SPECIAL REPAIR TO ROADS IN THE AREA OF AGE B/R-I IN ARMY AREA JODHPUR UNDER GE (ARMY) CENTRAL

Amount

Scarifying and picking gravelled macadam or bituminous macadam surfaces exceeding 50mm thick but not exceeding 100 mm deep area exceeding 400 Sqm complete all as specified and directed Note 1 - Taking out of the damaged premixed carpet and damaged WBM etc on the road edges, curves, bell mouths etc has been catered in the item) 2 : Material obtained shall be cleaned, screened and stacked properly for reuse.)

M&L for 100 mm thick(spread thickness) Moorum spread, rolled and consolidated to gradient alongside paved roads as in berms incl necessary watering & rolling complete all as specified and directed

M&L 150mm thick (compacted thickness) WBM, sand stone with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed

Rolling and consolidating formation surface in cutting rolled 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed

Preparing surfaces of existing black top surfaces by brooming with wire brushes for removing caked mud etc sweeping with gunny bag to remove all loose dirt etc complete all as specified and directed

M&L for applying evenly a priming/tack coat with bituminous primer of paving bitumen @ 5 kg per 10 Sqm over bitumenous surfaces complete all as specified and directed

M & L for bituminous premix semi-dense asphaltic concrete 40 mm consolidated thickness using paving bitumen VG-30 with 5.5% binder content by weight of total mix. Rolled and compacted to required camber and gradient complete, and rolled with 8 to 10 tonne power roller complete all as specified and directed. Note : Bitumen used in the work shall be paving bitumen gradeVG-30 irrespective whatever specified.

M&L for marking 2.5 mm thick centre line, stop line, dashes, arrows, brackets & similar work exc. 10 cm wide on road surfaces as per IRC pattern with thermoplastic road marking paints ( white or golden yellow) of first quality with 8% glass beads laid at temperature 160 degree C with a special applicator machine complete all as per manufacturer's instructions & traffice diversion arrangement complete all as specified and directed

S&F in repair cat's eye made of ABS plastic with beams two sides fixed with high intensity grade Retro-Reflective sheeting in Red/Yellow colour having fixing provision of nails two nos. complete all as specified and directed

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions as approved by GE complete all as specified and directed

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and directed

S & F in repairs retro reflective informatory sign board 60 x 90 cm as per IRC 67 made out of high intensity reflective grade sheeting fixed over aliminium sheeting 1.5mm framed with 25mm stainless steel square tube supported on stainless steel 40mm dia pipe 3.0m length incl 0.5m embeded in PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) complete all as specified and directed. The size of foundation shall be 45 x 45 x 60cm complete all as specified and directed Note:- The stainless steel shall be of SS 304 Gde.

S&F in repair metal tubular delinator made out of 45mm dia MS Pipe of 600mm total height, duly powdered coated and 100mm dia high quality and durable glass reflector made of top quality weather resistance plastic material (thermo plastic polyester clastomer), 3 bands of green/red/yellow reflactor of size 25mm wide strips with metal jalli for reflector protection, embeded in PCC (1:2:4) 150 x 150 x 300mm size complete all as specified and directed

M & L for stone kerb of roughly squared stone size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush complete all as specified and directed

M&L for 75 mm thick Cement concrete type D-2 (1:4:8) (40 mm graded agg) as in sub base to floors incl well compacting & laid to levels including demolition of cement concrete complete all as specified and directed

S&F machine made precast cement concrete blocks (interlocking paves) Rubberised finish coloured (lacquer Coated) of 60mm thick with 6mm top layers of anti abrasive material M-30 Grade all as as per sample kept in GE Office including laid over 25 mm thick sand filling layer & spreading fine sand over the tiles to fill in the joints & cleaning the same after filling of joints complete all as specified and directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

S & F in repair traffic Mirror factory made 800 mm dia made by plastic including necessary fixing arrangements including holding post, excavation, PCC etc complete all as specified and directed.

M & L for stone kerb of roughly squared stone size 15cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush including demolition of old stone of any discription etc complete all as specified and directed

M&L for repairs to pot holes any depth not exceeding 1 sqm each including sweeping free from dust and mud or water ,scoring sunken surfaces in roads etc cutting around edges to at least 30 mm in depth making good by applying tack coat with paving bituminous primer at 5 Kg / 10 sqm putting semidense asphaltaic concrete using 5.5% binder content by weight of total mix, well rammed and sealed well rammed (incl supply of premixed macadam , binder and chippings) depth of pot holes exceeding 30mm complete all as specified and directed

M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a priming/tack coat with bituminous primer by cutback bitumen at 10 kg per 10 sq metre etc complete all as specified and directed

M&L Bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.50% binder (Paving bitumen any penetration) content by weight of total mix, rolled and compacted to required camber and gradient complete using 8-12 ton capacity mechanical power roller complete all as specified and directed

Scarifying or picking gravelled, maccadam or bituminous maccadam surfaces exceeding 50mm deep and not exceeding 100 m deep in area not exceeding 400 Sqm complete all as specified and directed

Preparing WBM surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc applying evenly a priming /tack coat with paving bituminous primer VG-10 grade at 10kg per 10 Sqm complete all as specified and directed

MOHIT ENTERPRISES

MAHARANI CONSTRUCTION

B R C TRADING COMPANY

JAGDISH PRASAD & CO