Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹9.8 L+₹14,117.30 (1.45%)Rejected-AOC MIL STN AGARTALA | L2 | Rejected-AOC HIGHEST BIDDER | |
| 3 | L3₹9.9 L+₹22,498.30 (2.32%)Rejected-AOC | L3 | Rejected-AOC HIGHEST BIDDER | |
| 4 | L4₹10.0 L+₹25,152.50 (2.59%)Rejected-AOC | L4 | Rejected-AOC HIGHEST BIDDER | |
| 5 | L5₹10.0 L+₹25,547.60 (2.63%)Rejected-AOC | L5 | Rejected-AOC HIGHEST BIDDER |
Tender Value
₹9.7 L
EMD Value
₹19,300
Closing Date
13 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AGARTALA
AGE (I) AGARTALA PIN 901184 C/O 99 APO
SPL REPAIR AND ADDN / ALTN TO BLDG NO T-61 IN ZONE N AT MIL STN AGARTALA
2023_MES_573437_1
8379/E8
Open Tender
Civil Works
Item Rate
180 days
AGARTALA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) AGARTALA
₹19,300
Yes
27 Feb 2023
16 Jan 2023
15 Feb 2023
16 Jan 2023
13 Feb 2023
30 Jan 2023
Amount
Schedule'A' Part-I: B&R works
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.
M&L 25 thick P.C.C (1:2:4) type B-O using 12.50 mm graded stone aggregate as in floor finished rough.
S&F of coloured Non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floor or skirting etc set and jointed in neat cement slurry over 15mm thick screed bed for laying floor finishes in CM (1:6) complete all as specified and as directed
Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)
S&F of Powder coated (minimum 50 micron thick) aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass with stainless steel mosquito proof gauge 0.36 mm nominal dia of wire and average width of aperture 1.40 mm making good disturbed surface of wall complete all as specified and as directed. (Note: Window opening size to be measured.)
Taking down chowkats or frame (without taking off shutters from the frame) exc 1.50 Sqm but n.exc 4.00 Sqm etc complete all as specified and directed.
S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides
M&L for two coats of synthetic enamel paint over one coat of pink primer on wooden surfaces of any description, not otherwise described, over 10cm width or girth incl preparation of new surfaces complete as specified and directed.
S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
S&F of 150 mm long anodised barrel tower bolt of extruded section and as directed.
Dismantling of AC sheet corrugated / CGI corrugated sheets in roofing any gauge and any thickness including ridge, valley/gutter etc.
S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified and directed.
Taking down plaster on brick or stone wall, ceiling etc incl racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed.etc.
M & L 15mm thick rendering on other than fair faces of brick work or concrete surface in cm 1:4 to be finished fair and even with out suing extra cement.
M&L for external rendering 15 mm thick in CM 1:4 mixed with WPC @0.20Ltr/ bag by weight of cement on brick work or concrete surfaces of wall finished even and smooth complete all as specified .Note-WPC shall be measured and paid seperately.
Supply only Liquid water proofing compound
M& L for 1mm thick Wall care putty on wall Surface incl preparation of new surface compete all as specified and as directed
M& L for 1mm thick Wall care putty on wall Surface incl complete removal of existing treatment and preparation of old surface compete all as specified and as directed
M & L two coat of Oil bound distemper over a coat of pimer complete all as specified and as directed
M& L for two coat of cement base paint on new plastered surface over a coat of primer including preparation of surface complete all as specified and as directed
M & L for one coat of cement base paint on old painted surface including preparation of surface complete all as speified.
M & L fo Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) incl preparation of old surface complete all as speified.
M & L for one coat of white washon old ceiling surface including preparation of surface complete all as speified.
Applying one coat of synthetic enamel paint on wooden surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint including preparation of old painted surface.
Applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.
Demolition of cement concrete(un Reinforced) of any description in any position not otherwise specifically provided for etc. complete all as specified and directed.
M & L 75mm thick PCC 1:3:6 type B-2 ( 40mm graded aggregate) thick as in Path & plinth protection & finishing the surface even & fair whtiout using extra cement complete all as specified and directed.
NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details.
M/S PRITAM ENTERPRISES
M/S New Saha Enterprise
M/s Amrit Gope
SHRI CHANDAN CHANDA
M/S PAUL ENTERPRISE
Pranjit kar
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .