PROVN OF 02 x SHEDS OF 25 MT FOR STORAGE OF CASED SUPPLIES IN ARMY AREA OF AGE B/R (I) UNDER GE (A) CENTRAL JODHPUR

Amount

Excavating in trenches not exceeding 1.50M wide and not exceeding 1.50M depth for foundation etc. or for shafts, wells less pits, manhole not exceeding 10 Sqm on plain and not exceeding 1.50M in depth and getting out in soft loose soil complete all as specified and directed.

M&L for squared rubble walling, Jodhpur type, brought up to coursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm and dressing of face beds and joints for squared rubble walling regular coursed Jodhpur type complete all as specified and as directed.

M&L for 10mm thick plastering in CM 1:4 on fair face of stone or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for keyed pointing in CM 1:3 to squared rubble regular coursed or uncoursed Jodhpur type masonry complete all as specified and as directed.

M&L for 15mm thick plastering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished fair and even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered wall surface and applying three coats of white wash complete all as specified and directed..

M&L for PCC 1:4:8, type D2, using 40mm graded stone aggregate as in sub base and mass concrete complete all as specified and directed

Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated materials not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L for 55mm thick Cement Concrete 1:2:4, type B1, using 20mm graded stone aggregate, finished rough to receive flooring stone slabs complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab over and including 15mm thick screed base in CM 1:4 including rubbing and polishing complete all as specified and directed

Excavating in post holes each not exceeding 0.5cum, getting out in soft loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed

M&L for cement concrete in foundations, filling and mass concrete 1:3:6, type C2 using 40mm graded stone aggregate as in filling post hole complete all as specified and directed.

M&L for preparation of newly plastered/ pointed wall surfaces and applying two coats of cement based paint over and including one coat of chalk white complete all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete all as specified and directed

M&L for RCC 1:1.5:3, Type A1, (nominal mix) using 20mm graded stone aggregate as in beam, roof beam, cantilevers, lintel beam, etc. complete all as specified and directed

S&F Mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam, slab etc. hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

S&F Mild steel TMT bar 5 dia and over up to and including 10 mm dia as in stirrups, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc. hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St- 240 complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etc. confirming to Fe 410-W (Gde E-250) Quality A, complete all as specified and directed

S&F Plates (plain or chequered) channels square cut or notched (ordinary and counter sunk), forming holes with riveted bolted or welding attachment complete all as specified and directed

S&F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples, fixed to wood or steel members complete all as specified and directed

M&L for preparing new steel surfaces of any description exceeding 10cm in width and applying two coat of synthetic enamel paint over and including one coat of red oxide paint complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified and directed.

S&F Mild steel framed work such as grills, gratings, etc..with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed.

S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer with cooler opening complete all as specified and directed. complete all as specified and as directed.

S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer with cooler opening complete all as specified and directed.

M&L for preparation of pre primed steel surfaces of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

S&F Mild steel framed work as in grills, guard bars and welded to steel window frames complete all as specified and as directed.

S&F 3 mm thick pinheaded sheet glass panes of size not exceeding 0.5sqm each fixed with oil putty complete all as specified and directed.

S&F Galvanised mild steel wire cloth of 0.40mm nominal dia of wire and 1.20 mm average width of aperture fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L 50mm thick PCC 1:3:6, Type C1, using 20mm graded stone aggregate as in plinth protection finished smooth without using extra cement including forming joints in 2 mtr intervals and filled with bitumen mastics complete all as specified and directed.

SURESH TRADERS

M/S SHARMA ASSOCIATES

M/S KAUTILYA GARG

RISING ELECTRICALS