Loading…
Loading…
Tender ID
Tender Value
₹7.1 L
EMD Value
₹14,149
Closing Date
4 Feb 2026, 4:00 pmClosed
Executive Engineer, WDX WRD
Works Division X, WRD, Pajimol Sanguem Goa
Providing and fixing kilometer stones and Stainless Steel gauge for SIP main canal from ch 0.39km to 6.50kms of Sanguem Taluka in Sanguem Constituency.
2026_WRD_27470_1
WDX/Accts./2025-26/e-15 sr01
Open Tender
Miscellaneous Works
Item Rate
30 days
Works Division X, WRD, Pajimol Sanguem Goa
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
₹14,149
28 Jan 2026
28 Jan 2026
5 Feb 2026
28 Jan 2026
4 Feb 2026
28 Jan 2026
Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. a. All kinds of soil
Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: a. All works upto plinth level
Reinforced cement concrete M 15 grade kilometre stone factory made of standard design as per IRC:8 1980 fixing in position including painting and printing etc as per MORTH Specificatiom 804 a. 5th kilometre stone(precast)
b. Ordinary kilometre stone (precast)
20mm cement plaster 1: 3 (1 cement : 3 coarse sand)
Providing & fixing Stainless Steel 316 grade for vertical gauge of size 2.30x0.10 x 5mm thick to measure water level in the SIP main canal including fixing the gauge with 3nos of 4" nails of 5mm dia., engraving the scale, numbering, water proof epoxy paint of approved shade etc. complete as per the drawing and as the direction on engineer – in-charge.
Providing & fixing Stainless Steel 316 grade for trapezoidal gauge of size 2.70x0.10 x 5mm thick to measure water level in the SIP main canal including fixing the gauge with 3nos of 4" nails of 5mm dia., engraving the scale, numbering, water proof epoxy paint of approved shade etc. complete as per the drawing and as the direction on engineer – in-charge.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.57 MB
Tendernotice_2.pdf
PDF • 1.03 MB
BOQ_27917.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .