Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹20.9 L+₹90,049 (4.51%)Rejected-Finance HM 324 PHASE IX SAS NAGAR MOHALI PB | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹22.3 L+₹2.3 L (11.4%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | Rejected-Technical | - | Rejected-Technical Due to performance not known |
Tender Value
₹19 L
EMD Value
₹38,000
Closing Date
12 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
CERTAIN REPAIRS TO JOINERY, ALUMINIUM PARTITIONING AND OTHER ALLIED WORKS IN ZONE-II TO VII AT TBRL RANGE RAMGARH
2022_MES_541785_2
GE I R AND D/CHD-67/2022-23
Open Tender
Civil Works
Item Rate
180 days
Ramgarh
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹38,000
Yes
14 Feb 2023
15 Dec 2022
14 Jan 2023
15 Dec 2022
12 Jan 2023
29 Dec 2022
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed.
All as per serial item No 1.00 above but exc. 1.5 Sqm and n.exc. 4 Sqm each.
Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and directed.
All as per serial item No 2.00 above but exc. 1 Sqm and n.exc. 2 Sqm each.
Refixing shutters of any description n exc 1 Sqm each in same opening.
Refixing shutters of any description exc 1 Sqm but n exc 2 sqm each in same opening.
Cutting holes for inserting hold fast and making good dismaltled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1as required exc one brick but not exc two bricks complete all as specified and direcrted.
Supply and fixing for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.
Supply and fixing for factory made solid PVC chowkhats or frames of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and directed.
Supply and fixing for aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed.
All as per serial item no 8.00 above but 100mm long.
Supply and fixing for aluminium anodized handle of extruded section 150mm long complete all as specified and directed.
All as per serial item no 9.00 above but 125mm long.
Supply and fixing for aluminium anodized door stopper 140mm long overall length complete all as specified and directed.
Supply and fixing for MS butt hinges medium weight cold rolled 100mm size complete all as specified and directed.
All as per serial item no 11.00 above but 75mm size.
Supply and fixing for continuous (piano) hinges, mild steel, bright finish or electro-galvanised width of trap when open 40mm thick completed all as specified and directed.
Supply and fixing for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel bright finished.
Supply and fixing for 100mm size of aluminium hasp & staple including bolt to hinge plate & fixed with screws, completed all as specified and directed.
Supply and fixing for factory made ERW section window box type ( 'P' Section) with hinges, steel handle, peg stay, complete with glazing bars, dovetailed or welded (to receive glazeed or gauzed) complete all as specified and directed.
Supply and fixing for steel ventilator with top hung shutter includig hinges steel peg stay, handle complete all as specified and directed.
Material and labour for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 410-0 0r Fe 310-0.
Material and labour for plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints using 2nd class hardwood (hollock) complete all as specified and directed.
Supply and fixing for 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.
Supply and fixing for 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made glazed and skelton shutters, open rebated and prepared to receive glass etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members all as specified and directed.
Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made framed, panelled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces and fitted to chowkhats size of rails and styles as per IS-1003 (Part-I). The timber shall be kiln seasoned and chemically pressure treated complete all as specified and directed.
Material and labour for 18mm thick prilaminated high density high moisture resistances (HDHMR) board any colour / sunmica finished wood grains, with white base paint finish UV HDHMR corner side rounding with edge bending tape, PVC boxes, drawer any shape and sizes will be made up by machines matching with final finish (UV) completed all as specified and directed. (Note :- Design and colour approved by GE)
Supply and fixing for 2nd class hard wood plain fillets sectional area exc. 6sqcm n.exc. 13 Sqcm clean sawn, secured with nails or brads completed all as specified and directed
Supply and fixing for for 2nd class hard wood plain fillets sectional area exc. 3sqcm n.exc. 6 Sqcm clean sawn, secured with nails or brads completed all as specified and directed
Supply and fixing for MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair completed all as specified and directed
Supply and fixing for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
All as per serial item no 27.00 above but fixed in repairs.
Dismantling structural steel work incl doors, gates but excluding framed, trusses etc.
Supply and fixing for mild steel work as in doors or gates of angle or other section of grade Fe-410-W with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting) fasteing and fixing complete fixed in repair all as specified and directed.
Supply and fixing in repairs 25mm dia anodised stainless steel fancy type curtain rods with fixing brackets, stops/knobs, roller etc complete all as specified and directed.
Material and labour for PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate as in filling of pressed steel chowkats complete all as specified and as directed.
Supply and fixing for 30mm thick flush shutters, solid core construction, with block board care and both face covered with decorative face veneer with lipping/ frame to match.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame complete all as specified and directed.
Supply and fixing for 2mm thick Fibre glass pin head type with oil putty in suares n exc 0.5 sqm each pane.
All as per serial item no 34.00 above but of thickness 4.8mm.
Supply and fixing for figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 Sqm each of thickness 3.0mm.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions
Supply and fixing for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, 150mm long tower bolt 2 Nos, hinges anodised aluminum snap beading screws etc. complete all as specified and directed.
Taking down aluminium door shutters of size exc. 1.00 Sqm but n.exc. 2.00 Sqm, dismantling the door and replacing the MS anchor rods 10mm dia, both sides screwed and tightening inside frame, both side bottled & reassembled the door, fittings all items glass beading, hinges replacing rubber/aluminium beading where defective and fitted in position complete all as specified and directed.
Supply and fixing for double action floor spring for aluminium door shutters fixed in repairs all as specified and directed.
Supply and fixing in repairs hydraulic door closer of aluminium fixed to door shutters of designation 2 all as specified and directed.
Supply and fixing in repairs 100mm size mortice locks of aluminium body, 4 levers suitable to aluminium door shutters all as specified and directed.
Supply and fixing for aluminium anodised window shutters, powder coated, side hung type without sash bars, aluminium section 83X44.45X2mm thick including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium builders hardware such as peg stage 150mm long -01 No, aluminium handles of size 100mm-01 No as each shutters, window shutter to be fitted with glass panes complete all as specified and directed by Engr-in-charge (glass panes to be measured & paid separately).
Supply and fixing for collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars top & bottom runners, MS handles, etc as specified, erected in position and securing runners with hold fasts & brackets, complete fixed in repairs.
Supply and fixing in repairs ventian blinds, sheer demout blinds of with aluminium roller tube, cassette colour white fabric weight 140gms, light control 70% fabric composition 100% polyester complete all as specified and directed.
Supply and fixing for in repairs ventian blinds, vertical type, complete all as specified and as directed
Supply and fixing in repair plain sheet glass, ordinary quality 4.8mm thick in panels of aluminium doors/windows/partitions fixed with aluminium glazing clips & rubber beading complete all as specified and directed.
All as per serial item no 46.00 above but wired glass 6.4mm thick.
Supply and fixing in repairs powder coated aluminium grills, fixed to aluminium windows/partitions/door frame including all fixing arrangements like aluminium channels, screws etc complete all as spcified and directed
Dismantling existing wall/ceiling board, Partition any type including wooden framed work/GI frame work of any size & specifications all as specified and directed.
Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but including the cost of painting with 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996
Supply and fixing for PVC wall lining consisting of 4 to 5mm thick hollow type single side prelam PVC sheet used instead of plain colour sheet fixed to wall with screw incl matching PVC beading all as per specified and directed.
Supply and fixing for 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
Supply and fixing for rubber beading in aluminium doors and windows fixed in repair
Supply and fixing for aluminium beading in aluminium doors and windows fixed with screw as in repair
Taking down rolling shutters push/pull type and removing all denting, bending & greasing, tightening the springs and refixed in position complete all as specified and directed.
All as per serial item No 54.00 above but gear type operated by handles
Supply and fixing in repairs gauge springs for rolling shutters as per existing complete all as specified and directed.
Supply and fixing in repairs top cover of rolling shutters made out from 1.6mm thick sheet & fixed with nuts & bolts including removing cover complete all as specified and directed.
Supply and fixing for steel rolling shutters with thickness of lathes 1.00mm thick without ball bearing as specified with ventilating portion including top cover anchoring rod, hasp & staple & one shop coat of red oxide primer. Created in position as indicated for push pull or manhole type fixed as in repair.
All as per serial item no 57.00 above but 1.25mm thick gear operated type with level gear box & crank hands.
Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises.
Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed
All as per serial item no 59.00 above item but except brick complete all as speecified and directed
Material and labour for PCC 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in bed plates, hold fast ,lacing course coping, bed blocks etc complete all as specified and directed.
Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water.
Material and labour for Rendering 15 mm thick internal using cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces complete all as specified and directed.
Material and labour for Rendering 15 mm(10+5mm) thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces complete all as specified and directed.
Material and labour for two coats of synthetic enamel painting over a coat of pink primer including preparation of previously untreated surfaces of wood or wood based material exc. 10 cm width or girth complete all as specified and directed.
Material and labour for painting one coat of synthetic enamel paint on steel surfaces (finished coat) to flat surfaces of any descirption including preparation of old surfaces all as specified and directed.
Material and labour for two coats of synthetic enamel paint including one coat of red oxide primer on steel surfaces exc. 10cm width or girth including preparation of new surfaces, complete all as specified and directed.
Material and labour for two coats of cement base paint over a coat of white wash on new plastered surfaces including preparation of surfaces.
Material and labour for preparing newly plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whiting, white primer complete on walls
Taking down carefully copper /aluminium point wiring (Light, fan, socket, or power) complete including fittings and fixture such as switches, ceiling roses pendents, regulators sockets / DBs / main switches include boards etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately), removing material, from site and making good the disturbed surfaces of walls, floor complete all as speecified and directed
Taking down carefully by sub main wiring/service connection of any type complete all as speecified and directed
Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC (FRLS) insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor PVC conduit not less than 20 mm as per IS with all fittings such as bends, tee,junction boxes of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 and as per existing colour of white wash / paint / OBD / cement base paint for one light point controlled by one switch complete. complete all as specified and directed. Note :- GI steel box and modular cover frame with plate shall deemed to be included in quoted rate against this item.
All as per serial item no 71.00 above but for one fan point controlled by one switch complete.
All as per serial item no 71.00 above but for bell point controlled by one bell push complete.
All as per serial item no 71.00 above but for one light point controlled by two way switchs complete.
All as per serial item no 71.00 above but for 3 pin 5 Amp socket outlet on the same board with other switch, sockets.
All as per serial item no 71.00 above but for 3 pin 5 Amp socket outlet independent complete.
All as per serial item no 71.00 above but for 3 pin 15 Amp socket outlet independent with 2.5 Sqmm copper conductor complete.
Material and labour for point wiring in existing concealed conduit with PVC insulated, unsheathed, single core two run multistandard copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in existing PVC conduit medium grade and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 and as per existing colour of white wash / paint / OBD / cement base paint For one light point controlled by one switch complete. complete all as specified and directed. Note :- GI steel box and modular cover frame with plate shall deemed to be included in quoted rate against this item.
All as per serial item no 72.00 above but for one fan point controlled by one switch complete.
All as per serial item no 72.00 above but for bell point controlled by one bell push complete.
All as per serial item no 72.00 above but for one light point controlled by two way switch complete.
All as per serial item no 72.00 above but for 5 or 3 pin 5 Amp socket outlet on the same board with other switch, sockets.
All as per serial item no 72.00 above but for 3 pin 5 Amp socket outlet independent complete.
All as per serial item no 72.00 above but for 3 pin 15 Amp socket outlet multipurpose independent using 2.5 Sqmm FR Copper conductor with 1.5 sqmm multistranded FRLS copper conductor as earth Wire.
Supply and fixing for modular switch one way 6 Amp,1 Module complete all as specified and directed.
Supply and fixing for modular socket, 6 amps-2/3 pin combined, 2 Module complete all as specified and directed.
Supply and fixing for modular switch , one way, 16 amps, one Module complete all as specified and directed.
Supply and fixing for modular socket 16 amps-6 pin multipin, 2 Module complete all as specified and directed.
Supply and fixing for modular switch 2 way 6 Amp,1 Module complete all as specified and directed.
Supply and fixing for modular bell push 6 Amp,1 Module complete all as specified and directed.
Supply and fixing for modular Fan regulator electronic step type 230 V 2 Module complete all as specified and directed.
Supply and fixing in repairs Ceiling rose surface type, PVC/Polycarbonate islated body size 50x28 mm two to three terminals.
Supply and fixing for call bell, 6 Amps, 230 Volts, SP complete all as specified and directed.
Supply and fixing for PVC condute/casing caping as required 40mm including of all tee, bend, elbow etc with fixing accessories complete all as specified and directed.
Supply and fixing in repairs Modular white cover plate with frame, 1 Module complete all as specified and directed.
Supply and fixing in repairs Modular white cover plate with frame, 2 Module complete all as specified and directed.
Supply and fixing in repairs Modular white cover plate with frame, 3 Module complete all as specified and directed.
Supply and fixing in repairs Modular white cover plate with frame, 4 Module complete all as specified and directed.
Supply and fixing in repairs Modular white cover plate with frame, 6 Module complete all as specified and directed.
Supply and fixing in repairs Modular white cover plate with frame, 8 Module complete all as specified and directed.
Supply and fixing in repairs Modular white cover plate with frame, 12 Module complete all as specified and directed.
Supply and fixing for metal fiush mounting box 1/2 module of complete all as specified and directed.
Supply and fixing for metal fiush mounting box 3 module of complete all as specified and directed.
Supply and fixing for metal fiush mounting box 4 module of complete all as specified and directed.
Supply and fixing for metal fiush mounting box 6 module of complete all as specified and directed.
Supply and fixing for metal fiush mounting box 8 module of complete all as specified and directed.
Supply and fixing for metal fiush mounting box 12 module of complete all as specified and directed.
Material and labour for wiring for circuit/ sub main wiring alongwith earth wire with size of 2x1.5 Sqmm+1x1.5 Sqmm earth wire, PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable in Concealed/surface as required using cables inciuding in PVC conduit/casing caping.
All as per serial item no 96.00 above but size 2x2.5 Sqmm+1x2.5 Sqmm earth wire,
All as per serial item no 96.00 above but size 2x4.0 Sqmm+1x4 Sqmm earth wire,
All as per serial item no 96.00 above but size 2x6.0 Sqmm+1x6 Sqmm earth wire,
Supply and fixing for lamp holder insulated body with back plate for batten fitting complete all as specified and directed.
Supply and fixing for surface and wall mounted LED Batten 10W (2 Feet) light fitting with decorative end caps LED lighting fixture delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant acrylic diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation, energy efficient ready to use pack 10W LED complete with tube, & duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting to ceiling rose all as specified and directed
Supply and fixing for surface and wall mounted LED Batten 20/24W (4 Feet) light fitting with decorative end caps LED lighting fixture delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant acrylic diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation, energy efficient ready to use pack 20/24W LED complete with tube, & duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting to ceiling rose all as specified and directed
Supply and fixing for 2'x2' 36W LED suitable for armstrong/grid/POP ceiling, ultra slim 2x2 LED flat panel delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant frosted diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation complete with seprate electronic driver & high brightness SMD LEDs, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed
Supply and fixing for LED Bulk Head 10W -IP65 decorative oval bulk head edge LED lighting fixture comprising of pressure die cast housing with acrylic diffuser IP 65 protection, frosted heat resistant polycarbonate diffuser for glare free uniform light distribution powered by a inbuilt electronic constant current driver with no UV & IR radiation,energy efficent surface mounted ready to use pack 10W LED, complete with connecting accesseries duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed .
Supply and fixing for sheet metal inclouser single pole and neutal with 02 Pin and earth plug and socket complete with 01 single pole 20 Amps 240V, MCB complete incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified as directed
Supply and fixing for in repair sheet metal enclosure for DBs when MCBs to be used single pole and neutral with acrylic door IP 43 protection, 240 volt with 200 amps rated bus bar bar 12 way of complete all as specified and directed
Disconnect and insulate electric supply wire and taking down carefully ceilling/ exhaust fan of any make and sweep dismantlling blades, check for repairs required, & refixing complete all as specified and directed
M/S MATLOOB AHMED
SONA BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .