Lowering, Installation, Testing & Commissioning of Borewell Submersible Pump Sets and Allied Electrical Works for Borewells in Junagadh District.

Name Lowering, Installation, Testing & Commissioning of Borewell Submersible Pump Sets and

of Allied Electrical Works for Borewells in Junagadh District.

Sr.No. Item Description Qty Unit Rate Amount

1 Lowering/Lifting of a 3-phase submersible 10 Job 2,300.00

pump set with HDPE pipe and cable into the

borewell, including all necessary fittings and

accessories, by means of a mechanised derrick,

chain pulley or suitable fixtures, and jointing

the cable with the fuse unit/control panel

board, including satisfactory testing, for depths

above 150 to 300 metres.

2 Lowering/Lifting of a 3-phase submersible 10 Job 2,000.00

pump set with HDPE pipe and cable into the

borewell, including all necessary fittings and

accessories, by means of a mechanised derrick,

chain pulley or suitable fixtures, and jointing

the cable with the fuse unit/control panel

board, including satisfactory testing, for depths

from upto 150 metres.

3 Providing a light commercial (medium) four- 20 Day 1,800.00

wheeler diesel vehicle on rental basis for one

day (minimum 12 hours), including driver and

POL, complete, for the first 100 km per day.

4 Providing a light commercial (medium) four- 600 Km 12.00

wheeler diesel vehicle on rental basis for one

day (minimum 12 hours), including driver and

POL, complete, with extra kilometres beyond

100 km per day.

5 Providing and fixing clamps made of MS plate, 20 Set 687.07

having three holes on either side, complete

with nuts and bolts of standard make and

suitable size, for pipes above 50 mm to

6 Supply, Delivery, Lowering and Laying of MS 600 Kg 96.00

Specials conforming to relevant IS standards,

including all taxes, duties, insurance,

transportation, freight, octroi, inspection,

loading, unloading, conveyance to site,

stacking, etc., complete.

7 Providing and casting in-situ cement concrete 4 Cum 4,732.00

of Grade M-15 using granite, quartzite or trap

metal of size 6 mm to 20 mm for construction

of a cement concrete platform measuring

m × 0.50 m × 0.60 m, with 0.30 m height above

ground level and 0.30 m depth below ground

level, around the borewell casing complete as

directed by the Engineer-in-Charge.

8 Supplying & erecting earth pit of minimum 20 Lot 4,215.00

bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by

highly conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty

cover. For Electrical Installation up to 440V in

normal soil Length of pipe - 1 Mtr, Back filling

compound - 1 Nos Bag of 15 Kg.

9 Providing and erecting required size HOT deep 800 Kg 77.00

galvanized iron strip for earthing of LT

components using proper clamps.

10 Providing and erecting approved make RCCBs 20 Job 3,010.00

conforming to IS: 12640 and having a

sensitivity of 30 mA and short-circuit withstand

capacity of 10 kA, suitable for operation on 3-

phase and neutral, 415 V, 50 Hz supply, having

quick-action tripping characteristics with all

advanced features and not incorporating any

electronic components, for the following

maximum ratings, erected as directed.

11 Making Trench in Soft Soil of Suitable width for 800 RMT 55.00

laying cable and back filling the same and

making the surface as normal Ground. (LT

12 Providing dust and vermin proof MS cabin 20 Each 23,406.00

having two compartments, one for panel board

and other for energy meter and fuse unit with

required locking arrangement , minimum

degree of protection IP 52 as per IS

fabricated from CRCA sheer steel minimum

thickness for base frame / channel / gland

plates for 3 mm for load bearing members,1.6

mm for ineternal members including cutting,

bending, drilling, welding, riveting with

ineternal partitions.The sheet steel enclosure

shall be powder coated as per applicable

standard with shade as required with finish

thickness of paint film not less than

microns.The cabin shall have following

dimension. Also, Provide locking system for the

13 Providing Unskilled labour on Daily Wage for 20 Job 513.50

Work of Loading/Unloading of pumping

machinery related material in vehicle from

departmental store.

14 Hiring of Hydra with Driver for 20 Job 3,334.49

Loading/Unloading of HDPE Pipe Coils into

I/We am/are willing to carry out the work at ................% above / below percentage (In

word ................... Percentage above / below) of the estimated rates mentioned above.

Amount of my/our tender works out as under..........

Note: Rates are Exclusive of GST

Offer for Above Offer for Below

1. Estimate cost Rs: 9,71,649.20 1. Estimate cost Rs:

2. Above:____ % Above Rs: _________ 2. Below:____ % below Rs:_________

3. Net amount Rs:_______________ 3 .NET amount Rs:_______________

Signature of Contractor. Executive Engineer

P.H. Mech. Division