Construction of Keldha-2 Checkdam across par river near village Keldha, Ta. Kaprada, Dist.Valsad

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Construction of Keldha-2 Checkdam across par river near village Keldha, Ta. Kaprada, Dist.Valsad

Item Description of Item (with brief specification and reference Rate

Quantity Unit Amount.

No. tobook of specifications) in Figure

Excavation for foundation in all sorts of soil including yellow, sandy,gravelly

soil ,soft &hard murrum ,etc.dry condition including depositing the excavated

1 stuff in uniform layer in banks or as directed etc.complete for lead up to 1.0 1914.20 m3 81.50

Km and all lifts. (By machinery)

(a) Above water table

Excavation for foundation in soft rock including depositing the excavated

stuff as and where directed etc. complete for lead upto 1.0 Km and all lifts.(By

(a) Above water table

Excavation for foundation in hard rock including blasting and chiseling if

necessary sorting out and stacking seperately the usable rubble, depositing

the excavated stuff as and where directed including back filing trenches with

suitable excavated stuff etc. complete for lead upto 1.0 Km. and all lifts.(By

(a) Above water table

Providing and Laying plain / reinforced Design Mix cement concrete of

various grade with cement, sand and course aggregate including

centering, shuttering, batching, mixing, transporting, placing, vibrating,

smooth finishing, curing etc. complete for all lead & lift. (Batching Plant

Based, including dewatering) (Raft, Bottom slab of barrel, footing of columns

etc.)1:3:6 grade

Providing and Laying plain / reinforced Design Mix cement concrete of

various grade with cement, sand and course aggregate including

centering, shuttering, batching, mixing, transporting, placing, vibrating,

smooth finishing, curing etc. complete for all lead & lift. (Batching Plant

Based, including dewatering) C) Piers, Abutment, Wingwall, Headwall,

Returnwall (ii) Concrete M-15 grade

Drilling hole of 35 mm dia. Vertical or inclined in all formations of rock /

6 concrete upto required depth including washing with air & water at required 1313.00 Rmt 2321.70

pressure for following stage of depth. (A) For 0.00 to 10.0 meter depth

Providing and placing in position reinforcement bars including cutting,

7 bending welding, joints where necessary, hooking etc. complete as per 857.49 Qtl. 7194.00

drawing for all lead and lifts. (b) TMT

Back filling the foundation trenches around the structures etc. with selected

8 excavated stuff including watering, ramming, compacting etc. complete. (By 1177.47 m3 19.50

Supplying & Laying mechanically woven double twisted hexagonal Zn + PVC

coated box G.I wire mash gabion size 1.0 x 1.0 x 1.0 mt. filed with15 to 40 kg

trap rubble stone (approximate up 1.65 tone) with mesh size 10 x12 cm

9 including packing, interlocking of stones and fushing the top of gabions and 1520.00 NOS. 2625.26

tying to each other & laying to required line, level slope with all leads and lifts

as directed etc. complete.

Providing and laying Non Woven Geo Fabric Filter over the excavated surface

10 as per specification including stitching with overlap to design profile as 560.00 m2 86.40

directed in tidal range etc. complete.

Supplying and laying mechanically woven double twisated Hexagonal Zn+

PVC coated box wire mesh gabions Size 1m x 1m x 0.50m filled with 15 to

kg. trap rubble stone (approximate 0.75) tone with mesh size 10x12 cm

11 including packing, interlocking of stones & fusing top of gabion & tying to 434.00 NOS. 1779.00

each other & laying to the required line, level slope with all leads & lifts as

directed etc. comp. (Considering lead of 45 km for rubble materials)

Providing inverted filter of 8cm sand and 8cm gravel below/behind

12 wall/pitching including laying to correct slopes after necessary trimming of 433.30 m2 146.90

earth work etc. complete.

Providing inverted filter of 30 cm. Sand and 30 cm. gravel below/behind

13 wall/Pitching including laying to correct slopes after neccesary trimming of 198.10 m2 550.74

earth work etc. comp.

Providing and fixing in position 110mm dia PVC pipe weep holes in abutment,

14 wing wall, and laying training etc. complete. 78.84 RMT 263.70

Providing & fixing in position PVC heavy duty water stops in barrels, trough

and wing wall with 25 mm wide expension joint as shown in drawing

including filling the joints with asphalt pad or bitumins or cork board of

approved quality(B) 300 mm wide PVC water stop.

Supplying and laying trap rubble stone of 10 to 50kg in weight for toe and

core filling including conveying and stacking to required line, level, slope

section including all leads and lifts. conveying materials from stacks and

laying etc. complete.

Providing and fixing marble plate of 2 cm thickness including engraving and

17 filling Paint for letters as directed. 36.00 100 cm2 250.60

Providing & fixing in position sign board of standard size of 1.20mx0.90m

with M.S angle 40mmx40mmx6mm with 3mm thick iron plate including

fixing in 1:5:10 prop. Concrete block size 40cmx40cmx75 cm including

painting existing data on the board etc. complete as directed.

Providing videography on the occasion of function or for on going

19 construction work including dubbing titeling etc. complete including cost of 1.00 4 Hrs 1230.51

cassesstte/CD. (b) Up to 4 Hours

Care and Diversion of river including dewatering during construction of

20 checkdam and allied works as prescribed and directed etc. complite 1.00 JOB 85365.00

Rupees Seven Crore Four Thousand Thirty Seven and Paise Forty Only

I/We am/are willing to carry out the work ................. % above/below percent (Should be written in figures and words) of the estimated

rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Rs. 7,00,04,037.40 Estimated amount put to tender Rs.

In words In words

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which

no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills