C/o Judicial Court Complex at Karsog Distt. Mandi H.P. (SH C/o Boundary wall and edging near main gate)

Earth work in excavation for structure as per drawing and technical specification clause 305.1 including setting out construction for shoring and bracing removal of stemps and other deleterious materials and disposal upto lead any meter dressing of side and bottom and back filling in trenches with excavated suitable material ordinary soil upto any depth or as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.

Providing and laying concrete for pain/reinforced concrete 1:4:8 (one cement : four sand : eight graded stone aggregte) in open foundations complete as per drawing and technical specification clauses 802,803.1202 and 1203 as per direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals.

Providing and Laying filter media with granular crushed aggregate as per specification to a thickness of not less than 600mm(six hundred millimeter) with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specifications clause 1204.3.8 or as per direction of engineer in charge including carriage of materials with in all lead and lifts and other incidentals.

Providing weep holes in brick masonary/stone masonary/plain reinforced concrete abutment,wing wall,return wall with 100 mm (one hundred milimetre) dia PVC pipe extending through the full width of structures with slope of 1(v):20 (H) towads drawing face complete as per direction of Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals..

Brick work with common burnt clay machine moulded (erfprrated bricks of class designation 12.5 conforming to is 8.21 2222 in superstructure above plinth level upto floor five level in cement mortar 1:6 (one cement: 6 coarse sand) as per direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1cement 6 coarse sand) as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals .

Providing and applying white cement based putty of average thickness 1mm (one millimetre) if approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per direction of Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals.

Finishing walls with 100%, Premium acrylic emulsion paint having VOC less than 50 gm/litre (Fifty Gram per litre) and UV resistance as per 15 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives as per direction of Engineer-in- Charge including camage of materials within all leads and lifts and other incidentalsNew work (Two or more coats applied 1.43 litre/10 sqm(One point Forty litre per Ten square metre) Over and including priming coat of exterior primer applied 0.90 litre/10 sqm(Zero Point Ninty litre per ten square metre)as per direction of Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals..