Loading
Loading…
Loading…
Tender Value
₹42.5 L
EMD Value
₹43,000
Closing Date
1 Oct 2026, 6:00 pm4d left
Executive Engineer, R and B Division, Himatnagar
Construction of Intensive Cattle Development Programme Sub Center At Ratanpur, Ta:- Idar, Dist.:- Sabarkantha
345777
06 of 2026-27
Open
Civil Works - Buildings
Works
Sabarkantha
7 documents required · 7 mandatory
₹1,500
Executive Engineer, R and B Division, Himatnagar
₹43,000
17 Sept 2026
17 Sept 2026
17 Sept 2026
1 Oct 2026
17 Sept 2026
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
1 Excavation for foundation up to 1.5 m depth 152.00 157.07 Cmt
including sorting out and stacking of useful
materials and disposing off the excavated stuff
up to 50 Meter lead. (B) Dense or Hard soil
2 Excavation for foundation for depth from 1.5 m 35.00 287.46 Cmt
to 3.0 m including sorting out and stacking of
use ful materials and disposing off the excavated
stuff up to 50 Meter lead. (C) Hard Murrum
3 Providing and laying controlled cement concrete 22.00 3975.77 Cmt
M-150 and curing complete including the cost of
form work and reinforcement for reinforced
concrete work in : (a) Foundations, footings
Bases of columns and the like and Mass
4 Providing and laying cement concrete 1 :4 :8 (1 21.00 2925.71 Cmt
cement : 4 coarse sand : 8 crushed stone
aggregate 40 mm nominal size) and curing
complete excluding cost of form work in (A)
Foundation and plinth
5 Providing and laying controlled cement concrete 20.00 4658.50 Cmt
M-250 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
foundation footings, base of columns and mass
6 Providing and laying controlled cement concrete 4.00 7677.37 Cmt
M-250 in Column and curing complete including
the cost of form work but excluding the cost of
reinforcement for reinforced concrete work up to
plinth level.
7 Providing and laying controlled cement concrete 8.00 6341.19 Cmt
M-250 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
Plinth BEAMS
8 Brick work using common Brunt clay building 40.00 4214.32 Cmt
bricks having crushing strength not less than
Kg./Sq.cm.. In foundation and plinth in cement
mortar 1:6 (1cement : 6 fine sand) (C)
Conventional.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
9 Filling available excavated Earth (Excluding 164.00 136.91 Cmt
Rock ) in trench plinth side of foundation . in
layer not excluding 20 cm in depth consolidation
each deposited layer by ramming and watering
etc. complete
10 Filling foundation and plinth with murrum or 144.00 294.38 Cmt
including ramming watering and consolidating
etc. complete
11 Filling in plinth with sand under floors including 13.00 481.80 Cmt
watering ramming, consolidating and dressing
etc. complete
12 Carring out plinth treatment to post construction 63.00 86.81 Smt
/ existing structure by spraying chemical solution
for termite control treatment including labour
and material consistment with I.S.I specification.
Using Chlordene and Chiorpurfiles 20 EC. As
Per 6131_paret-II Consentration Weight one
percent is recommended i.e one litre 20 EC
chemical emulsion with 19 liter give 1 %
concrentration inclusive of one litre chemical
emulsion appication at the rate of 5 Litre
chemical / Sqm of surface is recommended as
13 Providing and laying controlled cement concrete 7.00 7625.35 Cmt
M-200 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
Columns, pillars posts and struts G.FLOOR
14 Providing and laying cement concrete work 1:2:4 2.00 7124.70 Cmt
(1-Cement : 2- Coarse sand:4-graded stone
aggregates 20mm nominal size) and curing
complete excluding cost of form work and
reinforcement for reinforced concrete work in (D)
Columns F.F.
15 Providing and laying controlled cement concrete 7.00 6289.17 Cmt
M-200 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
BEAMS Ground Floor
16 Providing and laying controlled cement concrete 10.00 6618.74 Cmt
M-200 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
SLABS for Ground Floor
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
17 Providing and laying controlled cement concrete 2.00 7730.11 Cmt
M-200 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
Lintels Ground Floor
18 Providing and laying controlled cement concrete 1.00 6598.54 Cmt
M-200 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
CHHAJJAS Ground Floor
19 Providing TMT Bar FE 500D reinforcement for 9935.00 77.28 Kg
R.C.C. work including bending, binding and
placing in position complete upto floor two level
20 Brick work using common Brunt clay building 59.00 4495.98 Cmt
bricks having crushing strength not less than
Kg./Sq.cm.. In super structure above plinth level
upto floor two level in cement mortar 1:6
(1cement : 6 fine sand) (b) Conventional
{Ground FLoor }
21 Brick work using common Brunt clay building 12.00 4538.41 Cmt
bricks having crushing strength not less than
Kg./Sq.cm.. In super structure above plinth level
upto floor two level in cement mortar 1:6
(1cement : 6 fine sand) (b) Conventional (F.F)
22 Providing 10 mm. Thick cement plaster in single 90.00 164.76 Smt
coat for plastering on ceiling and soffits of stairs
upto floor two level and finished even and
smooth in : (I) Cement mortar 1:3 (1 cement :
sand) Ground Floor
23 Providing 15 mm thick cement plaster in single 363.00 165.30 Smt
coat on fair side brick/ concrete walls for interior
plastering and finished even and smooth in
cement mortar 1:4 (1 cement : 4 sand) Ground
24 Providing 15 mm thick cement plaster in single 54.00 189.25 Smt
coat mala on fair side brick/ concrete walls for
interior plastering and finished even and smooth
in cement mortar 1:4 (1 cement : 4 sand) F.F
25 20 mm. thick sand faced gutka cement plaster 311.00 321.09 Smt
on wall up to height 10 Meters above ground
level consisting of 12mm thick backing coat of
C.M. 1 : 3 (1 cement : 3 sand) and 8 mm thick
finishing coat of C.M. 1 : 1 (1 cement : 1 sand)
etc. complete
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
26 Applying two coats of Birla or Asian acrylic lappy 315.00 166.11 Smt
(putty) and two coats of primer with Wall painting
(three coats) with plastic emulsion paint of
approved brand and manufacture & of required
shade on wall surfaces to give an even shade
including thoroughly brushing the surface free
from mortar dropping & other foreign matter &
also including preparing the surface even & sand
papered smooth.
27 Finishing wall with 100% acrylic emulsion 503.00 73.75 Smt
weather proof exterior emulsion paint on wall
surface (two coats) to give an required shape
even shade after thoroughly brushing the
surface to remove all dirt, and remains of loose
powdered materials etc complete
28 Providing and Fixing MAIN DOOR 35 mm thick 5.00 5167.43 Smt
flush door double shutter with 75 x 35 mm Teak
wood beading finished with pattern laminated on
both side in situ laminated work including indian
teak wood frame 100 x 50 mm size including
cms long Stainless Steel handle on both shutter.
With concealded lock two tower bolt & aldrops.
29 Providing and Fixing 35 mm thick flush door with 5.00 5020.21 Smt
75 x 35 mm Teak wood beading finished with
pattern laminated on both side in situ laminated
work including 60 cms long Stainless Steel
handle on both shutter. With concealded lock
two tower bolt & aldrops etc complete as
30 100 X 50 MM FRP FRAME WITH 28 MM THICK 2.00 2377.76 Smt
FRP DEPRESSED PANEL SHUTTER: Providing
and fixing FRP FRAME size 100 x 50 mm &
mm thick FRP depress pannel shutter having
extra reinfocement on sides and edges in Gel
coat finish. The core of the shutter & frame is to
be filled up with injected fire retardant grade
plyurethane foam done in situ along with
embedded wooden pices for stiffening & also for
taking hinges and fixtures. The whole FRP frame
and shutter is to be water proof, weather proof,
termite proof and resistance to mild acid/alkalis
Rates are to be inclusive of S.S. hinges with
necessary screws and alluminium fixtures and
fastening with fastener & sleeve. Product should
have 3 years perfomance guarantee & company
have 9001-2000 certificate.
(For Toilet Purpose)
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
31 Providing and fixing window having extruded 9.00 2140.33 Smt
aluminum Colour anodized section frame main
outer size 127 mm x 38.10 mm x 1.35 mm @ wt.
1.384 kg / m, horizontal Four track member size
/m, vertical member of size 122.20 mm x
mm x 1.50 mm @ 1.398kg/mt with sliding
shutters of horizontal member size 40 mm x
mm x 1.29 mm @ 0.456 kg/mt, vertical member
of size 40 mm x 18 mm x 1.29 mm@ 0.456kg /
mt with 5 mm thick transparent bronze colour
tinted float glass with powder coated aluminum
fittings and fixtures and transparent silicon
sealant glass fixing to frame as per details etc
complete for window.
32 Providing and fixing standared extruded of 1.00 1175.55 Smt
alluminium section of size 63 mm x 38.10 mm x
1.2 mm @ Wt. 0.643 Kg / mt with colour
anodized alluminium frame for ventilation with
5mm thick frosted glass as details etc complete
for Ventilation
33 Providing and fixing M.S.Grills of required 2166.00 111.45 Kg
pattern with M.S.Flats at required spacings and
frame alround,square or round bar,with round
headed bolts and nuts or by screws plain grill
including approval quality of primer and two coat
of oil painting etc. complete
34 Providing and laying 16 mm thick machine 28.00 2259.77 Smt
polished granite stone for window & ventilation
Sill & jamps in single piece including moulding
the edge including laying, joining, rubbing and
polishing etc. complete.
35 Providing and laying Machine Polished, Machine 4.00 2119.69 Smt
Cutt, Free Edge Granite stone slab 16 mm thick
for stair steps and riser as per design incl.
rounded Moulding front edge in trade of steps
laid on 20 mm thick cement mortar 1:6 (1 -
cement : 6 coarse sand) and skiring on 10 mm
thick cement Plaster 1:3 (1 -cement : 3 coarse
sand) jointed with grey cement slurry including
rubbing and polishing etc. complete
36 P & L 24" x 24" vitrified 8 mm thick tile flooring 46.00 1311.18 Smt
over 20 mm (average) base of cement mortar
1:6 ( 1 cement: 6 coarse sand) on new surface
or fixing on existing flooring by adhesive material
including dismentaling of existing flooring and
jointed with color cement slurry ncluding finised
with flush pointing & cleaning the surface etc.
complete for light shade
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
37 Providing and laying Vitrified tiles 8 to 10 mm 5.00 1195.02 Smt
thick , 24'' x 24'' in skrting risers of steps and
dedo on 10mm thick cement plaster 1:3 (1-
cement : 3-coarse sand) and jointed with white
cement slurry
38 Providing and laying Ceramic tiles 6mm thick in 5.00 994.36 Smt
flooring treads of steps and landing laid on a bed
of 12mm thick cement mortar 1:3 (1-cement : 3-
coarse sand ) finishing with flush pointing in
white cement.
39 Providing & Laying Coloure glazed tiles 300 mm 104.00 1487.88 Smt
x 600 mm x 8mm in skirting, risers of steps and
dedo on 10 mm thick cement plaster 1:3 (1
Cement : 3 coarse sand) and jointed white
cement slurry
40 Providing and laying broken chine mosaic 64.00 1079.64 Smt
flooring for terrace on C.C. 1:2:4 { 1 cement :
coarse sand : 4 10 to 12 mm gritt} average
mm thick for slope using 12 mm to 20 mm
broken pieces of glazed tiles to be laid over
cement mortar 1:3 to plain or slope and to be
tempered to bring mortar crème out upto surface
using white cement including rounding of
junctions and extending them upto 15 cm along
the wall, clearing with water and oxalic acid etc.
as directed.
41 Pro. & Fix. wash down water closet (European 1.00 2641.88 No
w. c .pan) with integral" p " or " s " trap and PVC
fushing cistern with fittings etc comp incl plastic
sheet cover including jointing trap with pipe in
cm 1:1 and connecting cistern with closet & Jet
spray heavy duty with S.S. Braided hose 60 cm
long (a ) Vitreous china in white or color
42 Providing and fixing wash basin of approved 1.00 1666.16 No
brand like Cera, Hindware, Parryware or equi.
with single hole for pillar tap with C.I. or M.S.
brackets painted white including cutting holes
and making good the same but including fittings.
of 32 mm dia (A)Vitreous Chine (ii) Flat back
wash basin 550 mm x 400 mm size ( in colour as
directed of)
43 Providing and fixing cast iron (Spun) Nahni trap 4.00 634.16 No
of the following nominal diameter of self cleaning
design with C.I. screaed down or higned grating
including cost of cutting and making good the
walls and floor 100mm inlet and 50mm outlet.(C)
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
44 Providing and fixing S.W. Gully trap with C.I. 4.00 1246.91 No
Grating brick masonary chamber and water tight
C.I. Cover with frame of 300 mm. X 300 size
(inside) with standard weight (I) Square mouth
traps (C) 150 mm. X 100 mm size p or R type
45 Providing And Fixing Urinal of approved quality 1.00 1619.12 No
including connection with trap and with integral
longitudinal flush pipe A) Squatting pattern
46 Providing and fixing 600mm. x 450mm. 1.00 859.40 No
bevelled edge MIRROR of superior glass
mounted on 6mm. thick A.C. sheet or plywood
sheet and fixed to wooden plugs with C.P. brass
screws and washers.
47 Providing and fixing C.P. brass TOWEL 1.00 616.42 No
RAIL complete with C.P.Brass brackets fixed to
wooden plugs with C.P.Brass screws. 600mm. x
20 mm. size.
48 Providing laying and jointing in true line and level 25.00 148.11 Rmt
40 mm dia. U.P.V.C. Pipe (SCH - 40) line
including fittings as apprroved by Engineer In
charge. Pipe shall be fixed on the wall with the
help of clamp at every two meter C/C or shall be
concealed as directed including necessary
fittings etc. including testing of pipe and joints
and fixing the same with adhesive solvent,
including cost of all materials
49 Providing laying and jointing in true line and level 18.00 91.83 Rmt
25 mm dia. U.P.V.C. Pipe (SCH - 40) line
including fittings make or equivalent as
apprroved by Engineer In charge. Pipe shall be
fixed on the wall with the help of clamp at every
two meter C/C or shall be concealed as directed
including necessary fittings etc. including testing
of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
50 Providing laying and jointing in true line and level 13.00 72.64 Rmt
15 mm dia. U.P.V.C. Pipe (SCH - 40) line
including fittings make or equivalent as
apprroved by Engineer In charge. Pipe shall be
fixed on the wall with the help of clamp at every
two meter C/C or shall be concealed as directed
including necessary fittings etc. including testing
of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
51 Providing and fixing gun metal check or non 2.00 186.82 No
return full way wheel valve.15 mm dia.
52 Providing and fixing gun metal check or non 2.00 420.63 No
return full way wheel valve.25 mm dia.
53 Providing and fixing gun metal check or non 3.00 663.42 No
return full way wheel valve.40 mm dia.
54 Providing and fixing chromium plated brass half 1.00 263.77 No
turn flush cock of approved quality including
fixing in pipe line etc complete. (ii)
25 mm dia.
55 Providing and fixing CP brass Quarter turn pillar 1.00 308.72 No
tap, capstan head screw down high pressure
with screw, shanks and back ndts (A) 15 mm
56 Providing and fixing Screw down Quarter turn 4.00 186.82 No
bib taps of following size (B) Brass chromium
plated screw down Bib tap (I) 15 mm dia
57 Providing and fixing screw down stop tap (A) 15 2.00 205.82 No
58 Constructing brick masonary chamber for under 2.00 2932.92 No
ground C.I. Inspection chamber and bends with
bricks having crushing strength not less than
Kg/cm2 in cm. 1:5 C.I. Cover with frame (light
duty) 455 mm. X 610 mm. Internal dimensions,
total weight of cover with frame to be not less
than 38 Kgs. weight of cover 23 Kg. and wt. of
frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm. size ) foundation concrete
1:5:10 inside plaster 15 mm. thick with cement
mortar 1:3 finished smooth with a floating coat of
neat cement on walls & bed concrete etc.
complete. (I) inside dimensions, 455 mm. x
mm. And 450 mm. Deep for single pipe line.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
59 Constructing brick masonary chamber for under 2.00 3660.75 No
ground C.I. Inspection chamber and bends with
bricks having crushing strength not less than
Kg/cm2 in cm. 1:5 C.I. Cover with frame (light
duty) 455 mm. X 610 mm. Internal dimensions,
total weight of cover with frame to be not less
than 38 Kgs. weight of cover 23 Kg. and wt. of
frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm. size ) foundation concrete
1:5:10 inside plaster 15 mm. thick with cement
mortar 1:3 finished smooth with a floating coat of
neat cement on walls & bed concrete etc.
complete. (ii) Inside dimension 500 mm x
mm and 450 mm deep for pipe line with one or
two inlets
60 Providing and laying and jointing in true line and 45.00 876.11 Rmt
level 110 mm dia U.P.V.C SWR TYPE B pipe
confirming to IS13592-1992 with one end plain
and other end socketed with rubbering and fitting
conforming to ISI 14735-1999 of approved make
for drainge system pipe line, pipe shall be jointed
with each other with rubber lubricant pipe shall
be fixedon using of PVC clamps of the size
mm dia.x 149 mm lengthx145 mm high at every
2000 mm center to center or shall be concealed
in walls as directed incuding nexessary fittings
such as bends, shoes etc. incuding testing of
pipes and joints and jointed with adhesive
solvent cement inluding cost of all matrials.
{Finolex, Supreme, Prince or equivalent brand}
61 Providing and laying and jointing in true line and 42.00 834.38 Rmt
level 160 mm dia U.P.V.C SWR TYPE B pipe
confirming to IS13592-1992 with one end plain
and other end socketed with rubbering and fitting
conforming to ISI 14735-1999 of approved make
for drainge system pipe line, pipe shall be jointed
with each other with rubber lubricant pipe shall
be fixedon using of PVC clamps of the size
mm dia.x 210 mm lengthx196 mm high at every
2000 mm center to center or shall be concealed
in walls as directed incuding nexessary fittings
such as bends, shoes etc. incuding testing of
pipes and joints and jointed with adhesive
solvent cement inluding cost of all matrials.
{Finolex, Supreme, Prince or equivalent brand}
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
62 Providing septic tank of size 4.95 x 1.98 x 2.00 1.00 77674.54 No
mt. depth including necessary excavation and
23cm thick brick masonary in CM 1:6 and
horizontal portion with bottom concrete 1:5:10
and 40 mm thick IPS and 15 mm thick inside
plaster 12cm thick CC 1:2:4 slab with two
manhole cover including connection with sockpit
and other sanitary lines as per detailed drawing.
63 Providing and constructing sock pit of 2.46 mt. 1.00 38915.30 No
dia out side and 4.00 mt. depth with honey
combed masonary 6.50 mt. from bottom and
0.60 mt. brick masonary in C.M. 1:6 top with
RCC slab cover of C.C. 1:2:4 vent pipe 1.80 mt.
long 75 mm dia & C.I. cover and cowl vent etc.
64 Provinding & fixing acrelic name plate of 4.00 404.00 No
required size on Room with Lettering etc.
complete including all labour and material etc
65 Making 10 X 10 mm Groove in plaster in 93.00 15.15 Rmt
perfect line and level & plumb including the cost
of scaffolding etc complete.
66 Providing and fixing pre-cast Rubber 104.00 706.92 Smt
Dye/steel Dye inter locking concrete block
60mm thick with grade of concrete M300
pnumatic compressed / Vibrated mechanically
and as per approved design confirming to IS
15658: 2006 including 35mm sand layer for
levelling and filling the joint with sand in proper
line and level as per guidlines of IRC : SP 63-
2018 etc. completed
67 Providing erecting and fixing double coated 1000.00 3.94 Lit.
Syntex or equivalent PVC. (ISI) mark water tank
of reqd capacity each with all necessary fittings
& connection etc. comp on terrace.
68 Supplying & installing of Dry Chemical Powder 2.00 2020.00 No
type 5 Kg. Capacity fire extinguisher as per I.S.
2171 ISI. Mark with necessary fittings etc.
69 Providing Carben doxide type fire extinguisher 2.00 5050.00 No
4.5Kg. Capacity with I.S.I. Mark and test
certificate of explosive deprtment of Nagpur.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
70 Providing and fixing 1.5mm FinRoof UPVC 17.00 3354.11 Smt
roofing sheet installed heavy Ms section
bending fabricated shade complete erection to
installation with necessary fitting with oil paint
on steel surface and including PCC with 1:3:6 &
RCC 1:2:4 including all labour charges as per
instruction of engineer in charge etc complete.
71 Providing and laying ordinary cement concrete 4.00 10219.39 Cmt
1:2:4 (1 Cement : 2 coarse sand : 4 graded
stone aggregates 20mm nominal size) for
R.C.C. Lintel including finishing smooth with
curing etc. complete including the cost of
formwork but excluding the cost of
reinforcement.
72 Clearing and grubbing road land including 0.02 84256.50 Hect.
uprooting rank vegetation grass bushes, shrubs,
sapling and trees girth up to 300 mm removal of
stumps of trees cut earlier and disposal of
unserviceable materials (C) By manual means in
area of light jungle
73 Box cutting the road surface to proper slope and 26.00 109.04 Cmt
camber for making a base for road work
including removing the excavated stuff and
depositing on the road side slope as directed.
74 Providing & Laying 150 mm thickness of B.T 15.00 1508.66 Cmt
M.C Metal 40 mm to 63 mm size in one layer
including using 20% stone screening (0.16 Cmt
Grit) & 0.08 Cmt stone dust including spreading
watering consolidation and rolling etc complete.
At site of work including loading unloading and
filling the boxes etc complete.
75 Providing and laying cement concrete 16.00 4100.60 Cmt
1:3:6 (1 Cement : 3 coarse sand :6 Crushed
stone aggregates 20 mm nominal size) and
curing complete excluding cost of form work in
(A) Wall Caps / Copping.
76 Providing and casting in-situ ordinary cement 25.00 5339.53 Cmt
concrete M- 250 for average 75 mm thick
wearing coat laid as directed including tamping
vibrating, finishing, curing and filling in joints with
bitumen complete.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
77 Compaction and finishing of cement concrete 96.00 55.55 Smt
road by tremix process. providing extra labor
charges for tremix (Vacuum dewatering service)
Process on cement concrete road surface by
using vacuum dewatering pump floater surface
vibrator including making groves and rough
finish to surface as per instruction including
leveling etc. Complete.
78 Providing & Laying Rain Water Junction 3.00 7555.65 No
Chamber of Clear Internal Size 0.60 x 0.60 x
0.75m with excavation of size 1.36x1.36 m &
0.13m thick C.C. 1:2:4 Bed Concrete Including
brick masonary 0.23 thick wall in CM 1:6 of
0.75m height with 15mm thick Cement Plaster
inside & outside (1:4), 1.06x1.06 C.C.1:2:4 Top
slab of thickness 0.13m with TMT steel and
455mm x 610mm cast iron manhole cover with
frame weight not less than 35 kg as per directed
by Engineer-in-charge.
79 Providing & Laying Filter chamber of Brick work 1.00 24951.44 No
0.23 Thick in C:M 1:6 of Clear Internal Size
mx 1.20 m x 1.20m and excavation dimension of
2.80mx 1.96x1.35m including C.C M200 Bed
concrete of 0.15m thick and RCC M200 Top slab
of thickness 0.15m with TMT steel, Including
15mm (1:4) thick cement plaster inside & outside
with Cement Slurry & top cover with frame of
minimum weight of 35 kg, Including filling filter
material of 200mm thick each layer of 25-40mm,
10-20mm of BT metal and Sand as per directed
by Engineer-in-charge.
80 Providing & Laying Water Harvesting Pit of Clear 1.00 30217.26 No
Size 2.00 mt x 2.00mt x 4.00 mt. For water
logging with excavation in any strata upto four
meter depth, Brick work 0.23 Thick in C:M 1:6 of
Clear Internal Size 2.00 mx 2.00 m x 1.20m With
15mm thick C:M 1:4 Plaster, filling the pit with
B.T.Metal 40 mm in 0.60 mt. depth with 25-
40mm kapachi, 0.30 mt. depth and 2.0 mt. depth
with coarse sand in layers including making
P.V.C. line for water inlet etc. as directed with
250mm dia bore 15 mt. depth and 150mm dia
P.V.C. pipe of 10 Kg.f/Cm2 casing with gravel
packing or as directed.
81 Providing and laying cement concrete 1:3:6 ( 1 1.00 3095.25 Cmt
Cement : 3 course sand : 6 Crushed stone
agg.of 20 mm nominal size) and curing
completeexcluding cost of form work in (a)
Foundation and plinth
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
82 Providing and laying controlled cement concrete 5.00 9305.13 Cmt
M-200 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
Vertical Walls for G. Floor
83 Providing and laying white glazed tiles 6mm 24.00 982.03 Smt
thick in skrting risers of steps and dedo on
10mm thick cement plaster 1:3 (1-cement : 3-
coarse sand) and jointed with white cement
84 Providing and fixing C.I. Manhole cover 0.60 M. 2.00 958.17 No
x 0.45M. size having weight not less than 35 Kg.
85 Drilling 200 / 215 mm dia bore hole in 120.00 266.64 Mtr.
overburden strata by DTH. rig up to required
depth including fixing of 175 / 180 dia MS ERW /
PVC casing pipe & future drilling of 165 mm dia,
bore hole in hard (trap etc) strata ny DTH drilling
method up to total depth of 300 meters including
measuring the yield by V notch and flushing of
bore etc complete as directed. A) From 0 to
meters depth.
86 Drilling of 200/215MM Dia bore hole in over 30.00 418.14 Mtr.
burden rocky or loose collapsible/boulder strata
& lowering of 175/200mm dia UPVC / PVC /
ERW casing pipe above 12mtr upto 40 Mtr depth
by DTH Rig etc. complete.
87 Providing 600 CFM / 150 PSI capacity air 1.00 22427.05 No
compressor up to availability of sand free
discharge (Minimum 6.0 Hours)
88 Supply of reducer made from 6 mm thick plate 1.00 1884.27 No
(M.S.) for ERW pipe of size (ii) 200 mm dia. x
250 mm dia. x 600 mm length.
89 Supply of M.S. Bore clamps with 3 holes on 1.00 1643.99 Pair
either side with nuts and bolts of standard make
and suitable size (g) 750 mm x 75 mm x 16 mm
flat to 200 mm dia. pipe.
90 Supply of Bore Plug having 100 mm height 1.00 782.57 No
made from M.S. plate with 3 holes at equal
distance on circumference for nut-bolts type,
locking arrangement with nut-bolts & lock nuts of
standard make complete. (B) from 5 mm thick
M.S. plate (for top also) (ii) suitable for 200 mm
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
91 Supply of M.S. Bail Plug having length of 0.45 1.00 851.04 No
mtr from medium class pipe as per I.S.S.
suitable for (d) 200 mm diameter pipe etc.
6 mm, including stacking and filling etc.
93 Charges for uptron make Electrologger (with 1.00 12120.00 No
carting) of pilot bore hole etc. complete.
94 Charges for Geo Hydrological ground water 1.00 14428.86 No
investigation including water sample chemical
analysis etc. complete.
95 Supplying submersible pump set suitable for 1.00 31815.00 No
bore of 150 mm. dia. or more having three
phase motor capacity not more than 7.5 H.P.
with following capacity (a) (12 stage) 280 to
LPM discharge at 90 to 104 mtrs. head
respectively suitable for 50mm dia. delivery pipe
96 Providing and erecting PVC corrugated flexible 120.00 25.25 Mtr.
conduit with required numbers of coupling, PVC
bushes, Check-nuts etc. complete of following
sizes. (3) 32 mm diameter
97 Lowering of submersible motor pump set 1.00 3030.00 No
complete with required. Nos. and size of casing
pipes erected by means of proper chain pulley
block & pipe wrenches after checking of threads
of each pipe with coupling to take the load of the
pump set and pipe assembly filled up with water.
(b) Above 60 Mtr and up to 120 Mtr
98 Supplying and erecting approved make motor 1.00 9342.50 No
control cubical panel (Direct - on - line) made
from 16 G. CRCA sheet duly epoxy powder
painted inside and outside with hinged doors and
locking, arrangement consisting of suitable size
of ON-OFF isolator (AC - 3/23 duty) main fuses,
single phasing preventer, indicating lamps for R -
Y - B phases, overload relay, automatic water
level controller, Ammeter, Voltmeter each with
socket crimped, main contactor & overload relay,
start - stop push buttons, to be erected on angle
iron frame grouted on wall as directed. The
isolator, overload relay & contactors will be of L
& T, Siemens or BCH make only. (a) DOL up to
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
99 Supplying and erecting XLPE (IS: 7098) (I)-88 120.00 131.30 Mtr.
ISI unarmoured copper cable 1.1 KV grade to be
erected as directed of following size. (E) 3 core
100 Providing laying and jointing in true line and level 100.00 195.67 Rmt
50 mm dia. U.P.V.C. Pipe (SCH - 40 ) including
fittings or equivalent make or as approved by
Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two meter
C/C or shall be concelled as directed including
necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive
solvent, including cost of all materials.
101 Supplying and fixing reinforced concrete heavy 7.50 2605.56 Rmt
duty non-pressure pipes with collars for culverts
carrying heavy traffic as per IS 458-1991
specifications including setting the pipes in C.M.
1:2 watering and laying (to level or slopes) of
class NP3 of following internal daimeters. (iii)
750mm dia.
102 Point wiring for Light / Bell with 2-1.5 sq.mm & 21.00 582.77 Pts
earth wire of 1.5 sq.mm (Green) both are of ISI
marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length , in
below type of pipe erected with 6A Modular type
switch / bell push & accessories and earth
continuity of following type, erected on PVC /
Metallic/Wooden box, single mounting base
frame covered with textured/metallic/white front
plate modules erected on / in wall / ceiling as
per pipe erected, with necessary Lamp
holder/ceiling rose / H.D.Connector as
directed.(f) with medium class Rigid PVC pipe
and accessories erected concealed in
wall/ceiling complete.Cat-III
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
103 Point wiring for FAN with 2-1.5 sq.mm & earth 12.00 809.01 Pts
wire of 1.5 sq.mm (Green) both are of .ISI
marked 1.1 KV Grade FRLS PVC insulated
multi strand copper wires up to 10 mtr length, in
below type of pipe erected with 6A Modular
type switch and hum free EME step type
electronic fan regulator mounted and
accessories with earth continuity of following
type erected on PVC / Metallic/Wooden box,
single mounting base frame covered with
textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe erected.
with necessary ceiling rose / H.D.Connector as
directed..(f) with medium class Rigid PVC pipe
and accessories erected concealed in
wall/ceiling complete.Cat-III
104 Point wiring for Individual Plug with & earth wire 5.00 612.06 Pts
of 1.5 sq.mm (Green) both are of ISI marked
KV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type
of pipe erected complete with Modular type
switch & 5 pin Plug erected on PVC /
Metallic/Wooden box covered with appropriate
front plate modules erected on / in wall / ceiling
as per pipe erected with following type of
accessories. [I] For 6A Plug and 6 a switch with
2-1.5 sq.mm Cu. Wire from nearby
switchboard/mcb db board (f) with medium class
Rigid PVC pipe and accessories erected
concealed in wall/ceiling completeCat-III
105 Point wiring for on board Looped Plug with 6A 9.00 309.06 Pts
Modular type switch & 5 pin socket erected on
PVC / Metallic/Wooden box, single mounting
base frame covered with textured / metallic/white
front plate modules erected on / in wall / ceiling
with following type accessories.Cat-III
106 Providing following type of Modular Type 1.00 160.59 Nos.
Accessories mounted with PVC /
metallic/Wooden box, single mounting base
frame covered with textured / metallic/white front
plate , modules erected with necessary
connections as per site situation directed by
Engineer In charge. (3) Two Pin/RJ-11
Telephone Socket[A] For One Gang Cat.III
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
107 Providing following type of Modular Type 1.00 160.59 Nos.
Accessories mounted with PVC /
metallic/Wooden box, single mounting base
frame covered with textured / metallic/white front
plate , modules erected with necessary
connections as per site situation directed by
Engineer In charge. (4) TV Co-axial Socket
outlet Cat-III
108 Providing following type of Modular Type 9.00 25.25 Nos.
Accessories mounted with PVC /
metallic/Wooden box, single mounting base
frame covered with textured / metallic/white front
plate , modules erected with necessary
connections as per site situation directed by
Engineer In charge. (7) Blank Plate Single
109 Providing following type of Modular Type 3.00 160.59 Nos.
Accessories mounted with PVC /
metallic/Wooden box, single mounting base
frame covered with textured / metallic/white front
plate , modules erected with necessary
connections as per site situation directed by
Engineer In charge. (8) Computer RJ-45 socket
110 Providing following type of Modular Type 2.00 180.79 Nos.
Accessories mounted with PVC /
metallic/Wooden box, single mounting base
frame covered with textured / metallic/white front
plate , modules erected with necessary
connections as per site situation directed by
Engineer In charge. (9) 16 Amp. SP one way
switch Cat-III
111 Providing following type of Modular Type 2.00 199.98 Nos.
Accessories mounted with PVC /
metallic/Wooden box, single mounting base
frame covered with textured / metallic/white front
plate , modules erected with necessary
connections as per site situation directed by
Engineer In charge. (10) 6/16Amp. Universal
socket Cat-III
112 Providing and erecting ISI mark Medium class 140.00 33.33 Mtrs.
RIGID PVC PIPES of following size complete to
be erected on/in wall or ceiling erected with
necessary PVC fittings & Junction boxes fixed
with adhesive solution & Clamps with following
dia of pipes, in approved manner as directed (b)
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
113 Providing and erecting ISI mark Medium class 35.00 54.54 Mtrs.
RIGID PVC PIPES of following size complete to
be erected on/in wall or ceiling erected with
necessary PVC fittings & Junction boxes fixed
with adhesive solution & Clamps with following
dia of pipes, in approved manner as directed (c)
114 Providing & erecting PVC Corrugated Flexible 25.00 21.21 Mtrs.
Conduit with required nos. of coupling, PVC
bushes, Check-nuts etc. complete of following
sizes. (2) 25 mm
115 Providing & erecting PVC Corrugated Flexible 20.00 27.27 Mtrs.
Conduit with required nos. of coupling, PVC
bushes, Check-nuts etc. complete of following
sizes. (3) 32 mm
116 Providing and erecting Mains with 1.1 KV grade 322.00 104.03 Mtrs.
FRLS PVC insulated ISI marked stranded
Copper conductor wire in following type of pipe
to be erected concealed in /flushed on
wall/ceiling, with 1.5 sq. mm copper conductor
FRLS PVC insulated stranded wire of green
colour for earth continuity of following size (A)
with medium class Rigid PVC pipe and
accessories (b) 2 wire 2.5 sq. mm
117 Providing and erecting Mains with 1.1 KV grade 120.00 140.39 Mtrs.
FRLS PVC insulated ISI marked stranded
Copper conductor wire in following type of pipe
to be erected in / on wall / ceiling with 2.5 sq.
mm copper conductor FRLS PVC insulated
stranded wire of green colour for earth continuity
of following size (A) with medium class Rigid
PVC pipe and accessories (a) 2 wire 4 sq. mm
118 Providing and erecting Mains with 1.1 KV grade 32.00 326.23 Mtrs.
FRLS PVC insulated ISI marked stranded
Copper conductor wire in following type of pipe
to be erected in / on wall / ceiling with 2.5 sq.
mm copper conductor FRLS PVC insulated
stranded wire of green colour for earth continuity
of following size (A) with medium class Rigid
PVC pipe and accessories (h) 4 wire 6 sq. mm
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
119 Providing and erecting Mains with ISI marked, 20.00 115.14 Mtrs.
1.5KV grade electrolyte multi stranded, annealed
copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected
in existing pipe of following size (Specifically for
control panel, relays, power switchgears, motor
starters & control wiring) with required size of
copper lugs, nuts and bolts if required. (f) One
wire 10.00 sq. mm
120 Supplying and erecting Flexible PVC insulated 53.00 58.58 Mtrs.
multi strand multi core 1.1 kv grade ISI marked
copper wires of following size to be erected as
directed. e) 1.50 Sq.mm 3 core round PVC
121 Providing & Erecting approved make following 45.00 62.62 Mtrs.
size of TV Co-axial flexible cable comprising
inner conductor of solid bare copper insulated
with Foam PE & Secondary conductor made of
poly - Aluminium film bonded Al. Braids @
suitable coverage overall sheathed with black
PVC insulation. e).RG-11
122 Supplying & erecting approved make Telephone 25.00 20.20 Mtrs.
Cable electrolytic copper conductor PE
insulation twisted in two pairs, & wrapped with
FRLS PVC tape & sheathed with FRLS PVC or
HFFR outer Jacket suitable for telephone wiring
& confirming to C-DOT erected in existing pipe.
of following size of conductors & nos.of pairs.
With necessary connections. [A] Conductor Size
0.5 mm (a) Unarmoured 2) Two Pairs
123 Supplying & erecting approved make LAN cable 96.00 47.47 Mtrs.
of following size in existing pipe as per direction
124 Supplying & erecting M.S. Box having 16 Gauge 1.00 88.88 Nos.
painted with red oxide or Heavy duty PVC box
erected flushed on wall or concealed in wall with
necessary plastering & finishing as directed of
following size. (c) 200 mm x 250 mm x 75 mm
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
125 Providing & erecting Switch board for 3.00 1133.22 Nos.
Computer or electric apparatus consisting of
following modular type accessories mounted
with PVC / Metallic concealed/open box with
single mounting base frame covered with
textured/metallic /white front plate,modules
erected with necessary connections as directed
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug
For Modular Type Accessories.Cat-III
126 Decorative call bell Ting-tong box type 250 volts 1.00 71.71 Nos.
complete erected
127 Supplying and erecting LED indoor fittings with 12.00 373.70 Nos.
LEDs of wattage 0.2 Watt to 0.5 Watt
assembled on single MCPCB, with housing
used as a heat sink shall be made of thick sheet
Steel conforming to IS: 513/CRCA/ aluminium
die cast powder coated and high U.V. &
corrosion resistance with diffuser with company
mark/name 160V to 270V, Power Factor more
than 0.95, THD < 15%, CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED LED
driver efficiency > 85 % ( fitting required LM-79
& LM-80 Certificates) (NOTE: Below description
have shown ranges of Wattage capacity of LED
wattage capacity between the ranges shown.)
(A) Tube Light with integral/ non-integral driver .
(iv) 22-24 Watts, Surge - 2KV,IP-20,
conventional 4 feet Cat III
128 Supplying and erecting led lamps with following 1.00 112.11 Nos.
wattage capacity of 220 to 240 voltage,
minimum 15000 burning hours life, 500 V in built-
surge protection, Polycarbonate diffuser,
mounting suitable for E14 / E27 / B22 lamp
holders, pf >= 0.5 (A) LED Lamps integral type,
with PC diffuser suitable LAMP holder (i) 5 to
8 watts Cat-III
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
129 Supplying and erecting LED indoor fittings with 6.00 1794.77 Nos.
LEDs of wattage 0.2 Watt to 0.5 Watt
assembled on single MCPCB, with housing
used as a heat sink shall be made of thick sheet
Steel conforming to IS: 513/CRCA/aluminium
pressure die cast powder coated and high U.V.
& corrosion resistance with diffuser housed in
aluminium casted body with company
mark/name 160V to 270V,Power Factor more
than 0.95, THD < 15 %, CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt , LED driver
efficiency > 85 % ( fitting required LM-79 & LM-
80 Certificates) (NOTE: Below description have
shown ranges of Wattage capacity of LED
wattage capacity between the ranges shown.)
(B) LED Panel Light with provision for Plane
front frame with translucent cover fixed to
housing complete.IP20 (vi) 36 watts, 24" x 24",
Surge- 2KV Cat-III
130 Supplying and erecting LED street light / Flood 8.00 2843.15 Nos.
light fittings with High power White LEDs
wattage of 3 Watt and above assembled on
single MCPCB, efficiency more than 130 lm/w
and corrosion free High pressure die cast
aluminum housing with smooth finish powder
coated and heat sink extruded aluminium with
diffuser and Polycarbonate optics/ lenses, with
toughened glass with company mark/name
engraved or embossed 160 to 270 V, Power
Factor more than 0.95, THD < 10 %, CCT
K to 5700K, Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency
> 85 %. (fittings required LM-79 & LM-80
certificates) (NOTE: Below description have
shown ranges of Wattage capacity of LED
wattage capacity between the ranges shown.)
(A) Street Light (IP-65), Surge protection -4KV
integral and ,Light must have 440VAC line
supply with over-voltage protection. (i) above
to 47 watts Cat-III
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
131 Supplying and erecting LED street light / Flood 2.00 2843.15 Nos.
light fittings with High power White LEDs
wattage of 3 Watt and above assembled on
single MCPCB, efficiency more than 130 lm/w
and corrosion free High pressure die cast
aluminum housing with smooth finish powder
coated and heat sink extruded aluminium with
diffuser and Polycarbonate optics/ lenses, with
toughened glass with company mark/name
engraved or embossed 160 to 270 V, Power
Factor more than 0.95, THD < 10 %, CCT
K to 5700K, Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency
> 85 %. (fittings required LM-79 & LM-80
certificates) (NOTE: Below description have
shown ranges of Wattage capacity of LED
wattage capacity between the ranges shown.)
(C) Post Top Lantern LED fitting comprises of
finish cast aluminum spigot and spun aluminum
canopy fixed with opal polycarbonate, pipe
arrangement for vertical mounting driver and
accessories wired up to terminal block.IP
132 Providing and erecting Approved make Four 1.00 6790.23 Nos.
pole moulded case circuit breaker having
breaking capacity ICU of 25 KA. at 415 V,having
normal current rating up to 25 A to 100A. with
Fixed thermal & magnetic release suitable to
work on A.C. supply 50 c/s. with all internal
connections, spreader tinned copper & complete
erected in existing 16 G.M.S. housing.
ICS=100% of ICU only Cat III
133 Providing and erecting Miniature circuit breaker 6.00 297.95 Nos.
single pole 0.5A to 2A system and having
breaking capacity 10 KA to be erected in
existing box. confirming to IS 8828/1996 with ISI
Mark Cat.III
134 Providing and erecting Miniature circuit breaker 12.00 123.22 Nos.
single pole 6A to 25A suitable to operate on
V A.C. system and having breaking capacity
KA to be erected in existing box. confirming to IS
8828/1996 with ISI Mark Cat-III
135 Providing & erecting 240 V MCB double pole 5.00 325.22 Nos.
switch for lighting Load (B Curve) having 10 KA
breaking capacity & confirms to IS : 8828 in
existing box having following capacity (B)
Amp. Cat-III
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
136 Providing & erecting 415 V MCB Four Pole for 5.00 811.03 Nos.
Motor & Inductive Load (C Curve) having 10KA
breaking capacity & confirms to IS :8828 in
existing box having following capacity (B.) for
Amp. Cat-III
137 Providing and erecting Sheet Steel powder 1.00 2913.85 Nos.
coated MCB distribution board - flush / surface
mounted fitted with busbar, neutral link, earth
bar and DIN rail, Conforms to IS 8623-1 & 3, IEC
61439-1 & 3 without MCB to house appropriate
nos. of MCBs.(The DBs should be used of same
company of MCB to be used) suitable for (B)
three phase incoming and single phase
horizontal type outgoing Per phase isolation
type (PPI) (b) sheet steel double door (ii) 6 way
138 Providing and erecting Approved make RCCBs 3.00 2456.32 Nos.
conforming to IS: 12640 and having sensitivity of
30 mA and Short Circuit withstand capacity of
KA and suitable for operation on single phase
240 V,50Hz. having characteristic of quick action
& tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed (iI)
Amps.DP Cat. III
139 Providing and erecting metallic vitrified danger 2.00 69.69 Nos.
notice board as per language suggested by
engineer incharge for MEDIUM VOLTAGE
installation to be erected as per IS-2551.
140 Providing and erecting Annealed bare Copper 4.00 794.87 Kgs.
wire 8 to 16 SWG.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
141 Supplying & erecting earth pit of minimum bore 2.00 4591.46 Nos.
dia.150mm size approved make Earthing
Electrode consisting Pipe-in-Pipe Technology as
per IS 3043-1987 made of corrosion free hot
dipped G.I.Pipes having Outer pipe dia of
50mm having 80-200 Micron galvanising, Inner
pipe dia of 25 mm having 200-250 Micron
galvanising, connection terminal dia of 12mm
with constant ohmic value surrounded by highly
conductive compound with high charge
dissipation suitable for following type of
applications with chamber and heavy duty cover.
(A)(approved make OEM has to submit test
certificate including value of earth resistance of
installation duly stamped and signed by agency
and officer Incharge has to ensure the value of
earthing resistane mentioned in test Certificate)
& having back filling compound of (B) Inner
chemical (CCM Compound)- Resistivity:-
ohm / meter testing as per IEC 62561-2017,
Voltage drop:- < 1 volt at no load & dry form,
Sulphar content:- <2%(C) Back fill Compound :-
Earthing compound should be capable to retain
moisture for long time Necessary test report
must be submitted by Agency. (a) For Electrical
Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
142 Providing , erecting , fabricating the M.S. 70.00 77.77 Kgs.
structure as per requirement on site
incorporating proper size of M.S.
angles,square,round, flats, bars, channels,
sections complete with cutting, welding, grinding
& finishing duly painted with one coat of red
oxide with erection on site as per direction of
engineer in charge with necessary grouting,
cementing, plastering & finishing complete.
143 Providing and erecting XLPE(IS:7098)(I)-88 ISI 120.00 95.95 Mtrs.
armoured cable Aluminium conductor for
KV. to be laid on wall with necessary clamps or
in existing trench / pipe of following size of
cables. (A) 2 core 4 Sq. mm
144 Providing and erecting XLPE(IS:7098)(I)-88 ISI 60.00 264.62 Mtrs.
armoured cable multistrand Aluminium
conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of
following size of cables (B) 3 1/2 core 35 Sq.
mm ( 16 Sq. mm 1/2 core)
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
145 Providing and erecting XLPE (IS:7098)(I)-88 ISI 280.00 140.39 Mtrs.
armoured cable multistrand / Solid Aluminium
conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of
following size of cables (A) 4 core 4 Sq. mm
146 Making trench in soft soil of suitable width of 90 120.00 55.55 Mtrs.
cm deep for laying cable or locating the fault all
over the run and back filling the same and
making the surface as normal ground.
147 Making trench in Hard Murrum / Tar Road of 60.00 74.74 Mtrs.
suitable width of 90 cm or required depth for
laying any size of cable or locating the fault all
over the run and back filling the same and
making the surface as normal ground.
148 Making trench in Hard Murrum / Tar Road of 24.00 357.54 Mtrs.
suitable width of 90 cm or required depth for
laying any size of cable or locating the fault all
over the run and back filling the same and
making the surface as normal ground. (B) If
additional machinery like hammer driller or JCB
149 Providing and, fixing heavy duty flange type 12.00 33.33 Nos.
brass cable gland with rubber ring for PVC
insulated armoured cable complete with out
going tails, insulating tape etc for following size
of cables. (A) 2 to 4 core 2.5 / 4 Sq. mm
150 Providing and, fixing heavy duty flange type 4.00 75.75 Nos.
brass double compression type cable gland
with rubber ring for PVC insulated armoured
cable complete with out going tails, insulating
tape etc for following size of cables. (B) 3 & 1/2
core 35/50 Sq. mm
151 Solder less crimping type Aluminium lugs 48.00 6.06 Nos.
conforming to IS suitable for cable of following
size evenly crimped with high pressure tool &
connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved
manner. (A) 1.5/ 2.5/4/6 Sq.mm
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
152 Solder less crimping type Aluminium lugs 16.00 20.20 Nos.
conforming to IS suitable for cable of following
size evenly crimped with high pressure tool &
connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved
manner. (D) 35/50 Sq.mm.
153 Providing and erecting Approved make Ceiling 11.00 1596.81 Nos.
fan with double ball bearing ISI mark with
condenser A.C. 23OV.50 c/s.1200 mm. sweep
complete, canopy erected on existing hook or
clamp with earthing. [Make shall be approved by
Engineer in charge]
154 Supplying and erecting 19 / 20 mm. nominal 6.00 108.07 Mtrs.
bore Medium Class M.S. Pipe down rod erected
duly painted for fan complete with proper
insulation without leckage and earthing.
155 Supplying & erecting fan hook box of 10 mm 11.00 108.07 Nos.
M.S. round bar bounded to the RCC bars up to
50mm length each side and pierced through a
16 Gauge M.S. box / Heavy Duty PVC box
complete erected concealed in Ceiling with
necessary finishing.
156 Supplying & erecting approved make low noise 1.00 1366.53 Nos.
decorative exhaust fan having square frame
ABS body with inbuilt lowers & square frame.
250mm with 1350 RPM Cat.II
157 Supplying & erecting approved make SMC 4.00 515.10 Nos.
press moulded composite FRP. loop-in, loop-
out approx. 2mm thick box complete with
Bakelite connector strip 5way(3P+N+E),DIN rail
for mounting mob & hinged doors as per
requirement having locking arrangements with
mounting clamp with nuts, bolts & washers
suitable for erection on pole with cable clamps&
earth bolt of following size of box. (b) 250mm x
200mm x 100mm [deep]
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
158 Supplying & erecting approved make Digital time 1.00 3168.37 Nos.
switch having lithium cell 6 years operative and
operate battery backup 1 channel day clock with
14 memory programme, suitable to operate on
240V + 5%, 16A with, floating contacts Minimum
switching setup time 1 minimum & LCD display.
Also comprised permanent ON/OFF switching.
Programming switches & housed in fire proof
thermoplastic enclosure & transparent cover
erected as required with necessary connection
erected as directed.
159 Supplying & erecting power contactor ,AC3 duty 1.00 2782.55 Nos.
for time switch complete erected as per direction
Cat III [D] 4 pole 440V 40 Amp.
160 Supplying & Erecting floor mounted/ table top 1.00 11557.43 Nos.
single phase 50Hz water dispenser with SS
food grade cold tank specification having three
water tap of hot/cold/ambient water function,
LED display with storage capacity from 2.5 Ltrs
to 3.2 Ltrs, cooling capacity 2.5ltrs/hr, including
refrigerant with 20ltrs refrigerant storage
capacity compartment inclusive 1No.water
topping bottle.
161 Supplying & erecting 5 stage single reverse 1.00 8431.48 Nos.
osmosis water purification system with M.S.
powder coated frame, prefilter housing with 'O'
ring presediment filter GAC filter, carbon filter
suitable buster DC pump capacity 80 psi,
mention with 40 psi inline type post carbon filter
auto low & high pressure switches with following
size of storage tank & LPH capacity & erected
as directed [A] 10 Ltr / Hr with 7 Ltr StorageTank
162 Providing & erecting open well type horizontal 2.00 10574.70 Nos.
mono block pump set with stainless steel body
having following specification (C) 1 H.P. single
phase open well motor pump set suitable for
185 LPM discharge @ 25 mtr. head, suitable for
32 mm dia. Delivery pipe with control panel.Cat.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
163 Supplying & erecting approved make motor 2.00 7722.46 Nos.
control cubical panel (Direct - on - line) made
from 16 G. CRCA sheet duly epoxy powder
painted inside and outside with hinged doors and
locking, arrangement consisting of suitable size
of ON- OFF isolator (AC - 3/23duty) main fuses,
single phasing preventer, indicating lamps for R-
Y - B phases, overload relay, Automatic water
level controller, Ammeter, Voltmeter each with
socket crimped, main contactor & overload relay,
start - stop push buttons, to be erected on angle
iron frame grouted on wall as directed. The
isolator, overload relay & contactors will be of L
& T, Siemens or BCH make only. (A) DOL up to
164 Providing and erecting ISI marked PVC 80.00 146.45 Mtrs.
insulated PVC Sheathed Flat flexible
Submersible copper cable approved make of
following Size. (C) 3 Core x 4 Sq. mm
Total Rs.
Rupees FourtyTwo Lakh FiftyThree Thousand Six Hundred Three and Paisa Fourty Only
I / We / am/are willing to carry out the work at ________________________________% above / below
percent (should be written in figure and words) of the estimated rates mentioned above. Amount of
my/our tender Works out as under.
Estimated Amount Estimated Amount
put to tender Rs. _________ put to tender Rs. _________
Deduct_______% below Add_______% above
Net Rs._________ Net Rs._________
in words ___________ in words ___________
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by
the Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills.
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.
G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in
R.C.C. items where there is a change as per actual mix design the cost of difference of cement
consumption have been deducted from the rate of original item at the rate of input rate mentioned in
all the tender.
Signature of Contractor
Deputy Executive Engineer Executive Engineer
R.& B. Sub Division R.& B. Division
Idar Himatnagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
2.GR to be attached with DTP_SBD.pdf
GRs - SBD with Index_compressed.pdf
GR - 1.pdf
GR - 2.pdf
GR - 3.pdf
GR - 4.pdf
GR - 5.pdf
04.05.2026.pdf
General Specification - State.pdf
BUILDING WORK BOOKLET.pdf
BOQ - Intensive Cattle Development Programme At Ratanpur.pdf
Details Specification - At Ratanpur.pdf
Electrical Work - Elect. Sub. Con.pdf
Electrical Work - MOU.pdf
Electrical Work - Sch_A.pdf
Electrical Work - Special Condition.pdf
SBD Book_2023_Intensive Cattle Development Programme At Ratanpur.pdf
Special Condition - Work.pdf
Specification Index - Intensive Cattle At Ratanpur.pdf
Work Details - Intensive Cattle Development Programme At Ratanpur.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .