Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.2 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹49.3 L+₹3.9 L (8.50%)Rejected-Finance HOUSE NO 29 A SIJUBARI NIZARA PATH PO PS HATTIGAON GUWAHATI 38 | KAMRUP METRO | ASSAM | 781038 | L2 | Rejected-Finance Unsuccessful bidder | |
| 3 | L3₹51.9 L+₹6.5 L (14.2%)Rejected-Finance 2ND FLOOR SC ROAD SANTA PLAZA TEZPUR DISTT SONITPUR ASSAM PIN 784001 | SONITPUR | ASSAM | 784001 | L3 | Rejected-Finance Unsuccessful bidder | |
| 4 | L4₹55.4 L+₹9.9 L (21.7%)Rejected-Finance GATANGA MISSION CHARALI TEZPUR 784154 ASSAM | SONITPUR | ASSAM | 784154 | L4 | Rejected-Finance Unsuccessful bidder | |
| 5 | L5₹55.9 L+₹10.5 L (23.0%)Rejected-Finance MAHABHAIRAB PO TEZPUR DISTT SONITPUR ASSAM PIN 784 001 | SONITPUR | ASSAM | 784001 | L5 | Rejected-Finance Unsuccessful bidder |
| Sl No | Description | Qty | Unit | M/S MOHANPASARI L4 | M/s Dhani Enterprise L8 | M/S S.K. Sharma L7 | MISHRA SUPPLY AGENCY L9 | M/S SEWAK SINGH L2 | M/S ROHAN BARUA L1 | DILIP KUMAR SINGH L6 | D G Corporation L5 | AVASANA SOLUTIONS PRIVATE LIMITED L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) complete and removing rubbish off the premises complete all as specified and directed. | 875 | Sqm | 20 ₹17,500 | 95 ₹83,125 | 20 ₹17,500 | 40 ₹35,000 | 20 ₹17,500 | 10 ₹8,750 Lowest | 100 ₹87,500 | 20 ₹17,500 | 20 ₹17,500 |
| 2.00 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc | 20 | Sqm | 20 ₹400 Lowest | 65 ₹1,300 | 20 ₹400 Lowest | 40 ₹800 | 20 ₹400 Lowest | 25 ₹500 | 40 ₹800 | 20 ₹400 Lowest | 20 ₹400 Lowest |
| 3.00 | M&L Glazed vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) of any shade, polished, area of each tiles exceeding 0.42 but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6. | 475 | SQM | 1,450 ₹6,88,750 | 1,850 ₹8,78,750 | 2,200 ₹10,45,000 | 1,750 ₹8,31,250 | 1,450 ₹6,88,750 | 1,300 ₹6,17,500 | 1,200 ₹5,70,000 Lowest | 1,600 ₹7,60,000 | 1,500 ₹7,12,500 |
| 4.00 | M&L Glazed vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) of any shade, polished, area of each tiles exceeding 0.42 but not exceeding 1.00 sqm, in skirting over 10mm thick rendering in cement mortar 1:4 | 40 | Sqm | 1,600 ₹64,000 | 1,880 ₹75,200 | 2,200 ₹88,000 | 1,750 ₹70,000 | 1,500 ₹60,000 | 1,250 ₹50,000 | 1,200 ₹48,000 Lowest | 1,650 ₹66,000 | 1,500 ₹60,000 |
| 5.00 | Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters. | 820 | Sqm | 20 ₹16,400 | 30 ₹24,600 | 10 ₹8,200 Lowest | 20 ₹16,400 | 10 ₹8,200 Lowest | 10 ₹8,200 Lowest | 45 ₹36,900 | 35 ₹28,700 | 20 ₹16,400 |
| 6.00 | S&F 6-10 mm thick PVC hollow panels (any colour/Pattern/ Louver type as selected) with to 0.5 mm plain PVC sheet suitably placed in Wall inclding same and matching colour wall angle , u clip, end elip and jointer . As in ceiling and walls including aluminium frame work fixed to wall or wooden scantling vertically and horizontally at an interval of 600 mm c/c) as directed by Engr-in-Charge all as specified and directed | 270 | Sqm | 1,000 ₹2,70,000 Lowest | 1,500 ₹4,05,000 | 1,400 ₹3,78,000 | 1,900 ₹5,13,000 | 1,450 ₹3,91,500 | 1,050 ₹2,83,500 | 1,150 ₹3,10,500 | 1,500 ₹4,05,000 | 1,000 ₹2,70,000 Lowest |
| 7.00 | M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions all as specified and directed | 340 | Sqm | 550 ₹1,87,000 | 685 ₹2,32,900 | 500 ₹1,70,000 | 450 ₹1,53,000 | 800 ₹2,72,000 | 800 ₹2,72,000 | 450 ₹1,53,000 | 450 ₹1,53,000 | 290 ₹98,600 Lowest |
| 8.00 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. | 340 | Sqm | 300 ₹1,02,000 Lowest | 750 ₹2,55,000 | 650 ₹2,21,000 | 550 ₹1,87,000 | 800 ₹2,72,000 | 750 ₹2,55,000 | 500 ₹1,70,000 | 500 ₹1,70,000 | 550 ₹1,87,000 |
| 9.00 | Demolition of brickwork or stone/boulder masonry, built in cement mortar all as directed. | 8 | Cum | 200 ₹1,600 Lowest | 850 ₹6,800 | 200 ₹1,600 Lowest | 600 ₹4,800 | 200 ₹1,600 Lowest | 650 ₹5,200 | 600 ₹4,800 | 500 ₹4,000 | 400 ₹3,200 |
| 10.00 | M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed. | 5.5 | Cum | 8,500 ₹46,750 | 8,500 ₹46,750 | 8,200 ₹45,100 | 7,500 ₹41,250 | 9,000 ₹49,500 | 7,500 ₹41,250 | 6,000 ₹33,000 Lowest | 9,000 ₹49,500 | 7,000 ₹38,500 |
Tender Value
₹60.4 L
EMD Value
₹1.2 L
Closing Date
21 Oct 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Tezpur
HQ CWE TEZPUR PO DEKARGAON DIST SONITPUR PIN 784501 (ASSAM)
SPL REPAIR OF BLDG NO P-47 AND P-04 AT CERTAIN LOCATION OF SAA UNDER GE (S) TEZPUR
2025_MES_731831_1
CWE/TEZ(S)/T-60 of 25-26
Open Tender
Civil Works
Item Rate
90 days
GE (S) Tezpur
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE (S) Tezpur
₹1.2 L
Yes
2 Dec 2025
19 Sept 2025
23 Oct 2025
19 Sept 2025
21 Oct 2025
14 Oct 2025
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) complete and removing rubbish off the premises complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc
M&L Glazed vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) of any shade, polished, area of each tiles exceeding 0.42 but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.
M&L Glazed vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) of any shade, polished, area of each tiles exceeding 0.42 but not exceeding 1.00 sqm, in skirting over 10mm thick rendering in cement mortar 1:4
Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters.
M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions all as specified and directed
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.
Demolition of brickwork or stone/boulder masonry, built in cement mortar all as directed.
M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.
Ditto as per item No 11 except bricks all as sepcified and directed
Material and labour for old size sub Class B bricks bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.
Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.
M&L 10mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement
M&L Applying two coats of acrylic distemper to newly plastered/previously untreated wall over a coat of 3 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.
M&L rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC @ 3% by weight of cement and finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC will be measured and paid for separately)
M&L for preparation of newly plaster surface and applying two coats of weather coat over 1 mm thick putty to make surface smooth and one coat of primer damp sheild over newely plastered wall complete all as specefied and directed.
Supply only water proofing compound. Conforming to IS -2645.
Taking down chowkats or frames exc 1.5 sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.
Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) n exc. 1.50 Sqm complete all as specified and as directed.
S & F In repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specififed and directed
M&L for Old wall surface including properly preparation/removal of existing paint surface and fillings the cracks with exterior wall care putty and pigment and applying one coat of weather coat water proofing paints as in boundry wall, single , double and triple storey bldg, complete all as specified andas directed by Engineer-in-Charge.
M&L Applying one coat of acrylic distemper to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed
M&L for PCC 1:3:6 type C2 (40 mm graded aggregate) in foundations, filling and mass concrete on top surface to receive topping layer/as levelling course including necessary formwork all as specified and as directed.
M&L Applying two coats of acrylic distemper to old plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed..
M&L for complete removal of existing treatment and applying two coats of weather coat over a coat of polymer (exterior grade) putty to make surface smooth and one coat of primer damp sheild over old plastered wall complete all as specefied and directed.
S&F Solid PVC moulded door frame of size 50mm x 45 mm made out of 5mm prelaminated PVC sheet reinforced with M.S. tube, all as specified and directed
S& F Factory made PVC solid moulded Door Shutter, 30 mm thick with board core (styles), with 2,4 or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site all as specified and directed.
S& F 100 mm stainless steel Butt hinges with with SS Screw
S & f stainless steel handles fancy/ decorative type 100 mm size complete all as specified and directed.
S&F stainless steel, barrel tower bolt decorative type 150mm long complete all as specified and directed.
Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly all as specified and directed
M & L 15mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm including taking down plaster etc
Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm applied over a coat of hot blown bitumen of grade 85/25 @1.2 Kg/Sqm, The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane including removal and refixing of PVC tank any capavity on same place with all required necessary fittings complete all as specified and as directed.
Dismantling and breaking up PVC drain pipes of any dia jointed in CM and taking out of trenches.
S & F, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor all as specified and directed.
M&L for cutting grooves in brick wall 75mmwide & 65mm deep for tucking in edges of felt & shapping horizontal face of groove with cement mortar 1:3
Material and Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels,plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specifed and as directed.
Demolition of reinforced cement concrete of any description and in any position
M&L Reinforced cement concrete M 25 Design Mix (20mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span
Use & waste form work for flat finished sides and soffits of floor or roof beams, lintels, lintal bands cantilevers, shelves etc., complete.
M&L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete.
M&L mild steel bars 10 mm dia and over cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire complete.
M&L 12mm thick clear toughened glass inluding fixing stainless steel brackets, cleats and fixing accessories for frame less toughened glass fixing in fixed opening and for doors eaching of any pattern/ design/ shape, heavy duty floor machine, decorative SS/Brass handles and locking assembly as per manufacture's instructions and approval of garrison engineer.
S & F solid PVC Wall Lining of any colour/shade consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing
S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron, Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S & F powder coated aluminium door shutters (Thickness or powder coating not less than 50 micron)., aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
S& F 5.0 mm thick sheet glass ordinary/tinted/ Filmed to match exixting quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares.
S&F Exterior coloured ceramic tiles 450 x 300 mm x 7 to 8 mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm rendering in Cement mortar 1:4 complete all as specified and directed. .
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including cutting chases of exsisting wall for wall taking out concealed conduit ec. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-below complete all as specified and as directed.
Taking down main switches and DBs of any type and make including wooden board / junction box.
M&L for concealed point wiring for one Light/ Fan/ Bell point complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20 mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, with and including modular metal flush box and Modular white Cover Plate with Frame for fixing modular switches, sockets fan regulators etc duly earthed. Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles complete all as specified and as directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price.
All as per item No. 56 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and as directed.
All as per item No. 56 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and as directed.
All as per item No. 56 here - in - before but for 5 Amps socket point on the same board controlled by one switch.
S&F modular switch flush type, 6 Amp, one way ,1 module all as directed specified.
S&F modular socket outlet, 3 pin, 6 Amp, flush type 2 module all as directed/ specified.
S&F modular switch, 16 Amp flush type 1 module all as directed/ specified.
S&F modular socket outlet, 3 pin, 6/16 Amp flush type 2 module all as directed/ specified.
S&F modular Fan Regulator stepped type 2 module ,120W all as directed/ specified.
S&F ceiling rose surface backelite three terminals.
Supply and fix LED tube light fitting of 18 W (4 Ft) 240 V Wall mounted LED batten aluminium houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection.
S&F 10 Watt LED fitting Recessd/Surface mounted high power COB LED wall washers, best illumination on the wall and retail displays with independent electronic LED driver ensuring glare free light with all its surface module accessories including taking down unsv light fittings comlpete all as specified and directed.
S & F in repair 18 Watt LED fitting Recess mounted downlighter (Round/Square) with independent electronic LED driver ensuring glare free light with all its surface module accessories including taking down old unserviceable type downlighter including taking down unsv light fittings comlpete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, not more than 50Watt, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including provision of fan hook all as directed
Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Tripple pole and neutral (TPN) 415 Volt , double door, suitable for 4 way with dim rail earth and neutral bar all as specified and as directed.
S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 12 way with common bus bar at incomming end complete all as specified and directed
S & F MCB 'C' series Triple pole and nutral 100 Amps, breaking capacity 10KA complete all as specified and directed
S & F MCB 'C' series Single pole and nutral 40-63 Amps, breaking capacity 10KA,complete all as specified and directed
S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed
S&F motor starter for 32 Amps 2 modules including modular MS flush box and cover plate 2 module complete all as directed.
M&L in repair for sub main wiring with Four run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and two run of copper earth wire 4 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.
M&L in repair for sub main wiring with Four run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and two run of copper earth wire 4.0 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.
M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I
Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm, 3.5 core compltet all as specified and directed. Note: 1. Excavation and earth work will be measured and paid seperately.
Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and all as directed.
M&L for 80 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.
Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment.
Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable complete all as specified and directed.
Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick all as specified and directed by Engr-in-Charge.
Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified.
Supply & install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality of 1.5 Ton 5 Star capacity all as sepcified and directed.
Supply and fix voltage stabilizer for automatic operation , single phase naturally air cooled indoor type & designed for input variation between 140 V to 280 V with out put voltage stabilized at 230 volt with accuracy of ( +-) 2.5 % and of capacity 5 KVA all as specified and as directed.
Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten polycarbonate houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and incl connection.
All as item no 88 above but LED batten 9 watt 2 ft long
Supply and fix for Recess/Surface mounting high lumen output LED light fittings for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 12 watt LED CDL light, all as specified and as directed.
S&F motor starter for 32 Amps 2 modules including modular MS flush box and cover plate 2 module complete all as directed.
S&F in modular bell push, flush type, 5 Amp,1 module all as directed/ specified.
S & F in replacement Modular Blank plate, 1 module complete all as specified and directed
S & F in replacement Modular type White cover plate with frame 2 module complete all as specified and directed
S & F in replacement Modular type White cover plate with frame 4 module complete all as specified and directed
S & F in replacement Modular type White cover plate with frame 6 module complete all as specified and directed
S & F in replacement Modular type White cover plate with frame 8 module complete all as specified and directed
S & F in replacement Modular type Metal Flush box 2 module complete all as specified and directed
S & F in replacement Modular type Metal Flush box 4 module complete all as specified and directed
S & F in replacement Modular type Metal Flush box 6 module complete all as specified and directed
S & F in replacement Modular type Metal Flush box 8 module complete all as specified and directed
S & F in replacement MS Box in concealed of any type and any size complete all as specified and directed.
NOTES: 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule "A" notes for details.
M/S SEWAK SINGH (BID ID -3456021)
AVASANA SOLUTIONS PRIVATE LIMITED (BID ID -3452391)
M/S MOHANPASARI (BID ID -3455636)
D G Corporation (BID ID -3455367)
DILIP KUMAR SINGH (BID ID -3453104)
M/S S.K. Sharma (BID ID -3461648)
M/s Dhani Enterprise (BID ID -3459654)
MISHRA SUPPLY AGENCY (BID ID -3456627)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.45 MB
T60tenderdocus.pdf
Tender Documents • 1.64 MB
BOQ_819350.xls
BOQ • 0.76 MB
corrigendum1.pdf
PDF • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .