BID DOCUMENTS FOR CONSTRUCTION WORK OF C.C.ROAD, COMPOUND WALL, R.C.C NP3 PIPE LINE AND LED STREET LIGHT POLE WITH ALL ACCESSORIES IN VARIOUS AREA AT ZALOD NAGARPALIKA UNDER: 15TH FINANCE SCHEME (UNTIED) GRANT.(PACKAGE:08).

1 ESTIMATE FOR PROVIDING AND LAYING OF 300MM DIA R.C.C. NP3 PIPE DRAIN AT Rs.

PUSHPA KUNJ SOCIETY BHAG 2 AT ZALOD.

2 ESTIMATE FOR CONSTRUCTION OF COMPOUND WALL AT NEAR PETROL PUMP AT Rs.

ZALOD ( WARD 5)

3 ESTIMATE FOR PROVIDING, SUPPLYING AND INSTALLATION OF SOLAR LED STREET Rs.

LIGHT AT MUVADA RAYNA FALIYA AT ZALOD.

4 ESTIMATE FOR PROVIDING AND LAYING OF 600 MM DIA R.C.C. NP3 PIPE DRAIN FROM Rs.

BEHIND SION NAGAR SOCIETY AT ZALOD.

5 ESTIMATE FOR PROVIDING, SUPPLYING & ERECTING OF LED STREET LIGHT POLE Rs.

WITH ALL ACCESSORIES AT INDRAPRASTH SOCIETY AT ZALOD (WARD 5).

6 ESTIMATE FOR PROVIDING, SUPPLYING & ERECTING OF LED STREET LIGHT POLE Rs.

WITH ALL ACCESSORIES FROM MADRESHA TO PADI MAHUDI AT ZALOD (WARD 6).

7 ESTIMATE FOR PROVIDING, SUPPLYING & ERECTING OF LED STREET LIGHT POLE Rs.

WITH ALL ACCESSORIES FROM HANUMAN MANDIR TO BAYPASS CHOKADI AT ZALOD

8 ESTIMATE FOR PROVIDING, SUPPLYING & ERECTING OF LED STREET LIGHT POLE Rs.

WITH ALL ACCESSORIES FROM LAKHA BHAI HOUSE TO BHALABHAI HOUSE AT ZALOD

9 ESTIMATE FOR CONSTRUCTION WORK OF C. C. ROAD AT RAJUBHAI'S HOUSE TO Rs.

MAHADEV TAMPLE AT ZALOD ( WARD 6 )

I/ We agree to carry out the above Work at ___________________________________% above/below the estimated rate.

(In Words) ______________________________________Percentage above/below the estimated Rate

Estimated Amount Put to Tender Rs.

% Above / Below _____________ %

Net Amount Rs. ________________

I/ We have read the conditions mentioned in this tender and agree to abide by the same

SECTION-7 BILL OF QUANTITIES-216

Seal & Signature of Contractor

President Chief Officer

Zalod Nagarpalika

Devgadh Baria Municipality, Zalod Nagarpalika

SECTION-7 BILL OF QUANTITIES-217

ZALOD MUNICIPALITY, ZALOD

ESTIMATE FOR PROVIDING AND LAYING OF 300MM DIA R.C.C. NP3 PIPE DRAIN AT PUSHPA KUNJ SOCIETY

BHAG 1 AT ZALOD.

Sr. Qty. Total Per Amount

1 249.00 Excavation for Foundation up to 1.5M depth including sorting of

Cmt. useful materials and dispoising of the excavated stuff up to 50 meter

lead in Loose or Soft soil.

2 100.00 Excavation for Foundation1.5M to 3.0 M depth including sorting of

Cmt. useful materials and dispoising of the excavated stuff up to 50 meter

lead in Loose or Soft soil.

3 166.00 Supplying and fixing reinforced concrete heavy duty non-pressure

Rmt. pipes with collars for culverts carring heavy trafficas per IS 458-

1991Specification including setting and joining the pipes in C:M 1:2

watering and laying (to level or slopes) of I.S. class NP3 of following

internal diameters. (iii) 300mm Dia.

4 337.00 Filling Availabale Excavated Earth (excluding Rock) in trenchess

Cmt. plinth, sides of foundation etc. in layers not exceding 20 cm in depth

consolidated each deposited layer by ramming and watering

5 16.00 Construction manhole with R.C.C. top slab in 1:2:4 mix (1 cement:2

Nos. coarse sand:4 graded stone aggregate 20mm nominal size)

foundation concrete 1 : 3 : 6 mix (1 cement : 3 coarse sand :6 brick

bats 40 + 50mm size) inside plastering 15mm thick with cement

mortar 1: 5 (1: cement :5 coarse sand ) finished with a floating coat

of neat cement and making channels in cement concrete 1:2:4 mix

91: cement :2 coarse sand : 4 stone aggregate 20 mm nominal size)

finished smooth complete including curing and festing (i) inside size

900mm x 1200 mm and 1.5 M deep including C.I cover with frame

size 560 mm diameter total weight of cover and frame to be not less

than 128 Kgs. ( wt. of cover 64 Kg. and wt. of frame 64 Kg. ) ( A) with

230 mm thick walls of brick masonry using brick having crushing

strength not less than 35 Kg. / Sq.cm. in cement mortat 1:5 ( 1:

cement :5 coarse sand ) (3) A type depth 0.90 meter for 300 mm

diameter sewer. 11042.74 No.

6 10.00 Providing and laying P.C.C. (1:3:6) mix (1 cement, 3 coarse sand,

Cmt. hand broken stone aggregate of 40mm nominal size) and curing

complete excluding the cost of formwork in (A) Foundation and

Plinth. 3114.05 Cmt.

SBD SECTION-7 BILL OF QUANTITIES-218

Cmt. Filling in plinth with sand under floors including watering ramming,

consolidating and dressing complete 419.82 Cmt.

Add :- 18% of GST, Rs.

Add :- 1% of Qaulity Controll Rs.

Add :- 2% of Contingency Charges Rs.

SBD SECTION-7 BILL OF QUANTITIES-219

ZALOD MUNICIPALITY, ZALOD

ESTIMATE FOR CONSTRUCTION OF COMPOUND WALL AT NEAR PETROL PUMP AT ZALOD ( WARD

PROPOSED COMPOUND WALL AT ZALOD

Item Qty. Description Total Unit Amount

1 161.00 Excavation for foundation up to 1:5 mt. Depth

Cmt. including sorting out and stacking of useful materials

and depositing of the excavated stuff up to 50 meter

lead. 125.86 Cmt.

2 29.00 Excavation for foundation from depth 1:5 mt. to 3.0 mt.

Cmt. Depth including sorting out and stacking of useful

materials and depositing of the excavated stuff up to

50 meter lead. (a) Loose or soft soil.

3 131.00 Filing available excavated earth (excluding rock) in

Cmt. trenches plinth sides of foundations etc. in layers not

exceeding 20cm. In depth consolidating each deposited

layer by remming and watering.

4 18.00 Providing and laying cement concrete 1:4:8 (1-Cement :

Cmt. 4-fine sand : 8-graded birck aggregates 40 mm nominal

size) and curing complete excluding cost of form work in

(a) Foundation and plinth. 2684.01 Cmt.

5 29.00 Providing and Laying controlled cement concrete M-250

Cmt. and curing complete, including the cost of formwork but

excluding the cost of reinforcement for reinforced

concrete work in Column footings.

6 5.50 Providing and laying controlled cement concrete M-250

Cmt. and curing complete including the cost of formwork But

Excluding the cost of reinforcement for reinforced

concrete work in Column upto Plinth Level having any

cross section area.

7 8.00 Providing and Laying controlled cement concrete M-250

Cmt. and curing complete, including the cost of formwork but

excluding the cost of reinforcement for reinforced

concrete work in Columns having any cross section area

upto floor two level.

8 8.00 Providing and laying controlled cement concrete M-250

Cmt. and curing complete including the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in Ground Beam having

SBD SECTION-7 any

BILL OFcross section

9 1.50 Providing and laying controlled cement concrete M-250

Cmt. and curing complete including the cost of formwork and

excluding the cost of reinforcement of reinforced

concrete work in COPING 6374.11 Cmt.

5220.00 Providing and supplying TMT Fe-500 bar steel

Kgs. reinforcment for R.C.C work including bending, binding

and placing in position etc. complete

11 38.00 Brick work using common burnt building bricks having

Cmt. crushing strngth not less than 35 Kg./cm2 in super

structure for Ground Floor in C.M. (1:6) (1 Cement,

fine sand) racking out joints curring etc. complete

directed by Engineer-in-charge. 4295.99 Cmt.

12 273.00 20 mm thick sand faced cement plaster on walls up to

Smt heinht 10 metres above ground laval cosisting of 12 mm

thick backing coat of C:M 1:3 (1-cement :3-sand) and

8mm thick finishing coat of C:M 1:1 (1-cement :1-sand)

13 273.00 Finishing wall with water proof exterior emulsion apex

Smt paint of on wall surfaces (two coats) to give an approved

brand and manufacture and of required slope evan

shade after throughly brushing the surface to remove all

dirt and remains of loose powered materials. etc

completed. 114.53 Smt.

Add 18.00 % GST

Add 2% For Contingecies Charges Rs.

Add 1% For Quality Control Rs.

SBD SECTION-7 BILL OF QUANTITIES-221

ZALOD MUNICIPALITY, ZALOD

ESTIMATE FOR PROVIDING, SUPPLYING AND INSTALLATION OF SOLAR LED STREET LIGHT AT

MUVADA RAYNA FALIYA AT ZALOD.

Sr. Quantity Discription Total Unit Amount

1 Supplying and erecting LED Solar street lights with High

power White LEDs wattage of 1Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name

engraved or embossed with 36 hours battery backup &

MPPT 24V,7.5 A charge controller with 12 hours

automatic switch on/off with wind speed resistance

28.00 (E) 36W,3000 lumens, IP-65, PV Module – 2x100W and

Nos. 6 mtr poles complete erected 36154.97 No.

Add :- 18% of GST, Rs.

Add :- 1% of Qaulity Controll Rs.

Add :- 2% of Contingency Charges Rs.

SBD SECTION-7 BILL OF QUANTITIES-222

ZALOD MUNICIPALITY, ZALOD

ESTIMATE FOR PROVIDING AND LAYING OF 600 MM DIA R.C.C. NP3 PIPE DRAIN FROM BEHIND

SION NAGAR SOCIETY AT ZALOD.

Sr. Qty. Total Per Amount

1 666.00 Excavation for Foundation up to 1.5M depth including

Cmt. sorting of useful materials and dispoising of the excavated

stuff up to 50 meter lead in Loose or Soft soil.

2 267.00 Excavation for Foundation1.5M to 3.0 M depth including

Cmt. sorting of useful materials and dispoising of the excavated

stuff up to 50 meter lead in Loose or Soft soil.

3 296.00 Supplying and fixing reinforced concrete heavy duty non-

Rmt. pressure pipes with collars for culverts carring heavy

trafficas per IS 458-1991Specification including setting and

joining the pipes in C:M 1:2 watering and laying (to level or

slopes) of I.S. class NP3 of following internal diameters. (iii)

4 826.50 Filling Availabale Excavated Earth (excluding Rock) in

Cmt. trenchess plinth, sides of foundation etc. in layers not

exceding 20 cm in depth consolidated each deposited layer

by ramming and watering

5 14.00 Construction manhole with R.C.C. top slab in 1:2:4 mix (1

Nos. cement:2 coarse sand:4 graded stone aggregate 20mm

nominal size) foundation concrete 1 : 3 : 6 mix (1 cement :

coarse sand :6 brick bats 40 + 50mm size) inside plastering

15mm thick with cement mortar 1: 5 (1: cement :5 coarse

sand ) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix 91: cement

:2 coarse sand : 4 stone aggregate 20 mm nominal size)

finished smooth complete including curing and festing (i)

inside size 900mm x 1200 mm and 1.5 M deep including C.I

cover with frame size 560 mm diameter total weight of cover

and frame to be not less than 128 Kgs. ( wt. of cover 64 Kg.

and wt. of frame 64 Kg. ) ( A) with 230 mm thick walls of

brick masonry using brick having crushing strength not less

than 35 Kg. / Sq.cm. in cement mortat 1:5 ( 1: cement :5

coarse sand ) (3) A type depth 0.90 meter for 600 mm

diameter sewer.

SBD SECTION-7 BILL OF QUANTITIES-224

6 30.00 Providing and laying P.C.C. (1:3:6) mix (1 cement, 3 coarse

Cmt. sand, 6 hand broken stone aggregate of 40mm nominal

size) and curing complete excluding the cost of formwork in

(A) Foundation and Plinth.

7 30.00 Filling in plinth with sand under floors including watering

Cmt ramming, consolidating and dressing complete

Add :- 18% of GST, Rs.

Add :- 1% of Qaulity Controll Rs.

Add :- 2% of Contingency Charges Rs.

SBD SECTION-7 BILL OF QUANTITIES-225

ZALOD MUNICIPALITY, ZALOD

ESTIMATE FOR PROVIDING, SUPPLYING & ERECTING OF LED STREET LIGHT POLE WITH ALL ACCESSORIES AT

INDRAPRASTH SOCIETY AT ZALOD .

Sr. Quantity Discription Total Unit Amount

1 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured

copper cable 1.1 KV grade to be erected as directed of

following size.

328.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

2 3.00 Supplying & erecting following spare parts for panel

Ea. mounting Switch Disconnector Fuse Units. Operational

Handle Assembly Complete for (i) 32/63/125 Amps.

3 3.00 Supplying and erecting triple pole & neutral 440V / 500V

Rmt. panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity.

4 3.00 Supplying & erecting following spare parts for panel

Ea. mounting Switch Disconnector Fuse Units. Neutral Link for

5 3.00 Supplying and erecting approved make 415V bakelite fuse

Ea. fittings for front connection / busbar type to accommodate

HRC fuse link, with spin - riveted brass contact, having

thermo plastic inflammable material & single piece

extruded brass box contact to lock with adequate cable

hole to accommodate aluminium conductors suitable for

(without HRC fuse). For 63 Amp.

6 3.00 Supplying and erecting Ammeter / Voltmeter selector

Ea. switch for 3 phase AC Supply 500 V on existing panel

board with necessary connections. 317.14 Ea.

7 3.00 Supplying and erecting approved make suitable panel

Ea. indicator LED type lamp, lens cover, complete erected with

necessary connections. 43.43 Ea.

8 3.00 Providing & erecting Spares For Air Circuit Breakers as

Ea. follows: (B) Auxiliary Contact Block for CN-CS 800 to

SBD SECTION-7 BILL OF QUANTITIES-226

9 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

205.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

205.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 50.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

Mtr. cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables.(e) 4 core 25 Sq. mm

12 3.00 Providing and erecting Approved make Four pole moulded

Ea. case circuit breaker having breaking capacity ICU of

KA. at 415 V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

16 G.M.S. housing. Cat.III. ICS=100% of ICU only.

13 Providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. Rating erected as directed.

3.00 (iii) 63 Amps. FP Cat.III 3040.10 Ea.

14 41.00 Providing and erecting Miniature circuit breaker single pole

Ea. 6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark. Cat III

15 5.00 Providing and erecting Annealed bare Copper wire 8 to

SBD SECTION-7 BILL OF QUANTITIES-227

16 41.00 Providing and erecting Pipe type earthing having

Ea. cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

17 Supplying & erecting funnel type earthing having earth

plate of following size burred in specifically prepared earth

pit 3 mtr. below ground with 40 kg. charcoal and salt with

alternate layers of charcoal & salt, 20mm. dia. G.I. pipe

with Funnel with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS 3043 with

necessary length of double Galvanised Iron / copper earth

wire No 6 SWG bolted with lug to the plate and covered in

12 mm dia. G.I. pipe 2.5 mtr long complete connected to

the nearest switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As per

drawing) with following specification.

3.00 (C) with 60 x 60 x 0.315 cms. Copper earth plate 7874.97 Ea.

18 3.00 For using salt and charcoal/coke as required for pipe type 171.70 Ea.

19 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured

cable multistrand /Solid Aluminium conductor for 1.1 KV.

To be laid on wall with necessary clamps or in existing

trench/pipe of following size of cables

615.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

20 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables

102.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

21 615.00 Providing & laying approved make Double walled

Mtr. corrugated pipes (DWC) of polyethylene (conforming to IS

14930 II) with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable. (C)

22 Supplying following size of Light duty “A” Class G.I. Pipe &

erecting as directed by Engineer-in-charge.

23 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

82.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

SBD SECTION-7 BILL OF QUANTITIES-228

24 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

6.00 (d) 2 to 4 core 16 Sq. mm 47.47 Ea.

25 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

6.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

26 41.00 Supplying and erecting approved make Octagonal pole

Ea. made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer

considering site requirement. (D) 6 Mtr. Long 70 mm Top

X 135 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M20 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole

27 Providing and erecting Street Light pole bracket comprising

main B Class MS pipe of 4.2 cm/require outside dia.

complete with suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm /80mm /

required size of pole top having sufficient fasteners for

fixing the brackets and having spread of 1.5.mtr. length

with 110 deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted with one

coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms.

41.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

SBD SECTION-7 BILL OF QUANTITIES-229

28 41.00 Supplying and erecting LED street light / Flood light fittings

Ea. with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K, Uniformity

ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates) (NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges

shown.) (A) Street Light (IP-65), Surge protection -4KV

integral and Light must have 440VAC line supply with over-

voltage protection. (ii) above 36 to 48 Watts. Cat III

29 3.00 Supplying & erecting approved make Digital time switch

Ea. having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with

necessary connection erected as directed

30 3.00 Supplying & erecting power contactor, AC3 duty for time

Ea. switch complete erected as per direction Cat III. (B) 2 pole

31 3.00 Supplying & erecting IP 55 grade following size section

Ea. pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side, with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per IP

55 test & followed by IS 2147 of 1962. (B) 75 X 60 X 45 cm

section pillar fabricated from 16 Gauge MS Sheet with

angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle.

SBD SECTION-7 BILL OF QUANTITIES-230

32 41.00 Supplying & erecting approved make SMC press moulded

Ea. composite FRP. loop-in, loop- out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E), DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box. (c)

150mm x 125mm x 100mm [deep].

33 615.00 Making trench in Hard Murrum / Tar Road of suitable width

Mtr. of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.

34 90.00 If additional machinery like hammer driller or JCB use

Mtr. [Add] 297.95 Mtr.

35 1.00 GEB Connection Charges 50500.00 Job.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QUANTITIES-231

ZALOD MUNICIPALITY, ZALOD

ESTIMATE FOR PROVIDING, SUPPLYING & ERECTING OF LED STREET LIGHT POLE WITH ALL ACCESSORIES

FROM MADRESHA TO PADI MAHUDI AT ZALOD (WARD 6).

Sr. Quantity Discription Total Unit Amount

1 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured

copper cable 1.1 KV grade to be erected as directed of

following size.

264.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

2 2.00 Supplying & erecting following spare parts for panel

Ea. mounting Switch Disconnector Fuse Units. Operational

Handle Assembly Complete for (i) 32/63/125 Amps.

3 2.00 Supplying and erecting triple pole & neutral 440V / 500V

Rmt. panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity.

4 2.00 Supplying & erecting following spare parts for panel

Ea. mounting Switch Disconnector Fuse Units. Neutral Link for

5 2.00 Supplying and erecting approved make 415V bakelite fuse

Ea. fittings for front connection / busbar type to accommodate

HRC fuse link, with spin - riveted brass contact, having

thermo plastic inflammable material & single piece

extruded brass box contact to lock with adequate cable

hole to accommodate aluminium conductors suitable for

(without HRC fuse). For 63 Amp.

6 2.00 Supplying and erecting Ammeter / Voltmeter selector

Ea. switch for 3 phase AC Supply 500 V on existing panel

board with necessary connections. 317.14 Ea.

7 2.00 Supplying and erecting approved make suitable panel

Ea. indicator LED type lamp, lens cover, complete erected with

necessary connections. 43.43 Ea.

8 2.00 Providing & erecting Spares For Air Circuit Breakers as

Ea. follows: (B) Auxiliary Contact Block for CN-CS 800 to

SBD SECTION-7 BILL OF QUANTITIES-232

9 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

165.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

165.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 50.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

Mtr. cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables.(e) 4 core 25 Sq. mm

12 2.00 Providing and erecting Approved make Four pole moulded

Ea. case circuit breaker having breaking capacity ICU of

KA. at 415 V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

16 G.M.S. housing. Cat.III. ICS=100% of ICU only.

13 Providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. Rating erected as directed.

2.00 (iii) 63 Amps. FP Cat.III 3040.10 Ea.

14 33.00 Providing and erecting Miniature circuit breaker single pole

Ea. 6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark. Cat III

15 5.00 Providing and erecting Annealed bare Copper wire 8 to

SBD SECTION-7 BILL OF QUANTITIES-233

16 33.00 Providing and erecting Pipe type earthing having

Ea. cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

17 Supplying & erecting funnel type earthing having earth

plate of following size burred in specifically prepared earth

pit 3 mtr. below ground with 40 kg. charcoal and salt with

alternate layers of charcoal & salt, 20mm. dia. G.I. pipe

with Funnel with a wire mesh for watering & bricks

masonry block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised Iron /

copper earth wire No 6 SWG bolted with lug to the plate

and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete

connected to the nearest switch gear with end socket as

per direction & duly tested by earth tester confirming to IS

(As per drawing) with following specification.

2.00 (C) with 60 x 60 x 0.315 cms. Copper earth plate 7874.97 Ea.

18 2.00 For using salt and charcoal/coke as required for pipe type 171.70 Ea.

19 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured

cable multistrand /Solid Aluminium conductor for 1.1 KV.

To be laid on wall with necessary clamps or in existing

trench/pipe of following size of cables

660.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

20 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables

82.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

21 660.00 Providing & laying approved make Double walled

Mtr. corrugated pipes (DWC) of polyethylene (conforming to IS

14930 II) with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable. (C)

22 Supplying following size of Light duty “A” Class G.I. Pipe &

erecting as directed by Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-234

23 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

66.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

24 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

4.00 (d) 2 to 4 core 16 Sq. mm 47.47 Ea.

25 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

4.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

26 33.00 Supplying and erecting approved make Octagonal pole

Ea. made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail

for MCB Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer

considering site requirement. (D) 6 Mtr. Long 70 mm Top

X 135 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M20 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole

27 Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm

/80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane & suitable

welded stays, reducer and with check nuts complete

painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos

33.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

SBD SECTION-7 BILL OF QUANTITIES-235

28 33.00 Supplying and erecting LED street light / Flood light fittings

Ea. with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K, Uniformity

ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates) (NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges

shown.) (A) Street Light (IP-65), Surge protection -4KV

integral and Light must have 440VAC line supply with over-

voltage protection. (ii) above 36 to 48 Watts. Cat III

29 2.00 Supplying & erecting approved make Digital time switch

Ea. having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with

necessary connection erected as directed

30 2.00 Supplying & erecting power contactor, AC3 duty for time

Ea. switch complete erected as per direction Cat III. (B) 2 pole

31 2.00 Supplying & erecting IP 55 grade following size section

Ea. pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side, with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per IP

55 test & followed by IS 2147 of 1962. (B) 75 X 60 X 45 cm

section pillar fabricated from 16 Gauge MS Sheet with

angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle.

SBD SECTION-7 BILL OF QUANTITIES-236

32 33.00 Supplying & erecting approved make SMC press moulded

Ea. composite FRP. loop-in, loop- out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E), DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box. (c)

150mm x 125mm x 100mm [deep].

33 660.00 Making trench in Hard Murrum / Tar Road of suitable width

Mtr. of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.

34 30.00 If additional machinery like hammer driller or JCB use

Mtr. [Add] 297.95 Mtr.

35 1.00 GEB Connection Charges 50500.00 Job.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QUANTITIES-237

ZALOD MUNICIPALITY, ZALOD

ESTIMATE FOR PROVIDING, SUPPLYING & ERECTING OF LED STREET LIGHT POLE WITH ALL ACCESSORIES

FROM HANUMAN MANDIR TO BAYPASS CHOKADI AT ZALOD (WARD 6).

Sr. Quantity Discription Total Unit Amount

1 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured

copper cable 1.1 KV grade to be erected as directed of

following size.

264.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

2 2.00 Supplying & erecting following spare parts for panel

Ea. mounting Switch Disconnector Fuse Units. Operational

Handle Assembly Complete for (i) 32/63/125 Amps.

3 2.00 Supplying and erecting triple pole & neutral 440V / 500V

Rmt. panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary connections.

(A) Suitable for 100 Amp. Capacity.

4 2.00 Supplying & erecting following spare parts for panel

Ea. mounting Switch Disconnector Fuse Units. Neutral Link for (i)

5 2.00 Supplying and erecting approved make 415V bakelite fuse

Ea. fittings for front connection / busbar type to accommodate

HRC fuse link, with spin - riveted brass contact, having

thermo plastic inflammable material & single piece extruded

brass box contact to lock with adequate cable hole to

accommodate aluminium conductors suitable for (without

HRC fuse). For 63 Amp.

6 2.00 Supplying and erecting Ammeter / Voltmeter selector switch

Ea. for 3 phase AC Supply 500 V on existing panel board with

necessary connections. 317.14 Ea.

7 2.00 Supplying and erecting approved make suitable panel

Ea. indicator LED type lamp, lens cover, complete erected with

necessary connections. 43.43 Ea.

8 2.00 Providing & erecting Spares For Air Circuit Breakers as

Ea. follows: (B) Auxiliary Contact Block for CN-CS 800 to 2500 &

SBD SECTION-7 BILL OF QUANTITIES-238

9 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if required.

165.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if required.

165.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 50.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

Mtr. cable multistrand Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables.(e) 4 core 25 Sq. mm

12 2.00 Providing and erecting Approved make Four pole moulded

Ea. case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. Cat.III. ICS=100% of ICU only. 6173.12 Ea.

13 Providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation

on 3 phase and neutral 415V,50Hz. having characteristic of

quick action & tripping with all advance feature & do not

incorporate any electronic component for following Max.

Rating erected as directed.

2.00 (iii) 63 Amps. FP Cat.III 3040.10 Ea.

14 33.00 Providing and erecting Miniature circuit breaker single pole

Ea. 6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark. Cat III

15 5.00 Providing and erecting Annealed bare Copper wire 8 to

16 33.00 Providing and erecting Pipe type earthing having

Ea. cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

SBD SECTION-7 BILL OF QUANTITIES-239

17 Supplying & erecting funnel type earthing having earth plate

of following size burred in specifically prepared earth pit

mtr. below ground with 40 kg. charcoal and salt with

alternate layers of charcoal & salt, 20mm. dia. G.I. pipe with

Funnel with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS 3043 with

necessary length of double Galvanised Iron / copper earth

wire No 6 SWG bolted with lug to the plate and covered in

mm dia. G.I. pipe 2.5 mtr long complete connected to the

nearest switch gear with end socket as per direction & duly

tested by earth tester confirming to IS (As per drawing) with

following specification.

2.00 (C) with 60 x 60 x 0.315 cms. Copper earth plate 7874.97 Ea.

18 2.00 For using salt and charcoal/coke as required for pipe type 171.70 Ea.

19 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured

cable multistrand /Solid Aluminium conductor for 1.1 KV. To

be laid on wall with necessary clamps or in existing

trench/pipe of following size of cables

660.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

20 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables

82.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

21 660.00 Providing & laying approved make Double walled corrugated

Mtr. pipes (DWC) of polyethylene (conforming to IS 14930 II) with

necessary connecting accessories of same material at

required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable. (C) 50 mm Dia

22 Supplying following size of Light duty “A” Class G.I. Pipe &

erecting as directed by Engineer-in-charge.

23 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following

size of cables.

66.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

SBD SECTION-7 BILL OF QUANTITIES-240

24 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following

size of cables.

4.00 (d) 2 to 4 core 16 Sq. mm 47.47 Ea.

25 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following

size of cables.

4.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

26 33.00 Supplying and erecting approved make Octagonal pole

Ea. made from HR sheet steel. The pole should be made as per

IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for cable

termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering

site requirement. (D) 6 Mtr. Long 70 mm Top X 135 mm

bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I.

J Bolts .Approx Pole weight 59 kgs.

27 Providing and erecting Street Light pole bracket comprising

main B Class MS pipe of 4.2 cm/require outside dia.

complete with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm /80mm / required

size of pole top having sufficient fasteners for fixing the

brackets and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays, reducer and

with check nuts complete painted with one coat of Red oxide

/ PU base primer and two coats of Aluminium / PU paint.

paint with following nos of arms.

33.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

SBD SECTION-7 BILL OF QUANTITIES-241

28 33.00 Supplying and erecting LED street light / Flood light fittings

Ea. with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K, Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt. LED driver efficiency >

85 %.( fittings required LM-79 & LM-80 certificates) (NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Street Light (IP-

65), Surge protection -4KV integral and Light must have

440VAC line supply with over-voltage protection. (ii) above

36 to 48 Watts. Cat III

29 2.00 Supplying & erecting approved make Digital time switch

Ea. having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating contacts

Minimum switching setup time 1 minimum & LCD display.

Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure &

transparent cover erected as required with necessary

connection erected as directed

30 2.00 Supplying & erecting power contactor, AC3 duty for time

Ea. switch complete erected as per direction Cat III. (B) 2 pole

31 2.00 Supplying & erecting IP 55 grade following size section pillar

Ea. fabricated from joint less M.S. Sheet with angle iron legs

made from jointless M.S. Angle with cable clamps to be

buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side, with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as per IP

test & followed by IS 2147 of 1962. (B) 75 X 60 X 45 cm

section pillar fabricated from 16 Gauge MS Sheet with angle

iron legs 45 cm long made from 35 X 35 X 5 mm thick MS

SBD SECTION-7 BILL OF QUANTITIES-242

32 33.00 Supplying & erecting approved make SMC press moulded

Ea. composite FRP. loop-in, loop- out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E), DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box. (c) 150mm x

125mm x 100mm [deep].

33 660.00 Making trench in Hard Murrum / Tar Road of suitable width of

Mtr. 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.

34 30.00 If additional machinery like hammer driller or JCB use [Add]

Mtr. 297.95 Mtr.

35 1.00 GEB Connection Charges 50500.00 Job.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QUANTITIES-243

ZALOD MUNICIPALITY, ZALOD

ESTIMATE FOR PROVIDING, SUPPLYING & ERECTING OF LED STREET LIGHT POLE WITH ALL ACCESSORIES

FROM LAKHA BHAI HOUSE TO BHALABHAI HOUSE AT ZALOD (WARD 6).

Sr. Quantity Discription Total Unit Amount

1 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured

copper cable 1.1 KV grade to be erected as directed of

following size.

264.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

2 2.00 Supplying & erecting following spare parts for panel mounting

Ea. Switch Disconnector Fuse Units. Operational Handle Assembly

Complete for (i) 32/63/125 Amps.

3 2.00 Supplying and erecting triple pole & neutral 440V / 500V panel

Rmt. mounting Copper Busbars with four equal Nos. of electrolyte

bus having current density not more than 1.6 Amp. / sq.mm

(Rated current / cross section area) duly wrapped with colour

insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports

/insulators, main cable socket to each bar, erected in existing

cubical panel with necessary connections. (A) Suitable for

4 2.00 Supplying & erecting following spare parts for panel mounting

Ea. Switch Disconnector Fuse Units. Neutral Link for (i) 32/63/125

Amps. 137.36 Ea.

5 2.00 Supplying and erecting approved make 415V bakelite fuse

Ea. fittings for front connection / busbar type to accommodate HRC

fuse link, with spin - riveted brass contact, having thermo

plastic inflammable material & single piece extruded brass box

contact to lock with adequate cable hole to accommodate

aluminium conductors suitable for (without HRC fuse). For

6 2.00 Supplying and erecting Ammeter / Voltmeter selector switch

Ea. for 3 phase AC Supply 500 V on existing panel board with

necessary connections. 317.14 Ea.

7 2.00 Supplying and erecting approved make suitable panel indicator

Ea. LED type lamp, lens cover, complete erected with necessary

connections. 43.43 Ea.

8 2.00 Providing & erecting Spares For Air Circuit Breakers as

Ea. follows: (B) Auxiliary Contact Block for CN-CS 800 to 2500 &

SBD SECTION-7 BILL OF QUANTITIES-244

9 Mains with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size

of copper lugs, nuts and bolts if required.

165.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size

of copper lugs, nuts and bolts if required.

165.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 50.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

Mtr. cable multistrand Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables.(e) 4 core 25 Sq. mm

12 2.00 Providing and erecting Approved make Four pole moulded

Ea. case circuit breaker having breaking capacity ICU of 25 KA. at

415 V,having normal current rating up to 25 A to 100A. with

Fixed thermal & magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S. housing.

Cat.III. ICS=100% of ICU only.

13 Providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

phase and neutral 415V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not incorporate

any electronic component for following Max. Rating erected as

2.00 (iii) 63 Amps. FP Cat.III 3040.10 Ea.

14 33.00 Providing and erecting Miniature circuit breaker single pole 6A

Ea. to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark. Cat III

15 5.00 Providing and erecting Annealed bare Copper wire 8 to

SBD SECTION-7 BILL OF QUANTITIES-245

16 33.00 Providing and erecting Pipe type earthing having 150 cms.long

Ea. and 2.5 cms. dia. galvanised iron pipe with coupling and buch

buried in specially prepared earth pit complete with necessary

8 SWG earth wire.

17 Supplying & erecting funnel type earthing having earth plate of

following size burred in specifically prepared earth pit 3 mtr.

below ground with 40 kg. charcoal and salt with alternate

layers of charcoal & salt, 20mm. dia. G.I. pipe with Funnel with

a wire mesh for watering & bricks masonry block, C.I. Cover

complete as per para 7.3 of IS 3043 with necessary length of

double Galvanised Iron / copper earth wire No 6 SWG bolted

with lug to the plate and covered in 12 mm dia. G.I. pipe

mtr long complete connected to the nearest switch gear with

end socket as per direction & duly tested by earth tester

confirming to IS (As per drawing) with following specification.

2.00 (C) with 60 x 60 x 0.315 cms. Copper earth plate 7874.97 Ea.

18 2.00 For using salt and charcoal/coke as required for pipe type 171.70 Ea.

19 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured

cable multistrand /Solid Aluminium conductor for 1.1 KV. To be

laid on wall with necessary clamps or in existing trench/pipe of

following size of cables

660.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

20 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of

following size of cables

82.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

21 660.00 Providing & laying approved make Double walled corrugated

Mtr. pipes (DWC) of polyethylene (conforming to IS 14930 II) with

necessary connecting accessories of same material at

required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable. (C) 50 mm Dia

22 Supplying following size of Light duty “A” Class G.I. Pipe &

erecting as directed by Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-246

23 Providing and fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of

66.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

24 Providing and fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of

4.00 (d) 2 to 4 core 16 Sq. mm 47.47 Ea.

25 Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of

4.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

26 33.00 Supplying and erecting approved make Octagonal pole made

Ea. from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable

termination to be erected With Suitable foundation (Included)

as per details given by manufacturer considering site

requirement. (D) 6 Mtr. Long 70 mm Top X 135 mm bottom

dia, 3 mm thickness with 200mmX200mmX12mm base plate,

4-M20 Bolts and 600mm long with necessary G.I. J Bolts

.Approx Pole weight 59 kgs.

27 Providing and erecting Street Light pole bracket comprising

main B Class MS pipe of 4.2 cm/require outside dia. complete

with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm /80mm / required size

of pole top having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with 110 deg.with vertical

plane & suitable welded stays, reducer and with check nuts

complete painted with one coat of Red oxide / PU base primer

and two coats of Aluminium / PU paint. paint with following nos

33.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

SBD SECTION-7 BILL OF QUANTITIES-247

28 33.00 Supplying and erecting LED street light / Flood light fittings with

Ea. High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt. LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-65), Surge

protection -4KV integral and Light must have 440VAC line

supply with over-voltage protection. (ii) above 36 to 48 Watts.

29 2.00 Supplying & erecting approved make Digital time switch having

Ea. lithium cell 6 years operative and operate battery backup

channel day clock with 14 memory programme, suitable to

operate on 240V + 5%, 16A with, floating contacts Minimum

switching setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure &

transparent cover erected as required with necessary

connection erected as directed

30 2.00 Supplying & erecting power contactor, AC3 duty for time switch

Ea. complete erected as per direction Cat III. (B) 2 pole 250V

Amp. 1883.65 Ea

31 2.00 Supplying & erecting IP 55 grade following size section pillar

Ea. fabricated from joint less M.S. Sheet with angle iron legs made

from jointless M.S. Angle with cable clamps to be buried in

ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double door

internally supported on both side, with internal and outside

looking arrangement with look and keys in duplicate 35 x 35 x

5 mm M.S. Angle of Two Nos. one is welded and other with nut

and bolt for erecting Bakelite sheet. Painting the Section Pillar

inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water leakage

proof & tested as per IP 55 test & followed by IS 2147 of

(B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge

MS Sheet with angle iron legs 45 cm long made from 35 X

X 5 mm thick MS angle.

SBD SECTION-7 BILL OF QUANTITIES-248

32 33.00 Supplying & erecting approved make SMC press moulded

Ea. composite FRP. loop-in, loop- out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E), DIN rail

for mounting mob & hinged doors as per requirement having

locking arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable clamps& earth

bolt of following size of box. (c) 150mm x 125mm x 100mm

33 660.00 Making trench in Hard Murrum / Tar Road of suitable width of

Mtr. 90 cm or required depth for laying any size of cable or locating

the fault all over the run and back filling the same and making

the surface as normal ground.

34 30.00 If additional machinery like hammer driller or JCB use [Add]

Mtr. 297.95 Mtr.

35 1.00 GEB Connection Charges 50500.00 Job.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QUANTITIES-249

ZALOD MUNICIPALITY, ZALOD

NAME OF WORK :- ESTIMATE FOR CONSTRUCTION WORK OF C. C. ROAD AT KALUBHAI'S HOUSE TO

LAXMANBHAI'S HOUSE AT ZALOD ( WARD 6 )

Qty. Description Unit Amount

1 57.00 Demolition and disposal of unserviceable materials with

Cmt. all lead and lift.(i) Lime concrete.

2 113.50 Box Cutting the Road Surface to proper slope and

Cmt. camber for making a base for road work including

removing the excavated stuff and dipositing to road slope

as directed all lead and lift etc. complete upto 50 mt. Lead

3 57.00 Providing and laying compacted 100 mm thick B.T.

Cmt. Metalling (45 to 63 mm size) using Stone screening

mm of 0.16 Cmt./10 Smt. and 0.08 Cmt./10 Smt., Stone

Dust including spreading in uniform layer, watering and

consolidation by vibratory roller achived the desired

density, as per clause.404 of M.O.R.T. & H. specification

4 57.00 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt. 4 Coarse sand, 8 Crushed stone agreegate 40 mm

nominal) and curing complete excluding cost of formwork

in foundation and plinth.

5 85.50 Providing and laying cement concrete work M200 and

Cmt. curing complete excludng the cost of form work an

reinforcement of reinforced concrete work.

6 567.00 Labour charges for concreting with vacume dewatering

Smt. Technique (Trimix or equivalent type) including loading,

unloading, carting, companing complete with "C"

channelas as per requirement and labour charges on

directed by Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-250

7 7.00 Renovation of manhole by increasing the height at top

Nos. including cost of excavation, refitting of C. I. manhole

frame and cover curing etc. complete incl. all carting and

providing of materials which is required for the purpose

(except manhole frame and cover) For all type manhole

by providing RCC 1:2:4 Partition walls with required

reinforcement 25 cm thick and circular opening with

500mm clear dia and 0.40 mt. av. ht.

8 17.10 Supplying promoulded bituminous joint filler. (I) 12mm

Cmt thick 553.79 Cmt

Add :- 18% GST Rs.

Add :- 2% of Contingency Charges Rs.

Add :- 1% of Qaulity Controll Rs.

SBD SECTION-7 BILL OF QUANTITIES-251