Delhi

Financial Eval

Services

Miscellaneous Services

Maintenance and Operation of Street light, FOBs, Subways on PWD Roads under PWD EMD South East, New Delhi

Public Works Department

At Site | New Delhi, Delhi

Amount: ₹7.4 LCloses: 1 Jun 2026Closed

Timeline

Published25 May 2026
Closed1 Jun 2026
Technical Evaluation3 Jun 2026
Financial Evaluation3 Jun 2026
Award—

Bids

Percentage

4 Bids3 Jun 2026

#	Company	Amount	Rank	Status
1	Kalpana Enterprises L1₹4.0 LAccepted-Finance	₹4.0 L	L1	Accepted-Finance Selected
2	DEEPAK KUMAR GURJAR L2₹5.0 L+₹1.0 L (25.0%)Accepted-Finance 50 3 S F ARJUN NAGAR NEW DELHI 110029 \| SOUTH \| DELHI \| 110029	₹5.0 L+₹1.0 L (25.0%)	L2	Accepted-Finance Selected
3	Sharma Enterprises L3₹5.8 L+₹1.7 L (43.3%)Accepted-Finance 15 119 DAKHINPURI NEW DELHI 110062 \| SOUTH \| DELHI \| 110062	₹5.8 L+₹1.7 L (43.3%)	L3	Accepted-Finance Selected
4	RAMESH ELECTRIC WORKS L4₹6.0 L+₹1.9 L (48.0%)Accepted-Finance SHAHDARA \| DELHI \| 110095	₹6.0 L+₹1.9 L (48.0%)	L4	Accepted-Finance Selected

Tender Value

₹7.4 L

EMD Value

₹14,790

Closing Date

1 Jun 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

The Executive Engineer (E)

Address

The Executive Engineer (E) EMD South East, Thyagraj Stadium, New Delhi-110003

Work Description

(SH- Restoration of Electrical supply for the existing electrical pole due to fire at Barapullah Flyover and Bhishma Pitamah Flyover under PWD EMD South East Division).

Tender Information

Tender ID

2026_PWD_291982_1

Reference Number

33/EE(E)/EMD South East/PWD/2026-27

Tender Type

Open Tender

Product Category

Miscellaneous Services

Form of Contract

Works

Period of Work

30 days

Location

At Site

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

14 documents required · 14 mandatory

Fee/PreQual/Technical

RequiredEMD as per NIT (.pdf)

RequiredCopy of Receipt for Deposition of Original EMD as per NIT (.pdf)

RequiredCopy of Valid Electrical License as per NIT (.pdf)

RequiredCopy of Certificate of Registration for GST as per NIT (.pdf)

RequiredCopy of Valid PAN Card as per NIT (.pdf)

RequiredCopy of Affidavit on Non-Judicial Stamp Paper of Rs. 100 for debarment as per NIT (.pdf)

RequiredCopy of Enlistment order of Contractor as per NIT (.pdf)

RequiredCertificate of Work Experience as per NIT (.pdf)

RequiredScan Copy of Letter of Transmittal as per NIT (.pdf)

RequiredCopy of Financial Turnover Statement as per NIT (.pdf)

RequiredCopy of Loss and Profit statement as per NIT (.pdf)

RequiredCopy of Solvency or Net worth Certificate as per NIT (.pdf)

RequiredCopy of Affidavit on Non-Judicial Stamp Paper of Rs. 100 as per NIT (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹14,790

Important Dates

Last Activity

3 Jun 2026

Published

25 May 2026

Bid Opening

1 Jun 2026

Download Starts

25 May 2026

Download Ends

1 Jun 2026

Submission Starts

25 May 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (25 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, THD < 10% as per IEC 61000-3-2, P.F. ≥ 0.95, IP-66, IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg - 120 deg as per the application and the project requirement, suitable tiltable fitting, lifetime (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <5, Maximum power consumption should not be more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 to <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape, size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
1.01	150 watt	20	Nos.	3,166	₹63,320
2	Supplying and fixing of SMC Junction box having size 140 x 140 x 95 mm Single door, pole mounted weatherproof SMC junction box compete with terminal block suitable for 25 sq. mm conductor, DIN bar, SP MCB with suitable. M.S. clamp on the existing pole for light fixture etc as required	20	Nos.	425	₹8,500
3Supplying and fixing of XLPE insulated and PVC sheathed aluminium conductor armoured Power Cable of 1.1 KV grade of following size on wall surface as required.
3.01	3X10 Sq.mm	250	Mtrs.	333	₹83,250
4Supplying and laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.
4.01	4X25 Sq. mm.	150	Mtrs.	732	₹1,09,800
5Supplying and Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
5.01	4X25 Sq. mm.	100	Mtrs.	543	₹54,300
6laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.75 MB

Work Item Documents

tender.pdf

Tender Documents • 2.86 MB

BOQ_387553.xls

BOQ • 0.42 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Kalpana Enterprises

L1₹4.0 LAccepted-Finance

DEEPAK KUMAR GURJAR

L2₹5.0 L+₹1.0 L (25.0%)Accepted-Finance

50 3 S F ARJUN NAGAR NEW DELHI 110029 | SOUTH | DELHI | 110029

Sharma Enterprises

L3₹5.8 L+₹1.7 L (43.3%)Accepted-Finance

15 119 DAKHINPURI NEW DELHI 110062 | SOUTH | DELHI | 110062

RAMESH ELECTRIC WORKS

L4₹6.0 L+₹1.9 L (48.0%)Accepted-Finance

SHAHDARA | DELHI | 110095

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, THD < 10% as per IEC 61000-3-2, P.F. ≥ 0.95, IP-66, IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg - 120 deg as per the application and the project requirement, suitable tiltable fitting, lifetime (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <5, Maximum power consumption should not be more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 to <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape, size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
1.01	150 watt	20	Nos.	3,166	₹63,320
2	Supplying and fixing of SMC Junction box having size 140 x 140 x 95 mm Single door, pole mounted weatherproof SMC junction box compete with terminal block suitable for 25 sq. mm conductor, DIN bar, SP MCB with suitable. M.S. clamp on the existing pole for light fixture etc as required	20	Nos.	425	₹8,500
3Supplying and fixing of XLPE insulated and PVC sheathed aluminium conductor armoured Power Cable of 1.1 KV grade of following size on wall surface as required.
3.01	3X10 Sq.mm	250	Mtrs.	333	₹83,250
4Supplying and laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.
4.01	4X25 Sq. mm.	150	Mtrs.	732	₹1,09,800
5Supplying and Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
5.01	4X25 Sq. mm.	100	Mtrs.	543	₹54,300
6laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, THD < 10% as per IEC 61000-3-2, P.F. ≥ 0.95, IP-66, IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg - 120 deg as per the application and the project requirement, suitable tiltable fitting, lifetime (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <5, Maximum power consumption should not be more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 to <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape, size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

1.01

150 watt

Nos.

3,166

₹63,320

Supplying and fixing of SMC Junction box having size 140 x 140 x 95 mm Single door, pole mounted weatherproof SMC junction box compete with terminal block suitable for 25 sq. mm conductor, DIN bar, SP MCB with suitable. M.S. clamp on the existing pole for light fixture etc as required

Nos.

425

₹8,500

3Supplying and fixing of XLPE insulated and PVC sheathed aluminium conductor armoured Power Cable of 1.1 KV grade of following size on wall surface as required.

3.01

3X10 Sq.mm

250

Mtrs.

333

₹83,250

4Supplying and laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

4.01

4X25 Sq. mm.

150

Mtrs.

732

₹1,09,800

5Supplying and Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

5.01

4X25 Sq. mm.

100

Mtrs.

543

₹54,300

6laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.