OUTSOURCING OF SERVICES FOR MANNING AND OPERATION OF FIRE FIGHTING INSTALLATION AND CENTRAL HEATING INSTALLATIONS IN TECHNICAL AREA AT AF STN LEH

Amount

Outsourcing of services for manning and operation of Fire Fighting installation and Central Heating installations for Adm Bldg and M-17 Hanger at 114 HU with all connected equiptments and machineries by providing 03 (three) skilled operators (one skilled operator in each shift of 08 hours each in a day i.e. round the clock) including Satuarday / Sunday/ holiday and also ensuring the smooth running of equiptments and machineries including upkeeping the installation and general routine mainteance complete all as specified and comprising of equiptments and machineries as per details given below :- (a) Fire Fighting Installation at 114 HU (i) Electric driven centrifugal pump set of 37 KW/50 HP capacity - 01 No.(Main pump) (ii) Diesel Engine driven pump set of 37 KW capacity - 01 No.(Standby pump) (iii) Electric driven centrifugal pump set of 11 KW/15 HP capacity - 01 No. (Jockey pump) (iv) LT panels and connected control switch gears. (b) Central Heating Plant at for M-17 Hanger at 114 HU (i) Thermic fluid heater capacity 4,00,000 K cal/hr (160000 BTU/Hr) type M-400 srl No 1/04-05 & srl No 002/04-05) temp range 300 degree C. Make-Helza Boiler (India)Pvt Ltd Kolkata with control panel complete with all logic circuit as per diagram incuding 08 Nos DOL starter, 02 No sequence controller switch, differential pressure switch, fuel gas lamp controller, burner with solenoid valve with pump and blower motor etc. (ii) Thermic fluid circulating pump of make-Johnson pump India (Ltd) type Col-V 150-200 R IS 423 Q rated 30 Max 60 Cum/Hr rated 45 Max 46 M P rated 6.5 max 8.5 KW efficiency rated 50.5% speed 2410 RPM with squirrel cage induction motor of make Bharat Bijlee 3 Phase, 415 V type MA-135253, 50 degree Amp Temp 7.5 KW / 10 HP In class F. Duty SI P.F 0.8869 Kg from 2920 efficiently 85% 02 Nos. (iii) Two Nos. thermic fluid tank one No for condensing of thermic fluid and one for storage to over flow of condensed oil. (iv) Air handling unit for annexe building of cap 6000 CFM with squirrel cage induction motor of make-Bharat Bijlee 415 Volt 3 Phase 7.5 Amp frame size 112 M 3.7 KW/5HP RPM 1430 with motorized 3 way valve with temperature controller and Humidity controller complete with logic control and power circuit complete.

Item 1.00 Contd...... (v) Air handling unit for Hanger No 1 and Hanger No 2 of cap 13000 CPM with squirrel cage induction motor of make Bharat Bijlee 410 Volt 3 Phase 50 Hz 14.5.0 Amp Frame size 132 M 7.5 KW/10HP. Duty SI, MA 13 MU 70. Efficiency 87% RPM 1440 insulation class F with temp controller and Humidity controller with 3 way by pass valve and humidifier motor complete of Make Tullu 50, head 9 mtr, driver 50 watt, 230 volt AC ins class E of make-UP National Mfrs Ltd Varanasi, India. (c) Central Heating Plant for Adm Bldg at 114 HU (i) Thermic fluid heater capacity 200000 K Cal/hr. Model No TPCm-02. Make Thermopac with control panel with all logic circuit, sequence controller switch, differential pressure switch, fuel gauge burner with relined value including pump, blower motor etc – 02 Nos (ii) Thermic fluid circulating pump with squirrel cage induction motor – 02 Nos (iii) Two Nos Thermic fluid tank, one for circulating of thermic fluid and one for storage to overflow of condensed oil. (iv) Fan coil unit of capacity 1.5/2.0 TR Make-universal, with single phase motor inlet/outlet valves, air gauge valve, thermostatic control with all connected accessories with temperature controller complete with logic pauses circuit complete – 38 Nos

Item 1.00 Contd...... NOTE : (i) Contractor shall make arrangement of 0.5 HP motor and PVC pipe for filling overhead diesel tank and cost of the same shall be deemed to be included in quoted rate. (ii)Fuel like Diesel and lubricants shall be issued under Sch'B' free for filling. (iii) The Operator deployed by the contractor must be of proper trade 10+2 pass having minimum 02 (Two) years experience/a person having 07 years experience in the relevant trade/Ex-serviceman of the relevant trade. (iv) The personnel employed by the contractor must have Aadhar number and Bank account. The contractor shall pay salary not less than minimum wages fixed by State Govt. / Central Govt./LAHDC( whichever is higher), directly into the Bank Account of the personnel employed. The payment to the contractor will be made only after submission of proof of payment of wages through Aadhar linked Bank account by contractor / firm in the worker’s account. (v) Also refer note No. 17 of Sch Á'Notes on srl Page No 15 here-in-before (vi) Complete tool kit shall be provided by the contractor to each operator for general maintenance of the equipments and the machinery installed in the installation.

Hitech Erectors Pvt. Ltd.

neelam construction co