Internal Electrification work in residential and non-residential buildings (NDRF 15th Battalin) of Sugar Mill Gadarpur

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.Group A

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.5/6 amps switch

Same item 5 but s/f 3 pin 5/6 amp socket outlet

S/F of light plug point.S/F of metal box of 150mmx75mmx60mm deep (nominal size) on surface or in recess with suitable size of phinolic laminated sheet,complete in all respect.

Wiring for circuit/submain wiring alongwith earth wire with 2x1.5sq.mm+1x1.5sq.mm of FRLS PVC insulated copper conductor,single core cable in surface/recessed medium class PVC conduit as required.

Wiring for circuit/submain wiring alongwith earth wire with 2x2.5sq.mm+1x2.5sq.mm of FRLS PVC insulated copper conductor,single core cable in surface/recessed medium class PVC conduit as required.

Same as above but for 2x4sq.mm+1x4sq.mm earth wire.

Same as above but for 2x6 sq.mm+1x6 sq.mm earth wire.

Same as above but for 4x10 sq.mm+2x6 sq.mm earth wire.

S/D of 1x1.5sq.mm FRLS PVC insulated copper conductor single core cable in existing surface/recess PVC conduit.Complete in all respect.

S/F of power plug point.S/F of metal box of 180mmx100mmx60mm deep (nominal size) on surface or in recess with suitable size of phinolic laminated sheet,complete in all respect.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

S/F of PVC batten/angle holder including connection etc.as required .

S/F of 3 pin,5 amp.ceiling rose on the existing jonction box,including connection etc.as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator 8 way , Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator 12 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40AMP

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 AMP

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8way (4 + 24), Double doorr

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 4 X 25 sq. mm (28mm)

Suppling , installing on wall testing and commissioning of 200 amps (S.C.rating for 1 sec-15KA) capacity rising mains,wall straps fully PVC insulated TPN aluminium bus bars in convenient section and suitable for 415 Volts,3 phase 4 wire,50 Hz.A.C.supply with extension joint.Complete in all respect.(DSR.No.3.1.1) Havells/HPL/C&S/Standard make.

S/F of electronic fan regulator 120-280 V.ISI marked on the existing switch board ,complete in all respect.

S&F of 100 Amp. 4 Pole. Isolator CAT A

S&F of 200 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.

S&F of 400 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead Make: As approved in U.P. P.W.D., & C.P.R.I. Certifie

S/F of LED tube light fitting with batten for 1x22 watt.LED tube light ,complete in all respect. Catt.AA

Making hole in the wall for exhaust fan and finishing properly complete in all respect.

Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect CAT AA

S/F of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 52 to 72 watt,complete in all respect. Catt.AAA

Supply & erection of "D" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint .

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect. CAT-AAA

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volt 10 sqmm 2core

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over acushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.70sq. mm 3-1/2 core

S/F of pole mounting weather proof box sintax make with digital tiomer switch,contactor,D.P. MCB,complete in all respect.(S.R.)

S/L of L.T Arial Bunched cable 25sq.mm.2 core with messanger ,Complete in all respect.(S.R.)

S/F of ceiling fan with 1200 mm sweep without regulator ,complete in all respect.

S/F of cable connector complete in all respect.(S.R.)

S/F of exhaust fan metallic 230 mm of reputed make,complete in all respect.

S/F of 15 watt LED,complete in all respect.

S/F of PVC insulated solid aluminium conductor (flat twin) sheathed cable 6sqmm

S/F of PVC insulated solid aluminium conductor (flat twin) sheathed cable 10sqmm

S/F of heavy duty exhaust fan(18'') of rputed make ( bajaj / usa /cromption)etc

S/F of wall mounting fan high speed

JOSHI ELECTRIC WORKS