PROVN OF PARKING SHED AT RAQAS V INS DEGA VISAKHAPATNAM

Amount

Schedule 'A' Part -I: B/R WORKS

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil

Excavating over areas nexc 1.50 m deep and getting out complete all as specified and as directed.

Returning, filling in, including, spreading, leveling, watering and well ramming in layers n.exc 25cm.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point.

M&L for PCC (1:3:6) type C-2 using 40mm graded machine crushed stone aggregate as in foundation.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with fly ash modular size bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M&I. hard core.: of broken stone or boulders of gunge not exc 63mm but n exc 40mm deposited spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete.

M&L for 100 mm thick cement concrete type B-1, 1:2:4 (20 mm graged aggregate) complete all as specified and as directed.

M&L. for sand filling under floors or in foundations incl watering and consolidation complete al as specified and as directed.

M&L. for machine pressed precast concrete interlocking paver block any shape and site conforming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and no pigment complete all as specified and as directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L preparation of new plastered surface and three coats of white wash complete all as specified and as directed

M&L for providing precast cement concrete type A1 1:1.5:3 (20 mm graded aggregate) in landings cover slabs, (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in mortar CM 1:4 complete with joints to match complete all as specified and as directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hopping for columns for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed.

Demolition of concrete in ground floors and pavings nexc 15cm thickness(below or above ground level) complete all as specified and as directed.

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed

Excavation in post holes not exiting 0.5 cum, getting out returning, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete in soil loose soil.

M&L for steel work in tubular trusses incl special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L. for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barred iron doors , ladders , framed balusters , walks . railings ,. framework of water tanks . wind ties and similar work conforming to Fe-290 (Gde-165) complete all as specified and as directed.

M&I for plates( Plain or chequered ) channels , square cut or notched (ordinary and counter sunk) forming holes , without any attachment of Fe-290 (Gde-165) complete all as specified and as directed

M&L for two coats of synthetic enamel paint on new steel surface exc 10 cm width or girth on 01 coat of primer (Red oxide Zinc chrome) incl preparation of new surfaces complete.

Schedule 'A' Part -II: E/M WORKS

M & L For Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through PVC Conduit surface type Modular Type Pressed Metal Flush Box made out of lmm thick GI Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light point controlled by One Switch complete all as specified.

S & F Modular switch 1 way 6A, 1 module single pole complete all as specified and directed by Engr-in-charge.

Supply and fixing ceiling rose surface bake lite. 65 x 30 mm with 3 terminals complete all as specified and directed by Enqr-in-charge.

S & F LED light fittings, 4 feet long of minimum 1800/2000 lumens(18/20 Watt) of cool white/warm white with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 08 Way, IP-42 protection with 100 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for haying MCB's, complete all as specified.

Supply and fixing of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 04 Way, lP-42 protection with 100 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for haying MCB's complete all as specified.

Supply and fixing in repair of MCB 32 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series„ complete all as specified

Supply and fixing of MCB 6 to 32 Amp, 240 Volt, SP, breaking 'capacity 10 KA 'C' series, complete all as specified

M&L for sub main wiring with 2 run of 4 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4 Sq mm drawn through PVC surface/concealed conduit of 25 mm dia, complete all as specified and directed by Engg-in-Charge. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduit shall be measured as one length & Cutting of chases/walls if needed and making good the disturbed surface shall be deemed to be included in the quoted rate.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core, complete all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60x60cmx 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for laying of cable complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified

Removing excavated surplus soils material not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

Material and labour for natural river sand as cushioning of cables, including spreading and punning down complete all as specified and directed by Engineer in charge. Note : punned thickness shall be measured for payment purpose

Supply and laying in trenches bricks common burnt clay building brick , sub class B designation 75 complete all as specified & directed

Supply and laying GI tubing Iight grade 40mm in trenches complete all as specified & directed by Emir in charge

SWATHI CONSTRUCTIONS

pavan putra enterprises

K.ADITYA ENGINEERING CONTRACTORS

NAVEEN INFRASTRUCTURES

PRASAD INFRAS

V R K CONSTRUCTIONS

M/s KAMADHENU ENGINEERING CONSTRUCTIONS

M/s Sai Venkata Durga Constructions

M/s SIRI CONSTRUCTIONS

prasad constructions

SAI SRINIVAS CONSTRUCTIONS