Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹24.0 L
EMD Value
₹47,960
Closing Date
21 Aug 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Provision of Infrastructure facilities in KGBV under CSR activity 2024-25.
9035
HAL/KWD/Civil/14 of 24-25
Works
Accessories Complex - Avionics Divn - Korwa
₹0
₹47,960
21 Aug 2024
1 Aug 2024
1 Aug 2024
21 Aug 2024
Per Sqm
Builders Friend Aug-22
Per Each
Builders Friend Aug-22
Per Each
Per Each
Description of items
Surface dressing of uneven surface not exc. 15 cm deep, cutting & filling, including cutting of wild growth, jungle, cutting and uprooting of plants/ wild vegetation etc. also removal of surplus earth, wild growths, plants etc as directed by EIC upto a lead of 150 Mtr with labour, T&P etc all complete as per specification and direction of EIC.
Grubbing up tree trunk including cutting of trunk portion, digging out roots upto 60cm below ground level or 15cm below formation level whichever is lower protruding over ground, digging out roots, filling holes and levelling off ground, stacking of servicable material within the HAL premises including clearing the site, labour, T&P etc all complete as directed by E.IC.
Earthwork Excavation in foundation trenches, column footing drains, manholes, chambers or any description of similar types of excavation works in all soils except hard rock upto 1.50 mt. depth getting out, including dressing and levelling of trenches sides and also returning filling, dewatering if required etc., all complete as per drawing, specifications and direction of E.I.C. =(383.70 +139.10 )
Trench for masonry, foundation etc @ 5 lt of emulsion per sqm of surface area.
Treating the back fill in contact with masonry foundation@ 7.50 lt. of emulsion per sqm of vertical surface.
Treating of the top surface of the filled earth in filling @ 5.00 lt. of surface area.
Treatment of the soil under plinth protection @ 5.0 lt. of emulsion per sqm of surface area.
Treatment of building perimeter @2.25 litre of emulsion per meter.
Supplying and filling earth brought from outside of HAL premises ( exc.1.5 Km approx. ) including excavation, loading, unloading, transportation, depositing, filling in layer, compaction etc . where directed, T&P etc all complete as per specification and direction of EIC. =(179.10 +433.60 )
Supplying and filling fine sand under floors and below foundation or any other similar description of works in layers not exc 250 MM thick including watering, ramming, consolidation and dressing / levelling, etc., complete with labour, material, T&P and as per specification and direction of E.I.C.
Providing & laying PCC: 1:4:8 (1 cement: 4 coarse sand : 8 graded stone ballast, 40 mm size, Shankergarh or other approved) in foundation, under floors or any other similar description of works eg. drains, pipe lines bedding layers, manholes, road, chambers, duct etc with mechanical mixing including form work, side shuttering, compaction, curing including , materials, labour, T&P etc, required for proper completion of the work as per specification and direction of E.I.C
Providing & laying RCC 1:1.5:3 ( 1cement, 1.5 coarse sand & 3 part, 20mm graded stone aggregate) including cost of all labour, material, T&P, mechanical mixture, platform, placing of concrete in position at any floor without disturbing reinforcement required and preparation of cement concrete by mechanical mixing in the form of volumetic mixing, curing and proper compaction by mechanical vibrators as required and also as per drawing, specification and direction of EIC for roof slab. =7455.00+( 6025.50 - 5330.80 )
Providing reinforced cement concrete in 1:2:4 (1cement, 2coarse sand, 4, 20mm graded stone aggregate) for pre-cast drain cover for man holes etc.,chullah hoods,chajjas,water troughs,mangers,shelves and similar articles with plain faces including cost of all labour, material, T&P, mechanical mixture, scaffolding, platform, placing of concrete in position without disturbing reinforcement required and preparation of cement concrete by mechanical mixing in the form of volumetic mixing, curing and proper compaction by mechanical vibrators as required and also as per drawing, specification and direction of EIC .(Reinforcement will be measured separately).
Providing, fixing and laying TMT reinforcement bars conforming to IS-1786-1985, for any diameter of TISCON / SAIL/ RINL or any other approved make for all type of R.C.C works including straighting, cut to length, bend to shape required, cranking, bending spirally or hooping, spacers / chairs, wastages and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it (RCC) also including cost of all labour, material, T&P etc. all complete at all height as per drawing, specification and direction of E.I.C
Providing, fabricating, fixing and removing, Form work / shuttering of side of concrete foundation footings, base of coloum and raft beams, side and soffit of foundation if any plinth beam and similar work faces of wall retaining wall parapet, staircase railing, landing and similar work edges of cocnrete flats all type of RCC work or any description of works, in required shape and size, with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, including working scaffoldings,ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period as described in MES-SSR- part-I & IS:456 -2000 , etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C.=(316.72 +493.55)/2
Providing and laying class 'A' old size brick (having crushing strength 125 Kg/cm²) work in cement mortar 1:6 ( 1 cement : 6 coarse sand) in foundation and superstructure, walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. =4875.00 +156.00+280.68
Providing and laying class 'A' old size half brick work (having crushing strength 125 Kg/cm²) work in cement mortar 1:4 ( 1 cement : 4 coarse sand) in superstructure, walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. =672.59+17.95
Providing and laying 40 mm thick, cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size of Bharatcoop/Dala/Jhansi) laid in panels, finished with a floating coat of neat cement slurry including rounding of edges, making /finishing surface even and smooth with using extra cement , in required shape , size & gradients etc including all labour, material, T&P, side shuttering, curing etc all complete as per specification and direction of EIC.=(180.20 +90.60+41.50 )
Providing and laying 25 mm thick, cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size of Bharatcoop/Dala/Jhansi) laid in panels, finished with a floating coat of neat cement slurry including rounding of edges, making /finishing surface even and smooth with using extra cement , in required shape , size & gradients etc including all labour, material, T&P, side shuttering, curing etc all complete as per specification and direction of EIC.=(251.20+41.50 )
Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls, darins, manholes, ducts etc of rough / fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC.(189.35+ 227.23) /2+54.02+ 41.12 )
Providing ,rendering, screeding, dubbing out cement plaster 15 mm thick at any depth/height in cement mortar 1:4 (1 cement: 4 Coarse sand )on brick or concrete surfaces of any description fair/rough side ,finishing fair or trowelled to a smooth & even finish with using extra cement including scaffolding ,labour, material, curing, T&P etc. all complete as per specification and direction of EIC. ( 204.80+58.32+67.81)
Providing ,rendering, screeding, dubbing out cement plaster 10 mm thick on ceilings at any depth/height in cement mortar 1:3 (1 cement: 3 Coarse sand )on brick or concrete surfaces of any description fair/rough side ,finishing fair or trowelled to a smooth & even finish without using extra cement including scaffolding ,labour, material, curing, T&P etc. all complete as per specification and direction of EIC.(207.87+41.12+11.95)
Providing ,rendering & plastering 20 mm thick in c.m. 1:3 (1cement, 3 coarse sand) mixed with water proofing liquid of approved make such as pidilite, Dr. Fixit etc.or as approved by EIC ,Qty as per manufacturer specification faces of wall/concrete surface including neat finish using extra cement as a floating coat @ 1.38 Kg/sqm racking out of joints, cleaning of surface, labour, material,curing, lead & lifts, scaffoldings, T&P etc all complete as per specification and direction of EIC.(207.87+62.63+62.63+67.81)
Providing & applying approx. 1 mm thick wall care putty of make birla, berger , ACC or approved make on new work / surface to give a smooth & even finish at all floors on walls / ceilings or any description of works including preparation of surface smooth & even, filling holes / minor pits all complete with labour, material, scaffolding, T&P etc all complete as per specification and direction of E.I.C. =(83.44+90.77)/(2x3)
Providing & applying two coats of weather resistant exterior paint of first quality of approved shade and make like apex of Asian /weather coat long life of Berger/weather shield max of ICI etc including a coat of wall primer, preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding all complete as per specification & direction of EIC.
Providing & applying two or more coats of super synthetic enamel painting on wood surface over a coat of wood primer for any description of works of approved shade, make Asian / Berger / ICI of fisrt quality including preparation of surface with Putty filling, at any height / depth or any descripiton of works at all floors including all labour, material, T&P ,scaffolding all complete as per specification and direction of E.I.C. =(17.10 +32.70 +45.20 *2)
Providing & applying two or more coats of super synthetic enamel painting on MS surface over a coat of red oxide primer for any description of works of approved shade, make Asian / Berger / ICI of fisrt quality including preparation of surface with Putty filling, at any height / depth or any descripiton of works at all floors including all labour, material, T&P ,scaffolding all complete as per specification and direction of E.I.C. =(18.10+32.00 +45.60 *2)
Providing & applying acrylic distemper paint of approved brand and manufacturer like Asian/Berger/ICI two or more coats on new work to give a required shade over a coat of alkali resistant primer suitable for acrylic distemper of above make at all floors on walls / ceilings or any description of works including preparation of surface smooth & even, filling holes / minor pits with Birala putty all complete with labour, material, scaffolding, T&P etc all complete as per specification and direction of E.I.C.(34.70+39.70+24.90)
Providing & fixing Mild Steel window double Z-section frame of one side glass pan MS leaf shutter and other side mosquito mesh leaf of intermediate MS sash bar including all fittings and fixtures like MS hinges, tower bolt 150mm handles 125mm, peg stay etc. all complete in all respects including all material, labour, T&P, wastage and other required fixtures etc. for proper completion as per specification and direction of EIC.=2x2180.62
Providing & fixing 4 mm thick plain glass of approved make such as saintgobian, TATA. triveni etc all complete in all respects including all material, labour, T&P, wastage and other required fixtures etc. for proper completion as per specification and direction of EIC.
Providing & fixing stainless steel mosquito proof jali etc all complete in all respects including all material, labour, T&P, wastage and other required fixtures etc. for proper completion as per specification and direction of EIC.
Providing & fixing 600x 600 mm size vitrified tiles of Nano technology, stain free quality/ series of approved,1st quality & shade floor of approved brand like Johnson, Kajaria, Somany or equivalent approved make of thickness 09- 10 mm or as per manufacturer specification. etc, grouting of tiles with neat cement slurry in required on gradient and joints finished with matching colour pigment and epoxy solution including bedding layer 15 mm (Av. thickness) in c.m.1:4 (1cement, 4coarse sand) and finally cleaning of surface with soft cloth including labour, material, cartage, wastage, T&P, disposal of rubbish at directed place etc all complete as per specification & direction of EIC. =(1469.80 + 223.37 + 67.81 )
Providing & laying glazed antistatic ceramic tiles of size 300 x 300/400x400mm with first quality of Kajaria/Somany or equivalent approved make, shade design in floor over 15 mm thick bed mortar in C.M.1:4 (1 cement, 4 coarse sand) and grouting the joints with epoxy grout with matching shade and sealed finally with transparent epoxy coating, to avoid dirt on joints, including the cost of material, labour, T&P all complete as per specification and direction of E.I.C.=(1149.80+223.37+67.81)
Providing & laying glazed ceramic tiles of size 200x300 mm or larger size with 1st quality of Kajaria/Somany or equivalent approved make including provision of pencil tiles / decorative bands / border in wall tiles , skirting and dado in bedding layer 15mm av. Thickness in CM 1:4 (1cement, 4coarse sand) and grouting the joints with epoxy grout with matching shade and sealed finally with transparent epoxy coating, to avoid dirt on joints, including the cost of material, labour, T&P, curing, scaffolding all complete as per specification and direction of E.I.C. =(1338.40+223.37+67.81)
Providing and fixing to door frame (MS/ Wooden) flush door shutter 30 mm thick (Single / double leaf) phenol formaldehyde bonded, core of block board construction conforming to IS-2202 (Part-1)-1983, with frame of hard wood all round lipping, commerical ply on both faces of shutters of Gee doors/Kit ply/ Swastik or other approved make, ISI mark as approved all complete as per drawings & specification also provisions for door fittings, making holes/ cutting for fixing fittings, making good including labour, material, T&P, cartage, wastage etc all complete as per direction of EIC.
Providing and fixing anodised al. sliding door bolt 250 mm long, ISI marked of apporved make such as classic, shivalik, diamond or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC.
Providing and fixing Tower bolt anodised Aluminium 200mm long, ISI marked of apporved make such as classic, shivalik, diamond or any other approved make as per specification and direction of EIC.
Providing & fixing anodized Aluminium handle 150 mm grip length, ISI marked of apporved make such as classic, shivalik, diamond or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC.
Providing & fixing heavy duty Aluminium extruded hudraulic door closure universal type sleek model of Amar/ Everite make or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC.
Providing and fixing of Heavy duty MS butt hinges 100 mm long, ISI marked of apporved make such as Amit/Elite or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC.
Providing & fixing anodized Aluminium door stopper double peg ISI marked of apporved make such as classic, shivalik, diamond or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC..
Providing , fabricating and fixing M.S. chowkhat, MS grill, grating, railing made out from MS square sections, M.S. angles and M.S. flats as per design, electrically welded and fixed in chowkhats with screws or treads of steps and R.C.C. balcony slabs in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 hard stone aggregate 12.5 mm nominal size) including labour, material & T&P grinding etc. all complete, as per drawing, specification and direction of EIC.
Providing & laying integral cement based water proofing treatment "Brick coba" including preparation of surface, cleaning of surface as required for treatment of roof, balconies, terraces, etc as per following specification with labour, material, T&P, lead & lifts etc all complete as per direction of EIC.
Providing & fixing granite slab of 20 mm thickness on 15 mm thick bed mortar in CM 1:4 (1cement, 4coarse sand), pre-polished on kitchen platforms/ skirting/dado including cutting the stone as per required dimension (size) grinding and polishing, the edge in round shape, filling the joints with suitable filler and matching pigment including all labour, material, T&P etc all complete as per specification and direction of EIC
Cutting hole into existing manholes built in brick wall / stone wall for connecting new drains, making good to pipe and rendering, cutting out existing benching for forming branch channel ( ½ round or 3/4 section ) in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4- 20mm graded stone aggregate) smooth finished and reforming benching as required including all labour, material, cutting, fixing, T&P etc. all complete as per specification and direction of EIC.
Forming contraction (Dummy) joints 65 mm deepx10 mm wide filled with sealing compound grade-`A; of approved brand like Shalimar or any approved reputed make ISI mark including labour, material, cartage, T&P, heating arrangement if required etc all complete as per specification & direction of EIC. =608.70/10
Providing and laying 20-25 mm thick machine cut Kota stone slab in flooring, in steps of stairs, landing, floors etc. of size approx 450 x 450 mm size or as per site requirement , over 20 mm (avg.) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) jointed with gray cement slurry mixed with pigment to match the shade of stone slabs, including cost of rubbing, grinding & mirror finish polishing etc. including cost of labour, material, T&P, wastages etc. works at all height / depth etc all complete as required and directed by EIC.= (1027.40+223.37+54.99+67.81)
Dismantling of Brick Works of any description and in any position including removal of debris at directed place,including cost of transportation, cleaning the area, labour, T&P etc all complete as directed by EIC.=590.00+180.00
Supplying and fixing CPVC concealed pipe 20mm including fittings like brass socket MTA & FTA, CPVC L band, Elbow, clamps, CPVC Sockets and plug with approved brand approved by EIC etc., all complete with all labours, materials , wastages etc., and as directed by EIC.
Supplying and fixing CPVC concealed pipe 25mm including fittings like brass socket MTA & FTA, CPVC L band, Elbow, clamps, CPVC Sockets and plug with approved brand approved by EIC etc., all complete with all labours, materials , wastages etc., and as directed by EIC.
Providing & fixing 100 / 110 mm dia PVC (SWR) pipe of approved make such as Supreme, Diplast , kishan or equivalent fixed to walls including necessary required fittings such as reducer , collars, MS clamps etc and adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC.
Providing & fixing 75 mm dia PVC (SWR) pipe of approved make such as Supreme, Diplast , kishan or equivalent fixed to walls including necessary required fittings such as reducer , collars, MS clamps etc and adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC.
Providing & fixing 100 / 110 mm dia PVC (SWR) bends of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC.
Providing & fixing 75 mm dia PVC (SWR) bends of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC.
Providing & fixing of PVC slotted vent cowels of 75mm dia including all labour, materials, tool & plants, etc. all complete as per specification and direction of EIC.
Providing & fixing of PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia including all labour, materials, tool & plants, etc. all complete as per specification and direction of EIC.
Providing & fixing white glazed Vitreous china orrissa pan of size 580 x 440 make Hindware, Cera, Nycer, Perryware or as approved make and suitable joint for closet inlet, setting in plain cement concrete 1:2:4(1 cement : 2 coarse sand: 4 ,20 mm graded stone aggregate), around the pan as to get the specified thickness of floor complete in all respect inluding 110 mm dia PVC (SWR) P-trap, 110mm PVC extension piece , cutting and finishing the chases in cement mortar 1:3 (1 Cement : 3 coarse sand etc. complete all as required and as per specification and direction of EIC. =(1819.09+715.40+265.00)
Providing and fixing PVC low level cistern of 10 ltr. Capacity of approved make like Perryware/Diplast/Neycer/Cera etc. with provision of 32mm dia PVC flush pipe, bend connecting to the pan with proper jointing, PVC connection 450mm long of Prayag make , complete in all respect including labour, material, T&P etc all complete as per specification & direction of EIC. =(797.24+150.40+83.19+150.00)
Providing & fixing vitreous china white wash basin flat back 550x 400 mm size of approved make such as Hindware, Cera, Nycer, Perryware including 450mm long PVC Connection of Prayag make or equivalent approved make CP waste coupling 32mm dia of L& K, Plumber make , CP bottle trap with coupler 32mmx25mm, MS/RS bracket for fixing of wash basin painted with white paint all complete including cutting and making goods, fixing with cement concrete CC 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates) or with cement mortar 1:3, the walls, RCC work and floor with all labour, material, T&P etc all complete as per specification and direction of EIC. =(1039.88+650.95+150.00+126.75+670.00)
Providing and fixing 15 mm dia CP pillar cock of approved sample like Marc, essess, Jaquar or any other approved make including fixing soota, safeda, labour, material, T&P etc all complete as per specification & direction of EIC.
Providing & fixing 15 mm dia CP bib cock long body of approved make Jaquar, Marc, essess or equivalent approved by EIC including labour, materail, T&P etc all complete as per specification and direction of EIC.
Providing and fixing C.P. angle valve 15mm dia of ARK /L &K/ Gem / Nova make including soota, safeda, all complete with labour, material, T&P etc all complete as per specification & direction of EIC.
Providing and fixing 600 x 450 mm x 5.00 mm bevelled edge mirror with the holes on all the four corners of the glass of superior float glass Modiguard/Saint Gobain/Atul complete with 6 mm thick asbestos sheet/ commercial hard board, ground fixed to wooden cleats with C.P. brass screws and washers all complete with labour, material, T&P etc and as per specification and direction of EIC.
Supplying and fixing to wall C.P. Soap tray of approved sample and quality, size, make Plumber, L&K, essess, Jaquar, Marc etc. or any other approved make including labour, T&P, material etc. complete as per specification & direction of E.I.C. (48.4+115.1)
Making Ferrule connection 20 mm dia with brass ferrule (or connecting screws) , PVC saddle of approved brand like Supreme/Kisan, clamps with CI/PVC mains of any dia pipes including making holes in CI/PVC lines for water connection 20 mm dia with labour, material, T&P with necessary excavation, returning, filling,etc. all complete as per specificatio and direction of EIC.
Providing and fixing Gun metal gate valve 20 mm dia, with iron wheel head, screwed both ends for iron pipe of NMV /NMC / Zoloto / GM or approved make, ISI marked including soota, safeda, labour, material, T&P etc all complete as per specification & direction of EIC.
Providing and fixing Gun metal gate valve 25 mm dia, with iron wheel head, screwed both ends for iron pipe of NMV /NMC / Zoloto / GM or approved make, ISI marked including soota, safeda, labour, material, T&P etc all complete as per specification & direction of EIC.
Providing, fixing in position PVC water tank of 500 Liter Capacity, make Polyplast / Sintex / Supreme or approved make, ISI mark,double layer, including PTMT ball cock 20mm dia - of Prayag / Kisan or equivalent approved make with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe, tank connector and fixed on roof, hoisted and fixed in position on roof, connecting up & fittings, securing access cover etc. including labour, material, cartage, fixing charges, T&P etc all complete as per specification and direction of EIC. =4219.60+427.06
Please write submitted or not submitted below
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
1NIT.pdf
TENDER_DOCUMENT • 0.19 MB
5Pricebid.xlsm
TENDER_DOCUMENT • 0.14 MB
3Pricebidfreeview.pdf
TENDER_DOCUMENT • 0.09 MB
04Chceklist.xlsm
TENDER_DOCUMENT • 0.07 MB
2Technicalbid.pdf
TENDER_DOCUMENT • 0.89 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .