Loading
Loading…
Loading…
Tender Value
₹75.1 L
EMD Value
₹1.5 L
Closing Date
16 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
MAINTENANC
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union Territory Administration, authorizing execution of electrical works up to 650 V. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 650 V.Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 650 V shall be summarily rejected.
Similar Nature of Work: Supply, installation, testing and commissioning of LT/HT electrical GS assets ORSupply, installation, testing and commissioning of electrification or rewiring of building/workshop. ORSupply, installation, testing and commissioning of Yard/circulating area/street lighting/tunnel/facade lighting. ORSupply, installation, testing and commissioning of high-mast lighting. ORSupply, installation, testing and commissioning of glow signages. ORSupply, installation, testing and commissioning of LT/HT electrical GS sub-station with at least 50% capacity of proposed sub-station ORRepair/overhauling of LT/HT electrical GS assets including LT/HT sub-stations.
49 conditions · 8 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) /Limited Liability Partnership (LLP) etc., and corresponding documents shall be submitted by the tenderer as per the composition of the Firm.
The Bid Security shall be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA of GCC and shall be valid for a period of 90 days beyond thebid validity period. Non-submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non- submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
Eligibility criteria: Eligibility criteria shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Tender Form (First sheet, Second sheet) of The GCC April 2022.
Certificate format (Affidavit) which available as Annexure - V in Mandatory documents. A facility has already created for online submission of Annexure V of GCC in IREPS module; uploading of physically signed Annexure V by tenderer has been discontinued
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) /Limited Liability Partnership (LLP) etc.
The corresponding documents shall be submitted by the tenderer as per the composition of the Firm: Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. HUF: (i) A copy of a notarized affidavit on Stamp Paper declaring that he who is submitting the tender onbehalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. Partnership Firm: (i) All documents as mentionedin para18 of the Tender Form (Second Sheet). Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company(backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders/contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were/are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para10 of the Tender Form (Second Sheet). Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust.(iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as per Clause No.5 of PART -1 of The GCC, April 2022.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Guntakal Division-Provision of lifts on the Foot Over Bridges of Dhone, Gooty, Tadipatri, Yerraguntla and Rajampeta railway stations - Power supply arrangements.
GTL-EM-32-2026-27~SCOR
GTL-EM-32-2026-27
Open
Works - General
6 Months
Anantapur, Andhra Pradesh
₹0
₹1.5 L
25 Aug 2026
25 Aug 2026
2 Sept 2026
157 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 75,09,469.2 | ||
| — | Item Breakup for | details. | — | ||
| Supply, fixing, connecting and comissioning of 12 way SPN Distribution board 12 module of model no. 507612 with metal door of legrand make or equivalent with all connecting accessories complete. | — | — | — | 33,696 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of SPN DB's, 8 way 8 module confirming to IEC:61439 or its latest amendments IP 43 with metal door model no.507611 of legrand make or it's equivalent. | — | — | — | 4,312 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing and comissioning of of 4 way 8+12 modules DB with IP 54, IK 09 of incommer of MCCB upto 100Amps and outgoing for 12 Module with busbar din and neutral link of Model No.507690 of Legrand with all necessary accessories complete. | — | — | — | 77,060 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of DPX3 160+18 of 8 way DB of legrand cat no.5077 47 or its equivalent with metal door with provision for incommer of MCCB upto 160 Amps , bus bar of capacity 250A and outgoing for 18 Modudle with busbar din and neutral link with all necessary accessories complete. | — | — | — | 16,409.4 | |
| — | Item Breakup for | details. | — | ||
| Supply and installation of DPX3 160 thermal magnetic based release; Icu = 36K A; 100A 4 Pole MCCB conform to IEC 60947-2 with its latest amendment, of model no. 4200 95 of Legrand make or equivalent with extended ROM, spreader links (2 sets). | — | — | — | 27,750 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 63A, C-curve 3P MCBs with 10KA breaking capacity with all necessary accessories complete. | — | — | — | 33,264 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 32A, C-curve 3P MCBs with 10KA breaking capacity with all necessary accessories complete. | — | — | — | 28,440 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 40/50/63 A 4P MCB C Curve, 10 KA capacity with necessary connections and all accessores complete. | — | — | — | 33,288 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of C curve DP MCBs of 32/25/20 A with all connected accessories as per IEC 60898-1 with its latest amendments. | — | — | — | 24,416 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of B curve 6A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 with its latest amendments, with all connected accessories. | — | — | — | 5,520 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 with its latest amendments, with all connected accessories. | — | — | — | 5,520 | |
| — | Item Breakup for | details. | — | ||
| Supply, Erection, Testing and Commissioning of RCCB 4P 63A 300mA Sensitivity conforming to o IS 12640 (Part 1) : 2024 with its latest amendments, with all necessary accessories complete as advised by the site supervisor. | — | — | — | 37,899 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, testing and commissioning of RCBO 63A, Four pole, 30mA in accordance with IS 12640-2(2008) or latest with all necessary accessories complete as advised by the site supervisor. | — | — | — | 15,892.8 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 32 A Electromechanical 4P RCBO 30 mA sensitivity in accordance with IS 12640-2(2008) or latest with necessary connections and all accessores complete. | — | — | — | 13,194.3 | |
| — | Item Breakup for | details. | — | ||
| Supply and running of 32 mm dia, Ivory coloured PVC conduit of wall thickness not less than 2 mm with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove/open /shelter. | — | — | — | 35,562 | |
| — | Item Breakup for | details. | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2 mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove/open/shelter. | — | — | — | 1,16,736 | |
| — | Item Breakup for | details. | — | ||
| Cutting of groove in the wall, plastering of surface to the original for concealing of the conduit in the wall (Laying and fixing of conduit will be paid separately). | — | — | — | 16,800 | |
| — | Item Breakup for | details. | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 1.5 sq.mm FRLS Cu. Conductor. | — | — | — | 19,440 | |
| — | Item Breakup for | details. | — | ||
| Provision of concealed wiring with two runs of 1.5 Sq.mm 1100 Volts and one run of flexible copper conductor 1.5 Sq.mm 1100 Volts FRLS PVC insulated wires ISI marked (Phase, neutral and earth)( upto 10 meters lenght) (Rate arrived, considering an average of 7 meters per point) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, ceiling rose, bulb holder and modular type plate cover to MS switch control box including all labour charges complete for light points, ceiling fans and exhaust fans points cat walk points and ioh service buidling points etc. accessories. | — | — | — | 45,030.7 | |
| — | Item Breakup for | details. | — | ||
| Supply and run of 2 nos, 2.5 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 1.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 694 (2010) with latest amendements. | — | — | — | 2,22,360 | |
| — | Item Breakup for | details. | — | ||
| Supply and run of 2 nos, 4.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 694 (2010) with latest amendements. | — | — | — | 1,27,820 | |
| — | Item Breakup for | details. | — | ||
| Supply and run of 2 nos, 6.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 694 (2010) with latest amendements. | — | — | — | 36,190 | |
| — | Item Breakup for | details. | — | ||
| Supply and running of 3 core 2.5 Sqmm Copper flexible cable conforming to IS 694 (2010) with latest amendements. | — | — | — | 51,100 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of metal flush box-12 module of model no:JIM 12 008 of GM FOURFIVE make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 8,340 | |
| — | Item Breakup for | details. | — | ||
| Supply and Fixing of metal flush box-8 module of model no:JIM 08 005/6 of GM FOURFIVE make or its equivalent with 8 module cover plate (With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 7,200 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of metal flush box-4 module of model no:JIM 04 003 of GM FOURFIVE make or its equivalent with 4 module cover plate (With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 4,906 | |
| — | Item Breakup for | details. | — | ||
| Groove Cutting for Modular SwitchBoards (Each=1Module) | — | — | — | 4,592.08 | |
| — | Item Breakup for | details. | — | ||
| Supply and Fixing of Surface mounting plastic gang box-8 module of model no:JS 08 006 of GM make or equivalent with 8 module cover plate (With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 12,021.72 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of surface mounting plastic gang box-18 module of model no:JS 18 010 of GM make or its equivalent make with 18 module cover plate (With support frame) of model no:PK SB 18 010 - CASABLANCA of GM make or equavalant comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 12,884.16 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of surface mounting plastic gang box-4 module of model no:JS 04 003 of GM make or its equivalent with 4 module cover plate (With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 4,993.44 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of of Modular Dummy Plate for modular switch boards | — | — | — | 1,832.64 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 10A SP 1 Modular mini MCB conforming to IS:13947 with its latest amendments, C"Curve Model No.AB 1 111 of GM make or it's equivalent in Module box including all accessories complete. | — | — | — | 3,501.5 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 16 A SP 1 Modular mini MCB 3KA conforming to IS:13947 with its latest amendments, C"Curve Model No.AA 1 112 of GM make or it's equivalent in Module box including all accessories complete. | — | — | — | 1,885 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 16 sq.mm. PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694 : 2010 with its latest amendments. | — | — | — | 6,09,609 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 95 sqmm XLPE insulated underground armoured aluminium cable as per IS 7098(Part 1)1988 with latest amendments ,with necassary lugs and terminations complete. | — | — | — | 4,12,192 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 70 sqmm XLPE insulated underground armoured aluminium cable as per IS 7098(Part 1)1988 with latest amendments and with necassary lugs and terminations complete. | — | — | — | 7,40,936 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 50 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necassary lugs and terminations complete. | — | — | — | 8,61,700 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of HDPE pipe of 63 mm of PE-80 grade in PN-4 size as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 4,62,000 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of LTUG 4 core 25 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1) 1988 with latest amendments and with necassary lugs and terminations complete. | — | — | — | 2,46,576 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of HDPE pipe of 50 mm outer dia of PE-100,PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 96,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and laying of GI Earth Continuity Wire of 6 SWG for providing earth inter connections to the cables etc. | — | — | — | 6,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and laying of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with armourd cable for earth continuity. | — | — | — | 51,540 | |
| — | Item Breakup for | details. | — | ||
| Supply, laying and connecting of 25x3mm GI Flat with 40GSM Zink coated, conforming to IS:280-2006 or latest, it is to be laid & connected from equipment to earth electrode for continuity. | — | — | — | 660 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench in all types soils of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013 The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 67,689 | |
| — | Item Breakup for | details. | — | ||
| HT/LT Cable laying by horizontal boring below track etc by pushing method-Drilling for horizontal bore below track by pushing method by suitable means for laying of GI pipes/ HDPE pipe etc of various sizes, the bore shall be of 200 mm dia & shall be done at a depth of 3000 mm from ground level, it also includes insertion of pipe. | — | — | — | 3,23,550 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23. | — | — | — | 5,850 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench in cement concrete bed flooring by using power drill to a depth of 1.0 Mtr and a width of 0.3mtr. After laying the pipe and refilling the trench with excavated earth and undertaking cement concrete bed flooring to its original shape as was prevailing earlier to the satisfaction of Railways site Engineer and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 2,93,888 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench in rocky soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013 | — | — | — | 2,920 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, connecting and commissioning of 6A 3pin/5pin modular plug socket, with 6A modular control switch on existing control board with wiring. | — | — | — | 21,079.8 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 16 Amps 3/5 pin flush type power plug and socket with modular type switch control including all accessories. | — | — | — | 9,105.18 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 6A Bell push switch with indicator conforming to IS:3854 model no.AHLSBIW100/060, one module cover plate model no.AHLPLCWV01, 1/2 module flush metal box model no.AHZXMIZX01 of Havells make or equivalent make including all other connected accessories complete. | — | — | — | 3,242.56 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser with IP 65 Protection etc., complete., | — | — | — | 83,898 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 20W 4 feet LED tube light with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties for extenstion wires etc for fixing) as per attached railway specification | — | — | — | 23,796.1 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 40W 4 feet LED tube light, with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties for extenstion wires etc for fixing) as per attached railway specification. | — | — | — | 3,579.9 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 120W LED Flood light fitting with all connected materials complete as per attached railway specification. | — | — | — | 76,543.68 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of energy efficient BLDC star electric ceiling fan of 1200mm sweep as per attached railway specification and including necessary plastering, masonry work and clamps nuts bolts etc... | — | — | — | 5,656.46 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing and connecting of Cable Junction Boxes IP 66 with metric knockouts for cable entry Cable junction boxes of model no. DK 1610G of Hensel make or equivalent conforming to IS:13573/92, IEC 60947-3 with latest amedments, with necessary terminals suitable for cables 4-10 Sq.mm and all necessary accessories complete. | — | — | — | 53,900 | |
| — | Item Breakup for | details. | — | ||
| Supply, running, connecting of 1 core 10 Sqmm FRLS, PVC heavy duty insulated mutlti stranded Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendments. | — | — | — | 13,200 | |
| — | Item Breakup for | details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 7004 of Hensel make or equivalent make conforming to IS:13573/92, IEC 60947-3 wit its latest amendments, with necessary terminals suitable for cables upto 70 Sq.mm and all necessary accessories complete. | — | — | — | 1,99,755 | |
| — | Item Breakup for | details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 9255 of Hensel make or equivalent make conforming to IS:13573/92, IEC 60947-3 wit its latest amendments, with necessary terminals suitable for cables upto 25 Sq.mm and all necessary accessories complete. | — | — | — | 7,080 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of 50mm dia GI Pipe 'B' class with threaded at both ends up to 75mm length with coupling/flanges complete confirming to IS: 1239 (Part-I) 2004 with its latest amendments. | — | — | — | 61,488 | |
| — | Item Breakup for | details. | — | ||
| Cement concrete solid block masonry in foundation and plinth or wall with factory- made blocks with cement concrete 1:3:6 with all labour complete. (The wall should be properly plastered as per the advise of site supervisor) | — | — | — | 3,37,025 | |
| — | Item Breakup for | details. | — | ||
| Excavation RE/33/P702/MOD.F | — | — | — | 11,526.55 | |
| — | — | — | as | ||
| — | — | — | per | ||
| — | Item Breakup for | details. | — | ||
| Supply and erection of Earth Electrode as per the RDSO Drg No. ETI/OHE/P/ 7021 (REV.A) or if any latest. | — | — | — | 59,068.1 | |
| — | Item Breakup for | details. | — | ||
| Drilling of 26 Nos of 12 mm dia holes on Earth Electrode | — | — | — | 5,652.5 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of Charcoal | — | — | — | 17,608.5 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of Salt | — | — | — | 12,176.5 | |
| — | Item Breakup for | details. | — | ||
| Provision of RCC earthpit hollow box of size 300 mm x 300 mm x300mm with 50 mm wall thickness as perDrg. no.SDO/RDSO/E&B/001 by using M20 Grade precast RCC. It includes fixing of earth pits at various locations (All the required men, material and transportation are to be arranged by contractor). Supply and Erection of RCC precast slabs with hook to cover earth pits of dimensions as shown in IRSEM Drg. No. 19-D6. All the required materials for this work, i.e. stones,cement, ironand sand etc. are to be supplied by contractor.) | — | — | — | 30,445.1 | |
| — | Item Breakup for | details. | — | ||
| Transportation charges, including loading & unloading of earthing arrangements system material to site/location | — | — | — | 8,699.25 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, testing and commissioning of maintenance-free earthing with all necessary accessories complete according to IS 3043-1987 and as per RDSO spec No: rdso/spec/ps/0109(rev.0)-2008 Amendment'1'. | — | — | — | 3,14,886 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of Copper Strips (25 mm x 3 mm) for Equipment Earthing | — | — | — | 2,61,000 | |
| — | Item Breakup for | details. | — | ||
| Design, Fabrication, supply, installing and fixing of 300 mm width, 62.5 mm depth, 2mm thick sizes perforated G.I. tray (cable Tray), including horizontal stiffeners to avoid sag of tray and vertical bends reducers, tees, cross members and other accessories including fixing with suitable G.I. Clamps / G.I. angles / G.I. flats and with necessary connected hardware etc. | — | — | — | 89,210 | |
| — | Item Breakup for | details. | — | ||
| Supply and Installation of 150mm x 50mm x 2mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete. | — | — | — | 1,10,400 | |
| — | Item Breakup for | details. | — | ||
| Digital Fault Locater, TDR based Cable Fault Locator for metallic cables viz LV power cables/control cables fault location capability 15 KM, Accuracy +/- 01 M at 3000 Meters. One step setup configurable for any cable type. Measures distance to fault in feet / meters. Two pair test capability. Automatic instrument control Mode, splash and drip proof, splits/Crosstalk mode. Intermittent fault location, on-line tutorials, large backlit display, input protection plus/ minus 200V, DC plus peak AC to a maximum of 440 Hz. Battery operated, including test loads (Min.2 pair) carrying case, batteries, user manual and Calibration Certificate. Five numbers free demo at consignee premises. Model TS 90 of Tempo (Stanley) / Greenlee / Megger / Fluke make. | — | — | — | 1,24,908.48 | |
| — | Item Breakup for | details. | — | ||
| Design, manufacture, display and installation of wall /hanging / floor mounting type LED illuminated sign / direction boards in Full Elliptical(FE), Half Elliptical (HE), Semi Elliptical (SE), parabolic /Triangular shape. All the specifications are as per Standard Signages at Stations On Indian Railways- April-2023 or its latest amendment. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage. | — | — | — | 71,673.3 | |
| — | Item Breakup for | details. | — | ||
| Design, manufacture, display and installation of wall /hanging / floor mounting type LED illuminated sign / direction boards in fl a t shape. All the specifications are as per Standard Signages at Stations On Indian Railways- April-2023 or its latest amendment. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage. | — | — | — | 21,682.5 | |
| — | Item Breakup for | details. | — | ||
| Fabrication and erection of 14 SWG CRCA sheet steel enclosure of suitable size for Outdoor LT feeder pillar with IP65, with Double Door, including cutting, bending drilling, welding and reveting etc, complete with cleaning with 7 tank process and painting with EPOXY powder coating including cost and conveyance of all materials and labour charges. The MDBs shall be mounted on suitable required size of CC plinth (CC plinth cost will be paid separately) and secured with bolts, nuts and washers as advised by Engineer at site. The panel comprising of 200A tinned Copper Bus Bar (RYB & N of same size) required shape supported with appropriate DMC / SMC barriers and colour coded with heat shrinkable sleeves, LT 3 Phase Digital Multifunction energy meter with 3 lines LCD display for measuring all the parameters (Voltage/ Current/ Power/Frequency/power factor /kw/kwh/ kvar/kvarh) , Current T/Fs, indication lamps for incoming & outgoing feeders. suppot insulators, neutral links, Incoming & outgoing terminals, suitable cable termination glands , grommets, lugs, connecting wires and all other accessories suit with the following switchgear and accessories. The cables should be properly terminated in the switchgears with necessary lugs and all necessary accessories complete.The panel should comprise of the following Switchgear. 1. Supply and installation of DPX3 160 thermal magnetic based release; Icu = 36K A; 100A 4 Pole MCCB conform to IEC 60947-2 with its latest amendments, of model no. 4200 95 of Legrand make or equivalent reputed make with extended ROM, spreader links (2 sets) -1 no's., 2. Supply and instllation of DPX3 160 thermal magnetic based release; Icu = 36kA; 63A 4 Pole MCCB conform to IEC 60947-2 with its latest amendments, of model no. 4200 93 of Legrand make or equivalent reputed make with extended ROM, spreader links (2 sets) - 2 No's., 3. Supply and erection of C curve DP MCBs of 32 /25/20A with all connected accessories - 4 No's., 4. Supply and fixing of C curve FP MCBs of 32 A with all connected accessories - 4 No's., 5. Supply and erection of LT 3 Phase Digital Multifunction energy meter with 3 lines LCD display for measuring all the parameters (Voltage/ Current/ Power/Frequency/power factor /kw/kwh/ kvar/kvarh) on existing box panel board including connections complete.-1 no's., 6. Supply and erection of LED indicator lamps on the existing box panel board - 2 Sets (of RYB - 3 No's)., 7. Supply and erection of LT current transformer with primary 100/5A to 1000/5A ratio in the existing panel including connections complete -4 no's. (Drawing approval to be taken prior to supply). The Fabricator should have the CPRI approval. | — | — | — | 2,00,216 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
NITIREPSWorks_1.pdf
ATTACHMENT
JPO Digging of cable
ATTACHMENT
Technicalspecifications--9-26.pdf
ATTACHMENT
Scopeofworkforwiring.pdf
ATTACHMENT
Signage Specifications 1
ATTACHMENT
Signages_Standard_Sizes-43-75.pdf
ATTACHMENT
CEGE Technical Circular
ATTACHMENT
ListofLikelySuppliers.pdf
ATTACHMENT
GCC Apr 2022 with Correction slips
ATTACHMENT
EarthingSpecificationMFEandOther.pdf
ATTACHMENT
RITESInspection.pdf
ATTACHMENT
CEGETechnicalCircular07-04-2022_compressed.pdf
ATTACHMENT
GCC_April-2022WithCorrectionSlips._compressed.pdf
ATTACHMENT
RlyBd-JPO-DiggingofCables2013-Re-Circulatedin2022-LATEST.pdf
ATTACHMENT
Signages_Standard_Sizes-1-42_compressed_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].