Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance R O BOGDANG | Admitted-Fee/PreQual/Technical/Finance |
| 3 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 4 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 5 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
Refer Docs
EMD Value
₹14,000
Closing Date
30 Jul 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE EINGINEER MECHANICAL DIVISION KARGIL
Office of Executive Engineer Mech Div Kargil
Providing, fabrication and fitment of Main Gate (02 Nos) of Mechanical Engineering Department Kargil
2022_PWD_7104_1
MDK/E-NIT/17 OF 2022-23
Open Tender
Iron/Steel Materials
Turn-key
20 days
MED Kargil
Please refer Tender documents.
5 documents required · 5 mandatory
₹200
EXECUTIVE ENGINEER MECHANICAL DIVISION KARGIL
₹14,000
Office of Executive Engineer Mech Div Kargil
1 Aug 2022
22 Jul 2022
1 Aug 2022
22 Jul 2022
30 Jul 2022
22 Jul 2022
27 Jul 2022
Amount
Providing, fabrication and fitment of M.S gates 02 Nos separately for the office and workshop complexes at Mechanical Engineering Department Kargil. The gates of size 12’x8’ and 16’x8’ shall be divided in two halves and each half shall slide on either side of the entrance. The each half of the gate shall have the following specifications. The job also includes the fabrication of the departmental logo as per the given diagram half on each part of the gates. The job includes providing, fabrication and proper grouting of the guide channel in M20 mix in RCC.
Workshop complex gate 8’0” (h) x 8’.0” (l) x 2 halves Frame work in 75x40 mm rectangular sectionof density 3.61 kg/m (both verticle/horizontal arrangement)= 58.50 m = 211. 19 kg Fabrication of fixing of spacers 50 x 25 mm rectangular channel of density 1.97kg/m (both vertical and horizontal arrangements)= 39.02 m = 76.87 kg iron mongery including electrode weight complete job(the job includes providing of wicket door with the main gate) = 10 kg Total weight for two halves = 298.06 x 2 = 596.12 kg. (Complete job including labour charges etc.)
Providing / Fabrication and firmly grouting in M20 mix of ISMB 100 channels for rollers in ground the main gate shall slide = 32 RFT = 9.75 RM = 9.75x8.9Kg/Mtr = 86.75 Kg. The channel / beam shall be chamfered on the corners for smooth sliding of the door and fitted with guide rail (hot rolled bar) of compatible cross section (inc cost of guide rails) 20 kg the job includes cost anchoring/fastening posts etc. (Complete job including labour charges etc.)
Office complex Gate 8’.0”(h) x 6’.0”(l)x 2 halves Frame work in 75x40 mm rectangular sectionof density 3.61 kg/m (both verticle/horizontal arrangement) = 43.92 m = 153.93 kg Fabrication of fixing of spacers 50 x 25 mm rectangular channel of density 1.97kg/m (both vertical and horizontal arrangements)= 29.28 m = 57.68 kg iron mongery including electrode weight complete job (the job includes providing of wicket door with the main gate) = 10 kg Total weight for two halves = 221.61x 2 = 443.22 kg (Complete job including labour charges etc.)
Providing / Fabrication and firmly grouting in M20 mix of ISMB 100 channels for rollers in ground the main gate shall slide = 24 RFT = 7.31 RM = 7.31 x 8.9 Kg/Mtr = 65.69 Kg. The channel / beam shall be chamfered on the corners for smooth sliding of the door and fitted with guide rail (hot rolled bar) of compatible cross section (inc cost of guide rails) 20 kg the job includes cost anchoring/fastening posts etc. (Complete job including labour charges etc.)
Providing and fitting of SS gate rollers 12 pairs (for both the gates) to be fitted securely and smoothly under and over the sliding gates. This shall include the cost of fasteners, anchors and allied accessories complete. (Complete job including labour charges etc.)
Providing, fabrication of departmental logo on the gates, split able in two halves as per the drawing details with department name in conspicuous alphabet of corresponding ratio to the diameter of 6’.0”. 24’.8” MS strip of 25 x 4mm with density 1.32 kg/m, MS sheet 6.6 sft = 20 kg including iron mongery. (Complete job including labour charges etc.)
Excavation in trench by manual means in all kinds of soil for pillars 1m in depth, 1 sqm on plane and disposal of excavated earth upto 1 m from cutting edge, dispose area to be leveled and neatly dressed in 1mx1mx1m x 2 = 2cum (Complete job including labour charges etc.)
Excavation in trench by manual means in all kinds of soil for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits, and the like not exceeding 10 sqm on plain depth up to 1.5 mtr and disposal upto 1.5 mts from cutting edge, disposed earth to be levelled and neatly dressed 1. 1’.0” x 1’.6” x 56’.0” = 2.38 cum (for guide channel) 2. 1’.6” x 1’.6”x 60’.0” = 3.82 cum (for turfing pad ) 3. 1’.6” x 1’.6”x 24’.0” = 1.53 cum (for wall foundation on either sides of the workshop gate) (Complete job including labour charges etc.)
Cast in situ PC M10 nominal mix total dry nallah mass 480 kg max exl plums and water 34 kg max per 50 kg of cement nominal mix 20 mm aggregate, nallah split stone @ 20% including curing and excluding form work 65’ x 0.6” x 3’.28” = 4.77 cum 60’.0” x 0’.6” x 1’.6” = 1.27 cum 24’.0” x 0’.6” x 1’.6” = 0.52 cum
M 20 reinforced cement concrete work in walls (any thickness), attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts, and struts, etc., upto floor five level, including const of centering, shuttering, finishing and reinforcement (inc carriage lead up 8km). also includes RCC coping in M15 over the wall vide 2.6 with 75mm over hang on either sides 0’.2” x 1’.6” x 24’.0”= 0.204cum 1 : 3 : 6 (1 cement, 3 coarse sand and 6 graded crushed aggregate) 10 mm nominal size 1 : 1.5 : 3 (1 cement, 1.5 coarse sand and 3 graded crushed aggregate) 20 mm nominal size (10’ x 2’.6” x 1’.5”)x4 + (3’ x3’x 2’.6”)x4 + (6” x 4’x 4’ + 1’.6”)x 4 +1’.0”x1’.0”x 56’ + 1’.0” x 1’.0”x 60’.0” + 1’.6”x 1’.6”x10’.0” +1’.6” x 1’.6”x 24’.0” = 464.50 cft (inc turfing pad foundation) cum (Complete job including labour charges etc.)
Reinforcement for RCC work including straightening, cutting, bending, binding and placing in position of MS & medium steel tensile bars . (Complete job including labour charges etc.)
Providing and fixing upto floor five level precast cement concrete blocks 1: 3: 6 (1 cement, 3 sand 6 aggregate) including, hoisting and setting in position with cement mortar 1:3 (1 cement and 3 sand) inc carriage complete 10’ x 24’’ x 1’ + 3’x 1’ x 60’.0” = 280 cft (Complete job including labour charges etc.)
12 mm cement plaster of mix 1;4 (1 cement 4 fine sand) (2’.6” x 10’) x 8 + (1’.6” x 10’) x 8 + (2’.6” x 1’.6”) x 4 + (24’.0” x 10’.0”) x 2 + 24’.0”x 1’.0” + 2’.0”x 60’.0” (turfing pad wall) = 89.59 sqm. The work shall also include writing of departmental name in English alphabets in the rectangular niche 2’ x 6’ x 0.5’ in Golden Brown fluorescent paint with blue back ground in 3-coats (Complete job including labour charges etc.)
Distempering with 1st quality acrylic distemper, having VOC (volatile Organic Compound), content less than 50 gm/liter of approved brand and manufacture inc applying additional coats wherever required to achieve even shade of colour. Double coat (Complete job including labour charges etc.)
Demolishing of the existing cement concrete/stone masonry by manual/mechanical means inc disposal of materials (debris) within 50 mtr lead (Complete job including labour charges etc.)
Complete painting to both the gates from inside and outside in three coats with synthetic enamel paint of approved brand and manufacture including epoxy primer of superior quality. (Colour: as per the direction of engineer incharge) (Complete job including labour charges etc.)
m/s mohd ali
M/S Mohd Ali
M/S ROQIYA BANOO
M/S MOHD AMIN
MS Mohammad
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .