REPAIR MAINT AMC OF LIFT AT ATC REPAIR TO AUTOMATIC VOLTAGE STABILIZER AND ALLIED WORKS AT AFS KUMBHIRGRAM

Amount

Material and labour for preventive and periodical maintenance of 01 No electric operated OTIS Elevator Company india Ltd make luggage cum passanger lift of capacity 13 passengers suitable for serving G+4 floors (total 05 landings) with electric power operated doors, auto electric levelling device complete installed at ATC at AF Stn Kumbhirgram to be maintained round the clock as described in particular specification in reliable, safe and efficient operating condition by regulary examination of lubricating and adjust the mechanical and electrical driving equipment, governer, sleeve shaft assembly, bearing / contacts & governor jaws, car & hall mechanical buttons, car & hall position indicators, car direction indicators and all other card and landing signal fixtures, deflectors, car and counter weight guide rails and buffers, equipment and carry out planned maintenance in a systematic and controlled manner using techniques and expertise consultancy including replacement of parts covered under "Gold Plan" of OTIS Elevator Company Ltd like wire, plug, lubricant, landing wheel, nut and bolts, minor welding, rubber, bushes etc. all as directed as and when required and as specified to the entire satisfaction of Engineer-In-Charge. NOTE:- (a) The visit & maintenance work shall be got executed through manufacturer's authorised technicians of the lift. (b) The spare parts shall be measured & paid separately on requirement basis as "Supply only" under BOQ item Nos 2 to 31 here-in after.

Supply only OSG Assembly .

Supply only OSG Rope 8 mm (Steel wire rope) .

Supply only Cabin Light as per existing.

Supply only Cabin fan 300 mm.

Supply only Warm Shaft bearing.

Supply only Mother Board.

Supply only SMPS (05/ 24 VDC) complete.

Supply only TC contactor 12 Amp.

Supply only OEN Relay with base complete .

Supply only MCB TPN pole 32 Amp.

Supply only Line choke 40 Amp .

Supply only Transformer .

Supply only Break resistor.

Supply only VVVF Drive 7.5 KW FUJI .

Supply only Door drive complete .

Supply only Door Zone sensor complete .

Supply only Floor sensor complete .

Supply only IR screen full length complete.

Supply only Car gate contact complete.

Supply only Landing gate contact .

Supply only Landing gate locking Assmembly complete.

Supply only COP Display complete.

Supply only LOP Display complete .

Supply only 12 volt 18 AH battery.

Supply only Alaram Unit complete .

Supply only Door drive belt complete.

Supply only Door drive motor.

Supply only Break Magnet Coil .

Supply only Terminal Limit Switch complete.

Supply only Guide rail complete.

Disconnection of incoming/outgoing cable from Servo control voltage stabilizer of 200 kVA/60 KVA for carrying out necessary repair work all as directed and carrying of following phase of work. (a)Taking out trolley unit from metal clad housing and dismantling complete, carrying out inspection cleaning and repair of worn out part, gasket, bushes etc all as directed. (b) Opening of controlling chamber and carrying out inspection, cleaning and testing of complete unit, electronic circuit, PCB Board, Driver Assembly repair of worn-out parts etc. (c) Carrying out testing of all metering instruments repair of worn out spares,voltmeter, panel lamp push button, wiring cable etc and testing complete. (d) Inspection and checking of voltage regulation and carrying out proper adjustment and calibration for servo motor as per existing load, repair of spares/components complete and testing all as directed. (e) Carrying out inspection and testing of servocontrol motors repair of all worn out spares / wire with proper greasing oiling / for easy operation and make functional the complete system all as directed. (f) Assembling of complete servocontol unit, and connection of incoming and outgoing cable and make all necessary adjustment and testing complete. Note : (i)Replacement of all spares will measured and paid separately under relevant item here-in after. (ii) All the spareparts are tentative and may vary in specification and quantity during execution.

All as per item No 32 here-in before but for 5 KVA & 10 KVA Servo controlvoltage stabilizer all as specified and directed.

Supply only push button switch for 5 KVA/10 KVA/60 KVA/200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only auto manual switch for 5 KVA/10 KVA/60 KVA/200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only DPDT switch for 5 KVA/10 KVA/60 KVA/200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only Carbon bush for 5 KVA/10 KVA/60 KVA/200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only Micro switch for 5 KVA/10 KVA/60 KVA/200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only Potentiometer for 5 KVA/10 KVA/60 KVA/200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only R.C. network for 3 K.G motor for 5 KVA/10 KVA servo contrl voltage stabilizer. Make- Volina

Supply only R.C. network for 10 K.G motor for 60 KVA/200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only Trigger Transformer for 60 KVA/200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only rotary switch 5 amps for R.Y.B phases for 5 KVA/10 KVA/60 KVA/200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only voltmeter for 5 KVA/10 KVA/60 KVA/200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only ampere meter with 3 nos CT (3 Phase) for 200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only Electronic circuit card (P.C.B) holder for 5 KVA/10 KVA/60 KVA/200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only Electronic circuit card (P.C.B) for 5 KVA/10 KVA/60 KVA/200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only servo motor 3 K.G. torque for 5 KVA/10 KVA servo contrl voltage stabilizer. Make- Volina

Supply only servo motor 10 K.G. torque for 60 KVA/200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only complete micro processor based panel for 200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only drive assembly for 5 KVA/10 KVA/60 KVA servo contrl voltage stabilizer. Make- Volina

Supply only drive assembly for 200 KVA servo contrl voltage stabilizer. Make- Volina

Supply only change over for 200 KVA servo contrl voltage stabilizer. Make- Volina

M/S SKYSCRAPER CONSTRUCTION