Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹5.0 Cr
EMD Value
₹9.9 L
Closing Date
19 Oct 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ENGINEERIN
14 conditions · 3 needing a document upload
"The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of ""total contractual payments"" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB (as per standard tender document), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (As per Rly. Board letter No. 2022/CE-I/CT/GCC- 2022/Policy dated 14.07.2022, advanced correction slip No. 1)."
Tenders costing more than 50.00 Lakhs:- As a proof of experience/competency, The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Similar Nature of Work :- Any structural work made of Pre-cast PSC/RCC panels.
16 conditions · 5 needing a document upload
Tenderers are required to upload self-attested/digitally signed scanned copy of eligibility documents such as mandatory credentials, affidavit, partnership deed, power of attorney, PAN, GST/TIN Firm/Company registration/MOA/MOU/AOA etc.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. (Annexure-VII-A).
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i) A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii) The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids. (i.e. excluding the last date of submission of bids. (iii) Non submission of scanned copy of Bank Guarantee with the bid on e- tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv) The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v) The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected (vi) The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. (vii) The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii) If the envelope is not sealed and marked as instructed above, the Authority assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder. (Annexure-VII-A, as per attached standard tender documents & Annexure-VI-A of GCC-2022).
Tenderers are advised to submit self-attested/digitally signed copy of Bank particulars i.e. Bank name, Bank Account No. IFSC code as per Annexure-XII of Tender Document for any smooth transactions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are not required to submit uploaded Tender document which has uploaded for the information & knowledge of Tenderers. (2) Tenderers are advised to check the Tender Schedule Items, conditions/eligibility criteria etc. before quoting the rates for E-Tendering. (3) No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suo-moto post tender letters of the tenders shall be treated as NULL & Void. (Authority: - HQ/NR Letter No. 74-W/0/Pt. XXV/WA/Loose Dated: 07.04.2015.
Tenderers are advised to make workers wage/salary payment through workers bank account to ensure making payment during the wage period in Railway's Shramik Kalyan portal.
All latest and up to date Correction slips of General Conditions of Contract (GCC)-April-2022 and Standard Tender Document (STD)-2022 Shall be applicable.
Provision of Relay Hut for Gate Signallig at Non Interlocked L-xing gates over Ambala Division (TVU between 10000 and 20000) (For 32 nos. L-xing, BTI-SGNR LC No. 18, 21, 23, 25, 26, 28, 36, 44, 54, 60, 64, 79, 97,99 and RPJ-BTI 30, 37, 46, 47, 57, 66, 73, 74, 77, 79, 82, 99, 109, 111, 112, 121, 125, 127).
OT-180-UMB-2026-27~NR
OT-180-UMB-2026-27
Open
Works - General
12 Months
Ambala, Haryana
₹0
₹9.9 L
25 Sept 2026
25 Sept 2026
5 Oct 2026
33 items across 1 schedule · ₹5,21,55,943.1 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 320 | 205.45 | 65,744 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 480 | 253.95 | 1,21,896 |
| 3 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 480 | 368.65 | 1,76,952 |
| 4 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 576 | 6,326.05 | 36,43,804.8 |
| 5 | Concrete of M25 grade with minimum cement content of 300 kg /cum | cum | 16 | 8,599.5 | 1,37,592 |
| 6 | Hard drawn steel wire fabric | Kg | 17669 | 94.1 | 16,62,652.9 |
| 7 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 30400 | 89.65 | 27,25,360 |
| 8 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 480 | 6,658.25 | 31,95,960 |
| 9 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 3200 | 93.05 | 2,97,760 |
| 10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 3200 | 111.95 | 3,58,240 |
| 11 | Using M.S. angels 40x40x6 mm for diagonal braces | Sqm | 134 | 4,781.15 | 6,40,674.1 |
| 12 | Providing and fixing bolts including nuts and washers complete. | Kg | 8032 | 140.15 | 11,25,684.8 |
| 13 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 18880 | 142.3 | 26,86,624 |
| 14 | 4.0 mm thick glass panes (weight not less than 10 kg/sqm) | Sqm | 69 | 940.3 | 64,880.7 |
| 15 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 1186 | 545 | 6,46,370 |
| 16 | Acid and alkali resistant tile | Sqm | 977 | 1,515.45 | 14,80,594.65 |
| 17 | Acid and alkali resistant tile | Sqm | 672 | 1,637.7 | 11,00,534.4 |
| 18 | 110 mm diameter | Metre | 111 | 319.75 | 35,492.25 |
| 19 | On concrete work | Sqm | 7040 | 198.4 | 13,96,736 |
| 20 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | Sqm | 480 | 191.4 | 91,872 |
| 21 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 32 | 2,275 | 72,800 |
| 22 | 40 mm dia | Each | 32 | 101.65 | 3,252.8 |
| 23 | Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms | Each | 32 | 109.7 | 3,510.4 |
| 24 | 20 mm nominal dia Pipes | Metre | 480 | 325.1 | 1,56,048 |
| 25 | 15 mm nominal bore | Each | 32 | 715.05 | 22,881.6 |
| 26 | Concrete grade M-35 (Cement content 370 kgs) | cum | 1152 | 19,488.05 | 2,24,50,233.6 |
| 27 | Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing & destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in-charge. | Kg | 2410 | 147.05 | 3,54,390.5 |
| 28 | Lead within 15km | MT | 1152 | 464.8 | 5,35,449.6 |
| 29 | Add/Deduct over item 26.76.1 for every additional lead of 5 km | MT | 22400 | 103 | 23,07,200 |
| 30 | Solid concrete wall elements | cum | 1152 | 2,284.75 | 26,32,032 |
| 31 | Sealant 25mmx10mm at joints | Metre | 8960 | 152.5 | 13,66,400 |
| 32 | 5 mm thick | Each | 7360 | 31 | 2,28,160 |
| 33 | Stirrer mixed cementitious grout (non shrink) of approved make in dowel tubes / Shear keys / Joints of precast members. | Kg | 4800 | 76.7 | 3,68,160 |
| Schedule total | ₹5,21,55,943.1 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
NIT-27-UMB--2026-27.pdf
ATTACHMENT
TNN-27B-WorksDSR-UMB-2026-27.pdf
ATTACHMENT
AdcanceCorrectionslips1234567891011andMasterPolicyforDisputeRedressal.pdf slips of GCC
ATTACHMENT
AdvanceCorrectionSlipofGCC-2022PartII.pdf
ATTACHMENT
SafetyInstructionatWorksSite.pdf
ATTACHMENT
GeneralConditionsforcivilworks.pdf
ATTACHMENT
SPECIALCONDITIONSSr.DEN-2.pdf
ATTACHMENT
AdcanceCorrectionslips1234567891011andMasterPolicyforDisputeRedressal.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .