REPAIR/REPLACEMENT TO FLOORING, JOINERY, PLASTERING, PLUMBING, SANITARY FITTINGS, SUNKEN FLOOR AND CERTAIN B/R ITEM AND PERODICAL SEVICES AND CONNECTED B/R ITEMS TO CERTAIN BLDG OF UNIT 524 AT MISA CAMP UNDER GE (S) TEZPUR

Amount

Taking down chowkhats incl shutters (without taking off shutters from the frame exc 1.5 sqm and exc 4 sqm each all as specified and directed.

Taking down chowkhats incl shutters (without taking off shutters from the frame n exc 1.5 sqm all as specified and directed.

Taking down shutter of any description exc 1 Sqm but n'exc 2 Sqm each all as specified and directed.

Taking down cement plaster on brick walls incl racking out joints, hacking key & scrubbing down with water all as specified and directed.

Demolition cement concrete n'exc 15 cm thick (below or above ground level) all as specified and directed.

Dismantling floor, hearth or all tiling including cement mortar bedding (but not backing coat), removing serviceable tiles to store and rubbish off the premesises all as specified and directed.

Dismantling water tanks and removing exc 500 but n exc 1000 ltrs capacity all as specified and directed.

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store all as specified and directed.

Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store all as specified and directed.

Dismantling of AC sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with L type J type or cranked hook bolts as specified and directed

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/cladding /eaves board to wall and fixed with self tapping screws as specified and directed

Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets all as specified and directed.

M&L for Anodised aluminium snap grid (605 x 605mm) frame work for false ceiling with anodised aluminum main and sub T shall be of size 15 mm x 15 mm x1.5 mm, weighing 0.12 Kg per running meter along the wall with anodised aluminum angle of size 25 mm x 25 mm x 0.35 mm, weighing 0.36 Kg per running meter throgh out wall portion ., fixed with suitable mild steel, bolts, nuts ands washers including 4 mm thick MDF Board self embosssed type including 3 mm dia suspenders etc complete all as specified and directed. Note : The unit rate quoted is deemed to be included for all the above items shall be measured as single unit.

S & F 25 x 3mm F1 hold fast conforming to Fe 290, Gde -E-165 all as specified and directed.

S & F Pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

S & F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

M&L PCC 1:3:6 type C1 20mm grade aggregate as in filling of chowkhats hold fast or any other work or similar work complete all as specified and directed.

S & F 35 mm thick flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side all as specified and directed.

S/F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified and directed

S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing all as specified and directed.

S & F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing all as specified and directed.

S&F mild steel medium weight cold rolled butt hinges 100 mm long and fixed all as specified and directed.

S&F aluminum anodized, barrel tower bolt of extruded section 150mm long all as specified and directed.

S&F aluminum anodized, barrel tower bolt of extruded section 100 mm long all as specified and directed.

S&F 150mm long aluminum handle, cast type, anodized all as specified and directed.

S&F 300mm long brass sliding door bolt with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.

S&F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tackles or galvanised wire staples complete all as specified and as directed.

M & L for hacking out old broken glass (any thickness, size, quality or description) from Metal Frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed.

S & F 3 mm thick ordinary quality sheet glass in squares n.exc 0.5 sqm in each pane glazing with oil putty complete all as specified and directed.

S & F 3 mm thick figured glass in squares n.exc 0.5 sqm in each pane glazing with oil putty complete all as specified and directed.

S & F GI water tubes medium grade with all necessary fitting all as reqd complete of 15mm dia and fixed in walls/floor etc all as specified and directed.

S&F Tubes medium grade GI with all fittings fixed complete to walls and ceiling or laid in floors 20mm bore all as specified and directed.

S&F 500 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F 1000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) all as specified and directed.

S&F 25 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) all as specified and directed.

Supply and fix Plate rack made out of Stainless steel sheet 0.5 thick overall size 800(H)x800(W)x300(D) including brackets or fitted with existing shelves in repair complete all as specified and directed

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed.

S&F for colour Glazed ceramic tiles (250x350)/(450x350) of 7 to 8mm thick, in dado/skirting set 10mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed.

S&F Vitreous China EWC wash down water closet (pedestal pattern, white ) including PVC Sheet cover fixed in repair all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding 1:2 all as specified and directed.

S & F in repair PVC Low level flushing cistern 10 Ltr capacity including all fitting such as flush pipe brackets(Complete) all as specified and directed.

S &F in repair brass CP shower rose swivel type fix to iron pipe all as specified and directed.

S & F in repair 15mm Stop valves cast copper alloy with fancy type chromium plated with long shank and cup (Concealed Type) for iron pipe or for unions and fixed all as specified and directed.

S & F in repair 15mm Angle Stop valves cast copper alloy, fancy type with chromium plated for iron pipe or for unions and fixed all as specified and directed.

Disconnecting existing tanks exc 500 L up to and incl n.exc 1000 L, setting aside (or lowering if required) for water tanks, dewatering, cleaning and sterilization with wire /brush/fine steel wire brush, clothes, removing all dirt and scale and algae formation inside the tank by using TERBAC G5(a lab tested chemical) including writing with yellow paint over base of the tank wall as "TANK CLEANED ON' with date, month and year with a minimum of 10 cm height capital letters/numbers. The cleaning process would follow fwg stages as under: (a) To drain out the water by using exit valve or high capacity dewatering system (b) Cleaning all the algae formation inside the tank by using TERBAC G5 chemical. (c) Scrubbing the walls with mechanized scrubber & fresh water cleaning by high speed jet pump. (d) 1st stage of bacteria screening by decertification by using TERBAC G5 halogen compound. (e) Cleaning the floor of the water tank by industrial vacuum cleaner. (f) 2nd stage of bacteria screening & sterilizing method by using UV ray within the tank & killing all suspended bacteria. (g) 3rd stage of bacteria screening by sterilizing the floor of water tank by using strong oxidizing agent TERBAC-G65. all as specified and directed. Note: The work shall beexecuted through approved agency having borne in the approved list of product/applicator of HQCEEC/E-in-C

Dismantling and breaking up drain pipes AC /CI /PVC set in cement mortar 100mm/75mm all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls or floor 110mm bore all as specified and directed. (Make Prince/Supreme/Kisan)

S&F PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to floors ,75 mm bore .complete all as specified and directed. (Make : PRINCE/SUPREME/KISAN ).

S&F PVC (SWR) bends any radius 110mm bore in repairs all as specified and directed.

S& F PVC(SWR) junction single (single 'T') equal or unequal 110mm bore all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete fixed in repair all as specified and directed.

S&F pillar cock 15mm dia CP fancy type fixed in repair all as specified and directed.

M & L 10mm thick rendering in cm(1:6) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement all as specified and directed.

M & L 15mm thick rendering in cm(1:4) on fair faces of brick work or concrete surfaces and finished the surface even & smooth with WPC @ 2% by the weight of cement. (WPC Will be measured and paid separately). all as specified and directed.

Supply only integral water proofing compound (make: Dr Fixit/Pedilite/fosroc) or equalent all as specified and directed.

M&L 10 mm (average)thick ceiling plaster in CM (1:3) finished even and smooth without using extra cement all as specified and directed.

M&L two coats of synthetic enameled painting over 1 coat of pink primer to new wooden surfaces of any description exc 10 cm width or girth all as specified and directed.

M&L preparing new steel surfaces and applying two coat of synthetic enameled paint over a red oxide primer exc 10 cm width or grith all as specified and directed.

supply and fix toilet paper holder of vitreous china fixed to wall with chromium plated cp brass screw in repair complete all as specified and directed

M&L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection/sub base/path etc complete all as specified and directed.

S&F in repairs 15mm bore fancy type chromium plated bib cock long body with crutch or butterfly handle screwed down for iron pipes all as specified and directed.

S&F in repairs 15mm bore fancy type PTMT bib cock long body with crutch or butterfly handle screwed down for iron pipes all as specified and directed.

S&F in repair PVC jet spray with 1.0 mtr long PVC pipe and CP connector all as specified and directed.

S & F in repair health faucet with 1.00 mtr tube and hook complete all as specified and directed. Make-Prayag Cat no BEA -81 or equivalent of ecco

M & L for Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in repairs all as specified and directed. MAKE: HARDWYN/EVERITE/godrej (all ISI)

S & F in repairs Waste coupling of brass chromium plated (half or full threaded) .(Jaquar/ Hindware) all as specified and directed.

S & F in repairs 32mm bore PVC Waste pipe for wash hand basin complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed. Make: BLUE STAR/DIAMOND/NIRALI (All ISI Marked)

S & F in repair tank cover for PVC tank(500/750/1000Ltrs) cover with 6 mm dia MS bar hinging device and 6mm dia MS bar locking arrangement of 'S; type for monkey protection etc complete all as specified and directed

S & Fin repairs cast iron floor trap with grating 75mm dia including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L chequred cement concrete tiles 25cm X 25cm X 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

S&F mild steel window handles for MS steel windows(right) all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base all as specified and directed.

M&L 40mm the PCC 1:2:4 type B-1 using 20mm graded aggregate as in flooring, finished even and smooth with using extra cement all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.

M & L bricks, sub class 'B', laid dry on edge in floors; with old size of bricks complete all as specified and directed.

M&L brick work with sub class' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 all as specified and directed.

Dismantling timber scantling 40 Sq. cm and over in section, in any position, unframed work all as specified and directed.

M&L 2nd class hard wood in scantling, clean sawn, timber fixed all as specified and directed.

S&F 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges, with brackets complete all as specified and directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed. MAKE: HARDWYN/EVERITE/Godrej (all ISI)

M&L for taking down existing roof treatment from roof and fence and covered surface of old concrete roof picking ,sweeping clena and washing down with water remove dust etc felt/tar felt/PCC/plaster/tiles (any type) and rendering 15mm thick (1:4) mixed with water proofing compound as per manufacture and curing atlest 7 days by pending water over the roof level. complete including disposal of debris out of defence land all as directed applying the roof treatment after cleaning the roof slab as directed by Engr-in-Charge, over finished and dried surfaces of RCC slab and apply one of cold bituminous primer conforming IS-3384-1088@ 0.3 ltr/Sqm and applying APP modified water proofing membrane with non woven polyester reinforcement 3mm thick (minimum) and weight @ 3.50 Kg/Sqm and not less than 160 grams per sqm by torch application .the overlap shall not less than 100mm on reveres direction and 75mm longitunal direction and sealing overlap as approved by GE and finally applying a coat of bituminous aluminum paint @ 0.10 ltr/Sqm over APP on treated top surfaces of roof complete all as specified and directed.

S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specifiedcomplete all as specified

S/F 5.50mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminium frame complete.

M&L for PCC 1:3:6 Type C-1 using 20mm graded stone aggregate as in embedding of hold fast all as specified and directed.

Dismantling of floors or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the premises all as specified and directed.

M & L for Vitrified tiles, light shade 10mm thick (square/rectangular) polished area of EACH tiles exc 0.18 sqm but not exceeding 0.36 sqm in floors etc set over cement screed in CM 1:6,15 mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M & L for Vitrified tiles 10mm thick (square/rectangular) polished area of EACH tiles as in vertical surfaces in skirting etc set over cement screed in CM 1:4,10 mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L for Glazed coloured ceramic tiles (300x200x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match laid over and including 10 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed.all specified and directed.

M&L Non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of EACH tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for one coat of synthetic enamel painting to old wooden surfaces exc 10cm width or girth all as specified and directed.

M&L for applying one coat of synthetic enamel paint on steel surface over 10cm width or girth all as specified and directed.

S&F in repairs for wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets all as specified and directed. (Make:Parryware , Jaquar or equivalent.

S&F in repairs Stainless steel sink with drainage board, 1.00mm thick for kitchen with plug, waste pipe, wasters, including cantilever CI brackets connecting union 50 mm CP waste fitting and PVC waste pipe with CP cup line pipes etc complete all as specified and directed.(overall size 495mmx420mm with bowl size 410mmx330mmx160mm)

M&L for Complete removal of existing treatment and applying two coat of Acrylic emulsion distemper over a coat of primer (chalk whitening) including preparation of wall surfaces all as specified and directed.

M & L preparation of new plastered surfaces and clearcolle for priming to distempering and applying two coats of Acrylic emulsion distemper , white or tinted, over a coat of primer complete all as specified and directed.

M & L applying one coat of white wash on old decorated or undecorated wall surfaces including preparation of surfaces, complete all as specified and directed.

M & L applying two coats of cement paint on newly plastered or unplastered wall surface including preparation of surfaces, over a coat of primer complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coats of cement paint over a coat of primer on old decorated or undecorated wall surface, complete all as specified and directed.

M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preparation of surfaces, complete all as specified and directed.

M&L removing old treated surface and applying two coat of exterior antifungal paint over a coat of primer to wall including , complete all as specified and directed.

M&L removing old treated surface and applying two coats of exterior antifungal paint over a coat of primer over a coat of 3mm thick wall care putty to wall including , complete all as specified and directed.

M&L applying two coats of plastic emulsion paint over a coat of primer to surfaces of any description including preparation over 10cm girth or width, not other wise described complete all as specified and directed.

S & F of Brass chromium plated directive (circular type) tubular towel rail with bracket 60cm long all as specified and directed.

S & F stainlss steel grating doom 125mm dia with waste hole all as specified and directed.

All as per item No 110 above but without hole 100 mm dia.

M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints all as specified and directed.

S&F 15mm bore fancy type bib taps chromium plated , with wall flange screwed down, screwed for iron pipe or brass ferrule etc all as specified and directed. (Make Continental series of Jaquar or equivalent.)

S&F in repair PVC water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed. (Make : Hindware/Jaquar or equivalent)

S&F in repair Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed. ( Make: continental series of Jaquar or equivalent of approved make)

S&F in repairs 20 mm dia decorative curtain rods of MS conduit with polymer lining etc. with decorative side dome and brackets complete all as specified and directed.

S&F in repair 15mm bore Chromium Plated three in one Wall mixer for mixing hot and cold water including provision for over head shower screwed down for iron pipe complete all as specified and directed.

S&F 15mm bore Chromium Plated Wash hand basin mixer for mixing hot and cold water screwed down for iron pipe all as specified and directed. Make:ECCO/BLUE STAR

S&F15 mm dia brass chromium plated pillar tap, with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe all as specified and directed.

SHANKAR ENTERPRISE