PROVN OF FOL BAY, IRON GRILLS AND PATH TO GARBAGE BIN AND ADD/ALTN OF ELECTRICAL WIRING AT DIFFERENT UNITS OF AF STATION PHALODI.

Amount

M&L for Framed work as door or gate type hunge type or other section with gusset plates rals braces etc complete drilled for fixing of steel sheeting or other covering to door or sliding with and including grills, grating etc with ends bar shouldered/riveted, including plinth hinge stops and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed.

Supply and fixing Welded steel wire fabric complete to wood or steel members weight per square metre n exc 4kg complete all as specified and directed.

M&L for complete removal of existing treatment of plastered/unplastered surfaces of wall including preparation of old surface, cornices, pilasters etc.and applying three coats of white wash on wall complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade of cement concrete with grey cement and pigment complete all as specified and directed.

M&L for sand filling under floors including spearding and levelling in layers 30 cm thick complete all as specified and directed.

MM&L for cement concrete (1:2:4) type B0 using 12.50 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railigs upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, sligtly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM in (1:4) finished fair and even external surface complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in foundation filling, sub base and mass concrete complete all as specified and directed. complete all as specified and directed.

M & L for 75 mm thick cement concrete type C-2 (1:3:6) using 40mm graded stone aggregate as in plinth protection finished even and smooth etc complete all as specified and directed.

M&L for cutting holes in brick walls exceding one brick wall but n.exc two brick wall, built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) Type B-1 as required complete all as specified and directed.

M&L Test point terminal block made of Phosphorous bronze size 75 x 75 x 25 mm drilled & screwed incl 3 Nos, 8mm dia, 25mm long Hexagonal head Screw complete all as specified and as directed .

Supplying and laying/fixing GI tubing light grade 40 mm dia for encasing strip for mechanical proctection, laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall/floor or as mounting bracket bend to shape with complete accessories such as bends/sockets/reducers/saddles incl necessary threading/drilling works all as specified and directed.

Excavation in trenches in hard soil not exc 1.5mtr wide and not exc 1.5mtr in depth for taking out old pipe and laying new pipe line etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out complete all as specified and as directed.

Returning and filling including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in any type of soil complete all as specified and as directed.

Removing surplus hard soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and as directed.

Material & Labour for point wiring with three layer PVC Insulated 1.5 Sqmm multi-strand copper conductor FRLSH cable 1100 Volts grade drawn into in stove enamelled steel conduit conduits including all fitting and fixing accessories( bend, tee, junction box etc) on surface/concealed conduit of size 20mm heavy duty ISI marked , fire proof steel terminal sunken boxes for One light/ Fan Point controlled by one switch including 1.5 sqmm copper conductor cable FRLSH connected to common earth dolly complete all as specified and as directed .

Supply and Fixing LED flameproof light 1X16/20 Watt, 4' long with die cast alluminium housing with heat resistance toughten glass with LED tube light fixture driver, holder, connector etc prewired including connecting up with 3 core copper cable in steel flexible pipe complete all as specified and directed.

S&F flame proof / weather proof Exhaust fan 12" single phase with louvers complete all as specified and as directed.

S&F flame proof / weather proof LED Bulkhead light fitting complete with 10 watt LED and making necessary electric connection to ceiling rose with copper condutor of suitable size & length complete all as specified and directed.

S&F flame proof switch rotary type with termination box in LM 6,16 Amp , Single pole ON-OFF, 240 Volt Complete all as specified and as directed.

S&F flame proof/ WP enclosure for control panel / Distribution panel Incoming 63 Amps ,240 Volt , out going terminal chamber Out Going MCB 63 Amp DP-01 No , 10Amp SP-04 Nos , 32 Amp SP-04Nos, 40 Amp SP-04 Nos Complete all as specified and as directed .

S&F flame proof / weather proof LED Flood light fitting 60Watt complete all as specified and as directed.

S&F Copper strip 25 x 3.15mm with saddels and fixing screws for roof conductors and down conductors avobe ground ,Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/ pipe or fixed to poles or fixed to wall on insulators or any other indicated situation for loop earthing etc as required 25X3.15mm copper strip complete all as specified and as directed

Supply and fix Air termination , single pointed aluminium rod 12 mm dia and 300 mm long complete all as specified and directed.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep below normal ground level), with top edge of the plate vertically to depth of not less than 1.5 m below normal ground level connected to and incl GI strip 25x4 mm and GI pipe 40 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl PCC cover and , watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and directed. ( Note : PCC chamber shall be constructed at least 1.5m away from earth pit pipe for watering shall be provided in slanting manner.)

Surface dressing n exc 15 cm deep and getting out in any kind of soil complete all as specified and directed.

Excavating in trenches, n.exc 1.5m wide and n exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10sq m on plan and n.exc 1.5m in depth and getting out in Hard/dense soil complete all as specified and directed.

Add to Item No 39 for each additional 1.50m or part thereof in depth beyand the first 1.5m complete all specified and directed.

M&L for 100 mm thick PCC 1:4:8, type D2 as in foundations, filling and mass concrete using 40 mm graded stone aggregate complete all as specified and directed.

M&L Pre-cast cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in Cement mortar 1:6, complete all as specified and directed.

M&L reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregate in foundations including rafts, footings, foundation beams, plinth beams, bases for columns, under reamed piles and mass concrete complete all as specified and directed.

M&L reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregate in columns, pillars, piers, posts, struts and the like complete all as specified and directed.

M&L reinforced cement concrete M-25 grade (Design mix) using 20mm graded stone aggregate in Beams, lintels upto 1.5m clear span, chajjas seismic and other similar bands, lintel bands, roof bands and the like complete all as specified and directed.

M&L RCC M-25 (Design mix) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for use and waste of rough finish formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed

M&L for use and waste of rough finish formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for use and waste of rough finish formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide for rough finished surfaces complete all as specified and directed.

M&L Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per 52 here-in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L rendering 10mm thick in cement mortar 1:6 on fair faces of brick/block masonary or on concrrete surfaces in CM 1:6, finished even & smooth without using extra cement complete all as specified.

M&L rendering 5mm thick on ceiling surfaces in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick surface other than fair faces of brick/block masonry work or concrete surface in two layers (5mm thick CM 1:4 over 10mm in CM 1:6) finished even and smooth without using extra cement mixed with water proofing compound @ 3% of cement on top layers complete all as specified and directed. (Note WPC measured and paid separately.)

M&L rendering 10mm thick on concrete surface over the roof in CM 1:4, finished even and smooth without using extra cement mixed with water proofing compound @ 3% of cement complete all as specified and directed. (Note WPC measured and paid separately.)

Supply only Integral water proofing compound compete all as specified and directed.

M&L for cement plastered surfaces with one coat of cold applied bituminous primer @ 0.40 ltr/Sqm conforming to IS-33894 and laying APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5kg/sqm, reinforced with polyester non woven fabric (weighing not less than 150gms/sqm) and upper side of the membrane thermally insulated with white mineral gravel, uniformly embedded during manufacturing process shall only be used. It shall be laid by torch application. Side over laps shall be 75mm and the end lap shall be 100mm and all over laps and joints shall be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside the parapet groove. This shall be finished by a membrane flashing complete all as specified and directed.

M&L for Framed work of Fe-290 (Gde E165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F steel door including projecting type hinges, steel handle, complete with glazing bars, dovetailed or welded complete all as specified and directed.

M&L preparation of new steel surfaces of any description over exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Earth filling under floors including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick cement conrete 1:4:8 type D2 (using 40mm grade stone aggregate) as in sub base of floors complete all as specified and directed.

M&L for 55 mm thick PCC 1:2:4 type B0 as in floor finishes complete all as specified and directed.

M&L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregates) as in plinth protection finished even and smooth w/o using extra cement with joints 10mm wide and in full depth at corners and @ 3. m c/c filled with mastic mortar complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor (600 mmX 600 mm) etc set and jointed in neat cement slurry screed bed 15mm thick in 1:6 and pointed in coloured cement to match with coloured tiles complete all as specified and directed.

M&L for preparing on newly plastered wall surfaces and applying two coats of cement base paint of 1st grade quality white or tinted in one or more tints and pattern (camouflage) as approved, over a coat of primer complete all as sepcified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash as in ceiling etc complete all as sepcified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash as on walls etc complete all as sepcified and directed.

S&F in replacement LT feeder pillar box factor made cubical type dust proof, out door type both side opening of size 100 x 80 x 40 cm of MS sheet 3 mm thick power coated machine pressed front opening with rubber gasket / bedding , locking arrangement with sliding bolt including aluminium bus bar of 400 amps 4 strips mounted on insulators each strip should be munted minimum two insulator and nut bolt panel shall be mounted on angle iron frame and legs made from angle iron of suitable size duly spray painted internally and externally with two coat of synthetic enamel paint over a coat of red oxide primer grouted in PCC 1:2:4 type ‘B’ ( using 20 mm graded stone aggregate complete incoming / outgoing cable provision complete all as specified and directed.

Supply, laying, testing and commissioning cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, elecric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed. Note:- (i) Cable may be laid in trenches, under road, across the Nallah, along poles/walls and ducts etc. (ii) Excavation, earthwork, sand cushioning, cable cover, pipe for cable protection to be measured and paid separately.

M&L for dry tibba sand in trenches for cushioning to under ground cable spreading, levelling, hand punning complete all as specified and directed. Note- Punned down thickness will be measured for payment purpose.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm, laid by dry and abutting each other with gap between adjacent slab not exedding 10 mm over under ground cable for protection complete all as specified and directed.

Material & labour for Providing, cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate for pole base foundation and coping complete all as specified and directed.

Material and labour for 40mm graded stone aggregate for spreadng/ loose filling under four pole structure, E/M installation and other places complete all as specified and directed.

Taking down carefully existing copper/aluminium point wiring (light/fan/sockets) complete with all accessories such as switches sockets ceiling rose, wall bracket etc and removing dismantled material and making good disturbed surface of walls/floors etc matching with existing surface etc complete all as specified and directed

M&L point wiring for one light point /ceiling fan point controlled by one switch with 1.5 Sqmm PVC insulated, sheathed multi strand copper conductor cable FR-LSH in and including PVC cashing capinng , medium duty, ISI marked fixing of sunken box for one light point/ fan pont including PVC insulated sheathed 1.5 Sqmm multi stranded copper conductor cable FR-LSH connected to common earth dolly for fixing of switch,sockets etc complete all as specified and directed

All as per srl item No. 67.00 (here-in-before) but for one 3 pin socket out let 5 Amp on independent board.complete all as specified and as directed.

All as per srl item No. 67.00 (here-in-before) but for 15 Amp socket out let by using 2.5 Sqmm PVC insulated sheathed copper conductor cable FR-LSH multi strand on independent board including provn of 1.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directedcomplete all as specified and directed.

S& F piano switch flush type piano switch, 6 Amp 240 Volt AC,1 module (ISI Marked) one way etc complete all as specified and directed.

S&F socket outlet 3/5 Pin 6 Amp 230 volts AC flush type 2 in 1 complete all as specified.

S&F Switch 16 Amp, flush type complete all as specified and directed.

S&F socket 16 Amp, flush type complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

S&F ceiling rose surface bakelite 65mm x 50mm, 2 to 3 terminals with back plate etc complete all as specified and directed.

S&F in replacement of LED batton fitting 1 x18/20 Watt, 6000K, 4" complete fitting incl taking down unsv fitting complete, connection with 2 core flexible cable 23/0.00076 from ceiling rose to tube fitting connection etc complete all as specified and directed.

S&F in replacement of LED light fitting, 1X25 watt,5700 K complete with tuff net glass protection IP:66, fixed to walls incl taking down unsv fitting complete, with GI bracket made out of suitable size of light grade pipe 32 mm dia tubing upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of 25x3 mm MS flat iron with suitable bolt and nuts and testing etc complete all as specified and directed.

M&L for Sub main wiring with 2 runs of 4 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn in PVC Casing Caping on wall/roof and one run of 4 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor including taking down old unsv submain wiring complete all as specified and directed. Note : Two runs of 4 Sqmm cable and one run of 4 Sqmm earth conductor shall be measured and paid as one unit length.

M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn in PVC Casing Caping on wall/roof and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor including taking down old unsv submain wiring complete all as specified and directed. Note : Two runs of 6 Sqmm cable and one run of 6 Sqmm earth conductor shall be measured and paid as one unit length.

Supply and fixing double door VTPN Distribution box sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting , 8 way, 415 Volt, fitted with shrouded nutral , insulated pin type copper bus bar , Din rail , earth bar of of 4 way , complete with MCCB 125 Amps as incoming complete all as specified and directed.

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting TPN, 4 way, 230 Volt, with 200 Amp rated bus bar suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed.

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting SPN, 8 way, 230 Volt, with 200 Amp rated bus bar suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed.

Supply and fixing Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket, one single pole 20 Amps, 240V MCB complaints complete all as specified and directed

S&F MCB TPN 100 Amps C curves MCB repturing capacity 10 KA etc complete all as specified and directed.

S&F MCB TPN 63 Amps C curves MCB repturing capacity 10 KA etc complete all as specified and directed.

S&F MCB SPN 63 amp C curves MCB repturing capacity 10 KA etc complete all as specified and directed.

S&F MCB SPN 40 amp C curves MCB repturing capacity 10 KA etc complete all as specified and directed.

S&F MCB 6 Amp to 32 Amp SP capacities 'C' series 10KA rupturing capacaity complete all as specified and directed.

S & F Exhaust fan heavy duty size sweep 300 mm sweep, 230 v, 50 Hz , complete with metalic louvers including making holes and making good the disturbed surface and 3 core copper wire of size 0.50 sqmm for connection complete all as specified and directed

S & F MCCB Four pole 160 Amps, 36 KA ,415 volts AC complete all as specified and as directed.

M&L for earthing complete with copper earth plate 600 mmx600 mm x3.15 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including copper strip 20x3mm by means of bolts, nuts, check nuts and washers of copper/brass including providing of alternate layer from bottom edge to 30cm above top edge of earth plate by chemical fill compound, ground enhancing material, earth powderand after that 1 m back of layer of charcoal dust and common salt including PCC pit in PCC (1:2:4) type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle including excavation and earth work in any type of soil and medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 40mm bore main board complete all as shown in electrical plate No 3 connected to main control board all as specified and testing on completion including dismantling of old earth plate complete all as specified and directed. Note: (i) Excavation, earthwork, charcoal, PCC pit is covered under this item. (ii) Contractor shall be produced the result of earth below 1 Ohm othrewise earthing will not be acceptable.

Supply, laying, testing and commissioning cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, elecric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 3.5 core complete all as specified and directed. Note:- (i) Cable may be laid in trenches, under road, across the Nallah, along poles/walls and ducts etc. (ii) Excavation, earthwork, sand cushioning, cable cover, pipe for cable protection to be measured and paid separately.

Supply, laying, testing and commissioning cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, elecric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 95 Sqmm 3.5 core complete all as specified and directed. Note:- (i) Cable may be laid in trenches, under road, across the Nallah, along poles/walls and ducts etc. (ii) Excavation, earthwork, sand cushioning, cable cover, pipe for cable protection to be measured and paid separately.

Deccan Enterprises (BID ID -3504699)

Mahaveer Traders (BID ID -3504913)

KRISHNA CONSTRUCTION COMPANY (BID ID -3504320)

Aditya Construction (BID ID -3505183)

M/S BHERA RAM & SONS (BID ID -3504943)