Annual Maintenance Contract for residential and non residential buildings at hydel colony WYC HE Project Bhudkalan for a period of one year

Amount

Earth work in excavation (HSR Ref. 6.6)

Dismantling CC plain (HSR Ref. 8.6 d)

Dismantling RCC (HSR Ref. 8.6 e)

Dismantling Brick Work (HSR Ref. 8.5 b)

Dismantling floor (HSR Ref. 8.25)

Scraping of Colour / White wash (HSR Ref. 8.32 a)

Cement concrete 1:1 ½:3 (HSR Ref. 10.42)

Cement Conc 1:2:4 (HSR Ref. 10.41)

Cement Conc 1:3:6 (HSR Ref. 10.40)

brick work 1:6 in foundation (HSR Ref. 11.2)

Brick Work 1:4 in superstructure (HSR Ref. 11.9)

Supply WC indian type, orissa,630mm (HSR Ref. 30.2 B ii)

Supply WC Europeon type (HSR Ref. 30.4 i)

12mm Cement Plaster 1:4 (HSR Ref. 15.5)

15mm Cement Plaster 1:4 (HSR Ref. 15.10)

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. (HSR Ref. 16.60)

Painting two coats with synthetic enamel Paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (HSR Ref. 16.5)

White wash Two Coats (HSR Ref. 16.47)

Supplying and fixing hydraulic door Closer, I.S.I mark, with necessary Screws, etc., complete- (HSR Ref. 17.82 c)

Reinforcement for RCC work (HSR Ref. 18.22)

supply glass panes including special metal sash putty of approved make 4 mm thick (HSR Ref. 18.30 b)

C.P Shower with revolving joint. (HSR Ref. 30.66 c)

Providing and fixing in position 15 mm i/d C.P brass bib cocks long body of best quality (as required by engineer in charge) (HSR Ref. 30.75 a)

Providing & fixing in position 15 mm i/d C.P brass bib Cocks short body of best quality (as required by Engineer-in-charge) (HSR Ref. 30.75 b)

Factory-manufactured wire gauze door and windows shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash, etc, (non coniferous timber other teak, conforming to I.S. specification no. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide locak rail 200 mm wide bottom rail and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fitting other than specified above, but including labour for fixing the same in position)- (styles and rails of windows shutter shall be 75 mm wide) 35 mm thick (HSR Ref. 17.92 ii)

Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in positon includeing iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)-commercial veneering with vertical grains or corss bands and face veneer on both sides commercial facing with laminated core and lipped edges:- 35mm thick (HSR Ref. 17.93 a ii)

P&F vertified tiles of size 600x 600mm of approved make (1st Quality) of reputed manufacturer like NITCO, Kazaria, Somani, Orient, Johnsons & RAK etc. (HSR Ref. 14.89)

P&F vertified tiles of size 600x 600mm of approved make in skirting/ dado (1st Quality) of reputed manufacturer like NITCO, Kazaria, Somani, Orient, Johnsons & RAK etc. (HSR Ref. 14.90)

11.43 cm thick brick wall laid in cement mortar 1:4 without reinforcement in super structure. (HSR Ref. 11.48 a)

Providing & fixing AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRRON Mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall or chromium plated brass clamps with C.P brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (a) Indian Make (i) 600 mm x 450 mm (ii) 550 mm x 400 mm (HSR Ref. 30.71 a i)

Wrought iron and mild steel work (HSR Ref. 18.12)

Supply and fixing if interlocking paver blocks 80mm thick (HSR Ref. 10.159)

Providing ceramic glazed wall tiles confirming to IS 15622 of approved make in all colour shades including pointing in white cement with pigment of matching shade complete a) Size of ceramic glazed tiles 200x300mm (HSR Ref. 14.92 a)

Providing ceramic glazed wall tiles confirming to IS 15622 of approved make in all colour shades including pointing in white cement with pigment of matching shade complete Size of ceramic glazed tiles b) 300 x 450mm (HSR Ref. 14.92 b)

Finishing walls with exteriopr decorative cement based paints such as snowcem,Robbiacem etc. on new work, two coats to give an even shade (HSR Ref. 16.61)

Providing & fixing AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawlslugs embedded in walls with C.P brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (a) 25mm dia, C. P Brass adjustable (HSR Ref. 30.68 a ii)

Providing &fixing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etcs. (a) With C.P brass brackets and guard rail (i)530 mm x 125 mm (HSR Ref. 30.70 a ii)

Dismentaling Brick work,Tile masonary or tile lining and tile terracing in cement (HSR Ref. 8.5 b)

Terracing consisting of tiles 22.86 cm*11.43*3.81 cm, laid over 87.50mm mud filling,on a layer of 25 mm mud plaster and an other layer of mud mortar for lying the tiles over a polythene film of 100 micron (0.1 mm) thickness with 25 mm thick layer of fine sand ,above and below the polythene film,laid on top of R.C.C slab,including grouting with cement sand mortar 1:3 and top surface to be left clean (HSR Ref. 13.13)

Centering and shuttering for flat surface such as suspended floors , roofs , landings , chhajjas , shelves , etc. inclination not exceeding 25 degree with horizontal. (HSR Ref. 9.1)

centering and shuttering for faces of walls, partition , retaining walls , well steining and the like (vertical or battering) including attached pilasters, buttresses etc.when curved. (HSR Ref. 9.5)

Top khurra 0.6m X 0.6m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16 (HSR Ref. 13.50)

kail wood chowkats of doors and windows including iron hold fasts , corner straps, screws, bolts for hold fasts, etc. complete fixed in position (HSR Ref. 17.11)

kail wood door and window shutters, panelled, glazed , or glazed and panelled including iron hinges , screws, chocks/cleats and stops etc., complete fixed in position (excluding the cost of tower bolts and handles, but including the labour for fixing the same) (a) 40 mm thick(12 mm thick kail wood panel) (HSR Ref. 17.25 a)

wire gauze kail wood door and window shutters, without springs ,housed in chowkets including chocks, iron hinges ,screws, etc., complete fixed in position(excluding the cost of tower bolts and handles, but including the labour for fixing the same) (a) 35 mm thick (HSR Ref. 17.26 a)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in fascias parapets and other thin vertical sections, not covered by item nos. 10.82, 10.86 , to 10.88 not exceeding 10 cm thickness excluding steel reinforcement and including centring and shuttering , laid in position complete in all respects. (HSR Ref. 10.89)

applying pink primer or aluminium priming coat on wood work including preparation of surface , knotting and stopping etc. (HSR Ref. 16.2)

PROVIDING AND FIXING IN POSITION BEST QUALITY STAINLESS STEEL SINKS WITH COMPLETE FITTINGS AS FULLY DESCRIBED IN ITEM NO. 30.51 ABOVE : 600 mm x 450 mm x 200 mm (HSR Ref. 30.53 i)

Providing Aluminium Door Handles 150mm (NS)

Setting Right of aluminium Door Single Leaf (NS)

Preparation of Surface with birla white/Jk putty (NS)

Setting Right of aluminium window leaf (NS)

Setting Right of floor spring for Aluminum Door(NS)

Providing Ci manholes cover size 450×450(NS)

Hiring of JCb with fuel and operator (NS)

Hiring of tractor trolly with fuel and operator (NS)

supply & Fixing new aluminum partition having vertical aluminum glazing at 1.2 mt interval with lamintaed board/ 5mm thick glass of size 2.5"*1.5" (NS)

supply and Fixing new aluminum door (NS)

Supply of G.I pipe 1/2" NB 'B' Class (Prakash-surya) (NS)

Supply of G.I pipe 3/4" NB 'B' Class (Prakash-surya) (NS)

Supply of G.I pipe 1" NB 'B' Class (Prakash-surya) (NS)

Supply of G.I pipe 1¼" NB 'B' Class (Prakash-surya) (NS)

Supply of G.I pipe 1½" NB 'B' Class (Prakash-surya) (NS)

Sewer Lines Pipe 1½' (NS)

Hinge (Kabje) 3" (NS)

Hinge (Kabje) 4" (NS)

Grinding of floor (NS)

Providing Iron door with chokhat (NS)

Providing moulding for door chokhat (NS)

Angle Holder/Button holder (NS)

Switch 5A (NS)

Socket 5A (NS)

Board sheet 9" * 11" (NS)

Board sheet 5" * 10" (NS)

Board sheet 8" * 5" (NS)

Wooden box 8 " * 10" (NS)

Wooden box 4" * 9" (NS)

Wooden box 7" * 4" (NS)

Block 3*3" (NS)

Batten nails (NS)

Steel screw (NS)

Wall gitti (NS)

batten 3/4" (NS)

Door bell (NS)

Door bell switch (NS)

Connector 5A (NS)

Tape roll (NS)

Copper Wire 1.5 mm (NS)

ceiling rose (NS)

copper Wire 2.5 mm (NS)

MCBDP (NS)

Power Socket 15A (NS)

Power Switch 15A (NS)

Providing gola 75 X 75 mm in cement concrete 1:2:4 (1cement: 2 coarse sand : 4 stone aggregate 10 mm gauge) including finishing with cement mortar 1:3 ( 1 cement : 3 fine sand) as per standard design (NS)

Rolling shutter repair and maintenance (NS)

Aluminum Door stopper (NS)

Aluminum elecroloplated sliding bolts 300*16mm (NS)

Aluminum elecroloplated sliding bolts 200*16mm (NS)

Aluminum electroplated tower bolt 200*12 (NS)

Double action door floor spring ISI mark (NS)

wash baisn size 550*450 mm cera (Avery) (NS)

5 mm thick float glasss plain (NS)

Pillar cock Ess Ess trend series (NS)

urinal flat back size 635*395*420mm (NS)

Providing angle clock 15mm (NS)

Providing CP Floor jalli (NS)

Providing Float valve 15mm for cistern (NS)

Providing float valve 25mm for water tank complete set (NS)

Providing ball for float valve (NS)

Providing syphon handle for cistern (NS)

Providing PVC syphon complete set (NS)

Providing PVC waste pipe for sink/wash basin (NS)

Providing spindle complete (NS)

Supply of HDPE water storage tank 3 layer (capacity 500 to 1000 ltr) (NS)

Supply of HDPE tank cover (NS)

GI Elbow ½" (NS)

GI Elbow 3/4" (NS)

GI Elbow 1" (NS)

Elbow 1¼" (NS)

GI Elbow 2" (NS)

GI Socket ½" (NS)

GI Socket 3/4" (NS)

GI Socket 1" (NS)

PVC Socket 2" (NS)

PVC Socket 3" (NS)

PVC Socket 4" (NS)

PVC connection 1½' (NS)

PVC connection 2' (NS)

PVC connection 3' (NS)

Fasner 4" (NS)

GI TEE ½" (NS)

GI TEE 3/4" (NS)

GI TEE 1" (NS)

GI TEE 2" (NS)

GI TEE 3" (NS)

GI nipple ½" (NS)

GI nipple 1" (NS)

GI nipple 1½" (NS)

GI nipple 2" (NS)

GI pipe ¾" (NS)

Union 1" (NS)

PVC Pipe 2½" (NS)

PVC pipe 3" (NS)

PVC pipe 4" (NS)

D joint of sewerage pipe (NS)

Mixture of ISI marked Jaguar Maked (NS)

CP jet in EWC complete Set (NS)

Seat Cover (NS)

P-Trap (NS)

Supply of CI pipe 6" dia ISI marked (per length of 3 mtr) (NS)

Supply of PVC for bend 3" ISI marked (NS)

Supply of PVC for bend 4" ISI marked (NS)

Ball valve 1/2" (NS)

Ball valve 1" (NS)

Sink Jali (NS)

Fiber Sheet (NS)

Curtain rings (NS)

Curtain rod (Latto) (NS)

Bracket wall to wall (NS)

Curtain rod (NS)

Supply of Cistern complete set cera (NS)

Supply of Cement bags ACC (NS)

Supply of sand (bajri) (NS)

Attending the Electrician (Electrical work) of Residential and Non Residential buildings at hydel colony Bhudkalan (one no. Electrician & one No. Helper)

Attending work of Arboriculture and beautification of Lawns, Gardens & herbal park of Rest House and offices of Hydel Project, Bhudkalan Yamunanagar (3 nos. of mali)

Attending the work of plumber (plumbing work) of residential and non residential buildings at Hydel Colony Bhudkalan (1 no. Plumber)

Attending the work of carpenter (wooden work repair) in residential and non residential buildings at Hydel colony, Bhudkalan (1 no. Carpenter )

Attending the civil works (mason work) of Residential and Non Residential buildings at Hydel Colony Bhudkalan (1 no. Mason )

Supply of 6 mm ply board (NS)

Supply of 12 mm ply board (NS)

Supply of 18 mm ply board (NS)

Single side door wooden chowkhat (NS)

Double door wooden chowkhat (NS)

S P S ENTERPRISES

aashirwad engineering