall be drilled up to 30Mt in all sorts of strata along with minimum

93 12 mt Strainer pipe of suitabel size, graval / aggregate packing, 2.00 71879.59 No

PCC, BBCC , Midium size gravel, Course sand, nyloin mesh, and

neccesarry tools tackels and quipment for sucessfully functioning.

The item shall be as per the IS 15797:2008 , approved drawing and

Approved by Engineer incharge.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

94 accessories and earth continuity of following type, erected on PVC 63.00 350.47 Pt.

/ Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose

/ H.D.Connector as directed.(e) in existing pipe erected flushed on

wall/ceiling complete,Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and accessories

95 with earth continuity of following type erected on PVC / 49.00 489.85 Pt.

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(e) in existing pipe erected flushed on

wall/ceiling complete,Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected

96 on PVC / Metallic/Wooden box covered with appropriate front 18.00 364.61 Pt.

plate modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.[I] For 6A Plug and 6 a switch with 2-

1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board(e) in

existing pipe erected flushed on wall/ceiling complete,Cat. III

Description Of Item Quantity Rate Unit Amount

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected

97 on PVC / Metallic/Wooden box covered with appropriate front 13.00 499.95 Pt.

plate modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.[II] For 16A Plug and 16 amp switch

with 2-2.5 sq.mm Cu. Wire from mcb db board.(e) in existing pipe

erected flushed on wall/ceiling complete,Cat. III

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

98 single mounting base frame covered with textured / metallic/white 39.00 241.39 Pt.

front plate modules erected on / in wall / ceiling with following

type accessoriesCat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires erected in

below type of pipe with 6A Modular type switches and following

99 type of accessories erected on PVC / Metallic/Wooden box, single 10.00 449.45 Pt.

mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling rose or H.D.Connector as

directed.(e) in existing pipe erected flushed on wall/ceiling

complete Cat-III

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules erected

with necessary connections as per site situation directed by

Engineer In charge.(10) 6/16Amp. Universal socket

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules erected

with necessary connections as per site situation directed by

Engineer In charge.(7) Blank Plate Single,Cat.III

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules erected

with necessary connections as per site situation directed by

Engineer In charge.(8) Computer RJ-45 socket ,Cat.III

Providing and erecting ISI mark embossed Medium class RIGID

PVC PIPES (F.R.L.S.)of following size complete to be erected

on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed (a) 20 mm

Providing and erecting ISI mark embossed Medium class RIGID

PVC PIPES (F.R.L.S.) of following size complete to be erected

on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed (b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with

105 required nos. of coupling, PVC bushes, Check-nuts etc. complete of 139.40 20.20 Mtr.

following sizes.(2) 25 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size,(E) in

existing pipe,(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size,(E) in

existing pipe,(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size,(E) in existing pipe,(a)

2 wire 4 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size,(E) in existing pipe,(b)

2 wire 6 sq. mm

Description Of Item Quantity Rate Unit Amount

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size,(E) in existing pipe,(g)

4 wire 4 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

111 existing pipe of following size (Specifically for control panel, 10.00 35.35 Mtr.

relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.(d) One wire

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

112 existing pipe of following size (Specifically for control panel, 10.00 87.87 Mtr.

relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.(f) One wire

Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kv grade ISI marked copper wires of following size to be

erected as directed.(e) 1.50 Sq.mm 3 core round PVC sheathed

Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kv grade ISI marked copper wires of following size to be

erected as directed.(c) 1.00 Sq.mm 2 core round/ flat PVC sheathed

Supplying & erecting approved make LAN cable of following size

in existing pipe as per direction,[C] CAT -

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

116 mounting base frame covered with textured/metallic /white front 33.00 1081.71 No.

plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug ,For Modular Type Accessories ,Cat. III

Decorative call bell Ting-tong box type 250 volts complete erected

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/ aluminium die cast powder coated and high U.V.

& corrosion resistance with diffuser with company mark/name

160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

118 Luminaire efficacy> 85 lumens/watt ,LED 50.00 295.93 No.

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.),(A) Tube Light with integral driver,(ii)

20 Watts, Surge - 2KV,IP-20, conventional 4 feet,Cat-lll

Supplying and erecting led lamps with following wattage capacity

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser, mounting suitable for

119 E14 / E27 / B22 lamp holders, pf >= 0.5(A) LED Lamps integral 10.00 112.11 No.

type, with PC diffuser suitable LAMP holder,(ii) 8 watts ,Cat-III

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

120 than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio 5.00 4997.48 No.

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

any wattage capacity between the ranges shown.)(A) Street Light

(IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.,(ii) 48 to

Watts,Cat-lll

providing and erecting Miniature circuit breaker single pole 0.5A to

2A system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark

Description Of Item Quantity Rate Unit Amount

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark , Cat.III

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity (A) 6 to 32 Amp.

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity ,(A)

6 to 32 Amp. Cat.III

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

125 IEC 61439-1 & 3 without MCB to house appropriate nos. of 1.00 2913.85 No.

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI) (b) sheet

steel double door,(ii)6 way

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

126 IEC 61439-1 & 3 without MCB to house appropriate nos. of 1.00 885.77 No.

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for (A) single phase incoming and horizontal single

phase outgoing (b) sheet steel double door,(ii)6 way (IP-43)

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

127 IEC 61439-1 & 3 without MCB to house appropriate nos. of 4.00 1492.78 No.

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for (A) single phase incoming and horizontal single

phase outgoing (b) sheet steel double door,(ii)12 way (IP-43)

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

128 V,50Hz. having characteristic of quick action & tripping with all 3.00 1969.50 No.

advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed (i) 25 Amps.DP Cat-III

Providing & erecting Medium Voltage Danger Notice Board sticker

129 as per language suggested by engineer incharge of standard size as 7.00 26.26 No.

per IS-2551

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant

130 ohmic value surrounded by highly conductive compound with high 1.00 4591.46 No.

charge dissipation suitable for following type of applications with

chamber and heavy duty cover.(approved make OEM has to submit

test certificate including value of earth resistane of installation.(a)

For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive compound with high

131 charge dissipation suitable for following type of applications with 2.00 5760.03 No.

chamber and heavy duty cover.(approved make OEM has to submit

test certificate including value of earth resistane of installation.[b]

For Electrical installation up to 11 KV located in other than

normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg

Providing and erecting Annealed bare Copper wire 8 to 16 SWG.

Providing and erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary 8 SWG earth

For using salt and charcoal / coke as required for pipe type earthing

Description Of Item Quantity Rate Unit Amount

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following

size of cables.(B) 4 core 6 Sq. mm

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

136 connecting accessories of same material at required depth in 60.00 62.62 Mtr

existing trench for laying of cable. below ground / road surface

for enclosing cable (A)50 mm outer dia

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

137 connecting accessories of same material at required depth in 40.00 95.95 Mtr

existing trench for laying of cable. below ground / road surface

for enclosing cable (C)90 mm outer dia

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

138 connected to switchgear terminals with brass/cadmium plated nut 7.00 8.08 No.

bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with Condenser

139 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with 34.00 1948.29 No.

aluminium blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in charge))

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and pierced

through a 16 Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan

hook or Fan box.

Supplying & erecting single phase approved make industrial

exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size and

maximum speed in RPM,[A] 305 mm dia 900 RPM,Cat.II

Supply of approved make FRP Pole having following

specifications: FRP Light Pole made by CNC filament winding

machine using thermoset resin polyester/epoxy resin system)

having minimum 62% glass content. The pole should be in one

piece and tapered round in shape, having smooth finish and should

be totally free from corrosion as well as non conductive & shock

proof Pole should be provided with FRP Anchor Base and it

should be heavy duty, or MS Material duly painted with Epoxy

paint. Pole should be flame retardant as per IS 6746. Resin used

shall be UV resistance and pigmented. A highly weather resistant

polyurethane coating shall be applied to the pole after applying

suitable primer system that ensures proper adhesion of the paint.

Minimum coating thickness shall be 80 to 100 micron. Deflection

of the pole shall not exceed more than 10% of the length of pole for

the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability

features of poles as per standard ANSI C 136.20 latest version or

ASTM D 4923/01 including cable termination box with necessary

accessories . The size of pole and type of installation with

foundation as per manufacturer details and site requirement are as

below .(3) Suitable for direct grouting & Single arm Bracket. [D]

Overall length of 5 Mtr. Average Thickness: 7mm.

Top/ Bottom OD Dia: 90/145 mm ± 3mm approx. approx. Weight

of Pole 25 kg approx.

Providing Aluminium arm bracket of having 2 sets of suitable

144 SS304 hardware for fixing the brackets & spread of 1.2 Mtr 5.00 2234.12 No.

(Suitable for 89 to 114 mm pole top dia) (A) Single arm bracket

Providing Aluminium arm bracket of having 2 sets of suitable

SS304 hardware for fixing the brackets & spread of 1.2 Mtr

(Suitable for 89 to 114 mm pole top dia) (B) Double arm bracket

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box complete

with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting

146 mob & hinged doors as per requirement having locking 5.00 515.10 No.

arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth bolt of

following size of box. (B) 250mm x 200mm x 100mm [deep]

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 45 x 45 x 100 cm.

Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm

dia x 45 cm) high upper ground level with necessary curing and

finishing in approved manner.

( for 4 & 6 mtr pole)

Description Of Item Quantity Rate Unit Amount

Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

148 LED Meter :5 LED Arrays 1.00 11298.87 Ea

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery)

with automatic changeover from AC to Battery operation, duly

protected by wrong Battery Polarity connections. [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer

Supplying & erecting recess wall mounting speaker with 5W rated

input power 3.3 K. Ohms / 3W impedance, 100 - 10000 Hz

frequency response with 6 inch dia. cone type 8 ohms speakers duly

fitted in ABS plastic cabinet of colour match with wall or ceiling of

following size. (b)Square shaped 260 x 260mm size speaker

Supplying, installing and testing approved make microphone for All

purpose, with frequency response of 100 - 11000 Hz, having

sensitivity 2.2mv / Pa & impedance 500 Ohms (LO- Z) supplied

with quick detachable holder, 6 mtr twin core cable & 3 pin XLR

connector. [[Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

Providing and erecting water cooler having storage capacity 80Ltr.

& cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by 15˚ C within a hour,

151 The water cooler should be comprising of hermetically sealed 1.00 41342.33 No.

compressor, fan motor, condensing unit, water tank surrounded by

evaporating coil, thermostats, relay etc. complete with necessary

inlet & outlet connection. The body of water cooler will be made

from Stainless Steel. ◦

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon filter

152 suitable buster DC pump capacity 80 psi, mention with 40 psi 1.00 13053.24 No.

inline type post carbon filter auto low & high pressure switches

with following size of storage tank & LPH capacity & erected as

directed ,[B] 25 Ltr / Hr with 30 Ltr. Storage Tank

SUPLYING, INSTALING, TESTING AND COMMISSIONING

OF Of your

premises of pipes and as per spec G.I. Pipe fittings such as Bends,

Tees, reducers, rubber insertions asnd galvanised nuts and bolts

includding Flow Directions Marketing, One coat of Primer, one

coat of Signal Red color 100 MM

SUPLYING, INSTALING, TESTING AND COMMISSIONING

OF Of your

premises of pipes and as per spec G.I. Pipe fittings such as Bends,

Tees, reducers, rubber insertions asnd galvanised nuts and bolts

includding Flow Directions Marketing, One coat of Primer, one

coat of Signal Red color 80 MM

Providing & Fixing Of SS, Fire Hydrant Single Headed Valve Isi

Mark, With 80 Mm N.B. Flanged Inlet, Ss 316 Orifice Plate, Ss

Spindle Controlled 63 Mm Dia Female Instantaneous Outlet Type.

155 Ss Coupling, Blank Cap, Chain, Twist Release Type Lug & All 4.00 7109.08 Nos.

Accessories Conforming To Is:5290 Including Fixing With Anchor

Fastner And Flanged Tapping From Wet Riser, Complete As

Description Of Item Quantity Rate Unit Amount

Providing and fixing 63mm Parole fire hose of approved grand

conforming to IS 636 type B having crushing pressure of

156 kg/cm 2 of ISI marked of 15 mtr length fitting with necessary S.S 4.00 8886.34 Nos.

63mm delivery hose coupling as IS 903 with ISI mark bided with

GI wire etc complete directed.

Providing & Fixing Of Of 63 Mm Dia Instantaneous Pattern Short

Branch Pipe, Made From Ss , Isi Mark, 20 Mm Dia Nozzle

Conforming To Is 903, Suitable For Inter Connection To Hose Pipe

Coupling Complete As Required.

Providing & Fixing Of Swinging Type Isi Mark, First Aid Hose

Reel In Red Colour Drum With 30 Mtrs Long 25 Mm Dia Heavy

Duty Rubber Water Hose, 25 Mm Dia Globe Valve Stop Cock,

158 Terminating With Ss Coupling & Nozzle Of 8Mm Outlet With Shut 4.00 7701.50 Nos.

Off Valve Confirming To Is 8090 - 1976 Complete With Ms Socket

For Tap-Off, Drum And Brackets (Including Painting) For Fixing

On Wall With Anchor Fastner, Bolts & Nuts Conforming To Is:884-

1969 Complete As Required.

Providing & Fixing Of Lockable Cabinet, Made Out Of Ms Sheet

Of 20 Gauge Thickness Having Central Opening And 4 Mm Thick

Glazed Glass Doors (Twonos.) To Accommodate 1 Nos Of Hose

159 Pipe (15Mtr) And 1 No. Gm / Ss Branch Pipe Etc Suitably Marked 4.00 2843.63 Nos.

On The Outside With The Letters "Fire Hose" Including Necessary

Locking Arrangement And Shall Be Painted With One Coat Of

Primer And Two Coats Of Synthetic Enamel Paint Of Approved

Providing & Fixing Of Hand Lever Operated Butterfly Valve (100

Mm Dia) With Ci Body And Ss Disc With Epdm Linning With All

Required Accessories Like Flange, Teflon Gaskate, Gi Nut Bolts

Providing & Fixing Of Hand Lever Operated Butterfly Valve (80

Mm Dia) With Ci Body And Ss Disc With Epdm Linning With All

Required Accessories Like Flange, Teflon Gaskate, Gi Nut Bolts

Sitc Of Ci Non-Return Valves (100 Mm Dia) As Per Is:5312 (Part

162 1) 1984, Wafer Type With Required Flange, Nuts, Bolts And 1.00 3585.50 Nos.

Gaskets Etc Complete.

Providing & Fixing Of 2 Way Valve Isi Marked All Required

Fitting Accessories.3

Providing & Fixing Of 450 Lpm Fire Pump With Panel Isi Marked

164 All Required Fitting Accessories. . (One Year One Time Motor 1.00 62115.00 HP

Winding Warranty)(M.R.) 7.5 Hp

Sitc Of Gm 25Mm Dia Air Vent Valves With 25 Mm Dia. Ball

Valve, Nipple And Other Required Accessories.

Providing & Fixing Of Fire Proof 3.5C X 50 Sq Mm Cable As

Required Isi Marked All Required Fitting Accessories.

Providing ABC Type Fire Extinguisher 6 Kg Isi Marked All

Required Fitting Accessories.(M.R.)

Providing Co2 Type Fire Extinguisher 4.5 Kg Isi Marked All

Required Fitting Accessories.(M.R.)

Providing & Fixing Of Manual Call Point Isi Marked All Required

Fitting Accessories.(Boq)

Suplying, Instaling, Testing And Commissioning Of Fire

Hooter(M.R.)

171 Providing & Fixing Of Presure Meter Switch Isi Marked.(Boq) 1.00 6516.65 Nos.

Providing & fixing PVC water tanks as required on GROUND

level including making platform for bottom support and making

172 2000.00 4.71 Liters

necessary inlet, outlet and overflow connection etc.

complete.(BOQ)

Construction of an On ground masonry water tank as per the

173 approved drawing & design etc. complete as per engineer 10000.00 6.94 Liters

incharge.(BOQ)

Providing and fixing to wall, ceiling & floor U.P.V.C (SCH

40) of the following Outside dia. Tube fitting and clamps, and

testing including making good wall and floor etc. (c) 75mm Dia.

Providing & fixing UPVC check or non-return fullway

valve(A)75mm dia.

176 Providing & eraction Core Cutting up to 200mm 4.00 858.50 Nos.

Supply & installation of Conventational , Fire Alaem Control Panel

Make Agni or similar

Total Rs. :

I/We am/are willing to carry out the work at………………….% above/below percent

(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct……………………… % below Deduct……………………… % Above

In words In words