Construction of Shikshak Sadan Evam Pustak Vitaran Kendra for HP Board of School Eduction at Dharamshala, Kangra (H.P.)

Amount

Excavation in foundation, trenches etc. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, shuttering and pumping out water upto any depth or any quontam of water including slush which may be arise during de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as direction of Engineer-In-Charge and retuning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-Charge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rates inclusive of octori, royality, Malkhana, toll taxes, GST and any other taxes imposed by the Government.

Excavation in drains and channels etc; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseling or any other mixed variety of soil, including shoring, shuttering, de-watering and pumping out water upto any depth or any quontam of water including slush which may be arise during the de-watering removal of slush and stacking the serviceable and un-serviceable material clear from edge of excavation as per direction of Engineer-In-Charge and then returning the stacked soil in 15cm (fifteen centimeter) layer when required into plinths sides of foundations etc. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- In charge, within all leads, lifts of materials and other incidentals. As per approved drawing, design and as directed by the Engineer-in-Charge. The rates inclusive of octori, royality, Malkhana, toll taxes, GST and any other taxes imposed by the Government.

Cutting in earth work in all kind of soil by mechanical means including saturated soil comprising of ordinary soil, soft rock, hard rock, chiseling, wedging out of rock (where blasting is prohibited) and their intermediate classification of soil, setting out true to the required lines, grades, cutting and trimming of side slopes and level as shown in the drawing and as directed by engineer-in-charge at site according to the MORD technical specification clause 302, 304 and 1603 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of road and transportation of useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus material to required width of the road or on approved dumping sites through all modes of transportation including head load or animal transport or mechanical means along with its leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour if required. Recovery of stone to the tune of 191.14 cubic metres quantity at the rate of 300/-(Rupees Three hundred) per cubic metre shall be effected from the contractor's running bills on pro-rata basis as per actual quantity executed. Any loss to the public, private property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be compensated by him in all cases including carriage of matereials within all leads and lifts and other incidentals The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. .

Excavation in earth work and disposal of all excavated earth upto a lead of 20 metres and lift upto 1.50 metres, disposed earth to be levelled and neatly dressed: pck & jumper work as directed by the Engineer-in-Charge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rates inclusive of octori, royality, Malkhana, toll taxes, GST and any other taxes imposed by the Government.

Demolition of stone masonry above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead. Dressed stone in cement mortar. Actual useful servicable material obtained/recieved from the dismenteling is to be properly stacked at site and to be handed over to the concern department as directed by Engineer-In Charge, including carriage of material within all leads & Lift and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Demolition of stone masonry above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead. Rubble stone in cement mortar. Actual useful servicable material obtained/recieved from the dismenteling is to be properly stacked at site and to be handed over to the concern departments as directed by Engineer-In Charge, including carriage of material within all leads & Lift and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating out from R.C.C. works and actual useful servicable material obtained/recieved from the dismenteling is to be properly stacked at site and to be handed over to the concern department as directed by Engineer-In Charge, including carriage of material within all leads & Lift and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead work and actual useful servicable material obtained/recieved from the dismenteling is to be properly stacked at site and to be handed over to the concern department as directed by Engineer-In Charge, including carriage of material within all leads & Lift and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within 20 metres lead.G.I. Sheet roofing and actual useful servicable material obtained/recieved from the dismenteling is to be properly stacked at site and to be handed over to the concern department as directed by Engineer-In Charge, including carriage of material within all leads & Lift and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Demolition above G.L.upto floor two level including disposal of unserviceable materials within 20 metres lead.un-reinforced cement concrete upto 15cm. Thickness and actual useful servicable material obtained/recieved from the dismenteling is to be properly stacked at site and to be handed over to the concern department as directed by Engineer-In Charge, including carriage of material within all leads & Lift and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking within 20 metres lead.Not exceeding 3 sqm in area as directed by Engineer-In Charge, including carriage of material within all leads & Lift and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Sand filling under floor including watering, ramming, consolidating and dressing complete as per HP.PWD., Specification and approved drawing as directed by Engineer-In Charge, including carriage of material within all leads & Lift and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Supplying and filling broken/ crushed stone/ brick bats aggregatee chipping of hard stone of 40 mm size as directed by Engineer-In Charge, including carriage of material within all leads & Lift and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings as per Architectural drawing and the like within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders and lintels sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depths within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts Square, rectangular or polygonal in plan within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls under any thickness within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and laying cement concrete 1:4:8 (One cement isto Four sand isto Eight graded broken/crushed stone aggregate 40mm (Forty milimetres ) nominal size and down gauge) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Stone filling in plinth with approved quality under floor including watering, ramming, consolidating and dressing complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic meter to give an smooth surfaces mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like and mass concrete in all depth / thickness upto all floor level within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves their supports balconies, beams, girder, bressumers and cantilevers in all depth / thickness upto all floor level etc; within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement isto Four sand isto Eight graded broken/crushed stone aggregate 40mm (Forty milimetres ) nominal size and down gauge) mechanically mixed and curing complete including cost of forms work in foundation and plinth within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete grade M-25 design mix to obtain the compressive strength of 25N/mm2 (twenty five newton per square millimeter) cement contents not less than 360 kg (Three hundred sixty kilogram) per cubic meter excluding cost of form work and reinforcement for reinforced concrete ,including carriage of materials upto all leads and lifts as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts for all floors heights in all depth / thickness within all leads, lifts of materials and other. incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor level within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in vertical walls upto any thickness but not less than 0.10m (Zero decimal ten metres) including attached, pilasters, buttresses, plinth and string courses and the like within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete in reinforcement work for reinforced concrete Chhajjas for all thickness in all floor levels up to all heights and all thickness including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work and curing complete but excluding the cost of reinforcement for reinforced concrete work up to all floors level up to all height as per direction of Engineer-In-charge. within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying reinforcement concrete work M-20 (M-twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) mechanically mixed and vibrated to give smooth and even surfaces including centring and shuttering etc. but excluding the cost of reinforcement as in mouldings as in cornices, windows sills etc not exceeding 15cm (Fifteen centimetres) in girth as per approved specification, drawing and design complete upto floor all level within all leads, lifts of materials and other. incidentals and as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete mechanically mixed and vibrated excluding cost of form work in foundation and plinth as per approved specification, drawing and design complete upto floor all level within all leads, lifts of materials and other. incidentals and as per approved drawing, design and as directed by the Engineer-in-Charge.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth at plinth level in Cement Mortar 1:6 (one cement isto six sand) including levelling with cement concrete 1:6:12 ( one cement isto six sand isto twelve graded stone aggregate 20mm (twenty millimetre) nominal size including entire carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including rakcking out joints with cement mortar 1:6 (One cement isto Six sand) and curing complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Applying cement slurry on Reinforcement Cement concrete slab or cement concrete work using 2.75 kgs. (Two point seventy five Kilogram) Of cement per square meter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete as per HP. PWD specifications excluding cost of centring and shuttering including carriage in all leads,lifts and as per the direction of Engineer in charge.

Providing Tor steel reinforcement of Sail / Tisco /Tata for reinforced cement concrete work including bending, binding, straighting, cutting and placing in position complete including cost of binding wires complete for all floors within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying Damp Proof Course 100mm (One Hundred milimetres) thick with cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate 12.5mm (Twelve decimal five milimetres nominal size) and curing complete, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) 1.70 Kgs. (one decimal seventy Kilogram’s) per square metre. On Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil; within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Second class half brick work using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:4 (one cement :four sand) within all leads, lifts of materials and other incidentals, as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Second class brick work using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete,within all leads, lifts of materials and other incidentals, as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Second class brick work using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:4 (One cement isto four sand) within all leads, lifts of materials and other incidentals, as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position.2nd class kiln seasoned Deodar wood within all leads, lifts of materials and other incidentals, as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 40mm (forty millimetres) thick second class deodar wood, panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws, within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge.The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and Fixing 12 mm (twelve millimetre) thick both side prelaminated water proof particle board of Tesa / CENTURY/Kitlam /Greenply exterior/ interior grade ISI marked as per approved shade within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixig glazing with glass panes of 6mm (six milimertres) thickness of Modiguard / Sant gobind (weight not less than 13.75 kg/sqm (Thirteen decimal Seventy five kilograme per square metres) glazing in aluminium door, windows, ventilators\ shutter and partition etcetra; with PVC/Neoprens gasket etcetra; complete as per the architectural drawings, specification and the direction of Engineer-in-Charge (Cost of aluminium snap beading shall be paid separately) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixig glazing with glass panes of 5mm (five milimertres) thickness of modi guard / Sant gobain (weight not less than 10.00 kg/sqm (ten decimal zero kilograme per square metres) glazing in aluminium door, windows, ventilators\ shutter and partition etcetra; with PVC/Neoprens gasket etcetra; complete as per the architectural drawings and the direction of Engineer-in-Charge (Cost of aluminium snap beading shall be paid separately) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge.

Supplying and fixing 4 mm (four millimetre) thick frosted glass panes of modi guard / Sant gobain including fittings and putty complete in all respect within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 40mm (Forty milimetres) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85 G with wire of 0.56mm (Zero decimal five six milimetres) diameters for doors, windows and clerestory windows including bright finished /black enameled iron hinges with screws within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 35 mm (Thirty five milimetres) thick both side commercial phenol bonded centuary / alpro/ duro ply or its equivalent ISI marked flush door No IS 2202 shutters interior grade, commercial type, core of black-board constructio to be finished with mica lamination of approved shade with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bends and face veneers on both faces of shutters. including black enamelled M.S. butt hinges within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge.The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing to existing door frames, 30mm (Thirty millimetres) thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 (Nineteen) gauge thickness and size of 19mm x19mm (Nineteen into nineteen millimetres) for styles and 15mmx15mm (Fifteen into fifteen millimetres) for top & bottom rails, code 9.120 of Rajshri M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm (Five millimetres) thick heat moulded PVC "C" channel of size 30mm (Thirty millimetres) thickness, 70mm (Seventy millimetres) width out of which 50mm (Fifty millimetres) shall be flat and 20mm (Twenty millimetres) shall be tappred in 45 (Forty five ) degree angle on either side forming style and 5mm (Five millimetres) thick, 95mm (Ninety five millimetres) wide, PVC sheet out of which 75mm (Seventy five millimetres) shall be flat and 20mm (Twenty millimetres) shall be tapered in 45 (Forty five) degree on the inner side to form top and bottom rail and 115mm (One hundred fifteen) wide PVC sheet out of which 75mm (Seventy five millimetres) shall be flat and 20mm (Twenty millimetres) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten millimetres) thick, 20mm (Twenty millimetres) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm ( One hundred into fifty into one decimal ninety millimetres) size with necessary screws etc complete as directed by the Engineer-in-Charge.within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing M.S plain grills of required patterns in wooden frames of windows etc. with M.S flats, square or round bars with round headed bolts and nuts or by screws Plain grill including entire carriage of materials in all leads and lifts.

Complete box of cupboard of 25mm (Twenty five millimetres) thick water proof termite resistant commercial board Uniply / Green ply /Kit ply /Dura ply / Marino (ISI Marked ) for shutter including 19mm thick shutter. Back side of cupboard shall be 6 to 8 mm (six to eight millimetre) thick water proof ply. The shutter from all side shall also have 6mm (six millimeter) thick hard board edging/ Topping to be finished with 1mm (one millimeter) thick mica lamination of Century / Greenlam / Action Tesa / Merinolam approved shade of office including fixing handles be provided in wood colour with nickel plated piano hinges with screws etcetera within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing magnetic catcher for cup board shutters with necessary screws etcetra; within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into Sixteen milimetres) size Pilot/sheel anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing aluminium Pilot/sheel anodized transparent or dyed to required colour and shade with necessary screws etc.Tower bolts (Barrel type) as approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

250x10mm (Two hundred into Ten milimetres) size

150x10mm (One hundred fifty into Ten milimetres) size

Providing and fixing aluminium Pilot/sheel or equivalent anodized transparent or dyed to required colour and shade and of approved make with necessary screws etc. handles with the necessary screws etc. complete. within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five milimetres) size

100mm (One hundred milimetres) size

Providing and fixing aluminium oxidized Pilot/sheel 250mm (two hundred fifty milimetres) size hook and eyes of complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing Aluminum oxidized Hydraulical door closer Complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetres) bright finished brass door stoper with rubber cushion screws etc to suit shutter thickness complete within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing 25mm (Twenty five milimetres) thick Kota Stone in flooring 55x55cm (Fifty five into Fifty five centimetres) (Mirror polished) with 7.5 cm (Seven decimal Five centimetres) wide Jaislmer yellow (uniform colour) marble band base of 20mm (twenty millimeter) thick cement mortar 1:4 (One cement: Four sand) laid over and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing moulding and nosing complete within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge . The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 25mm thick mirror polished kota stone in skirting/ dado laid on 12mm ( twelve millimeters ) thick in cement mortar 1:3 ( one cement is to three sand and jointed with grey cement slurry with pigment to match the shade of the kota stone i/c rubbing and mirror polishing complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 10mm (ten milimetre) thick double charged matt finished vetrified tiles of Nitco / Simpolo / Orient -Bell / Rak/ Kajaria / AGL/Johnson / Somany as per approved shade and design 600x600mm of size (six hundred millimetre into six hundred millimetre) manufactured of approved shade and colour in flooring and landings laid over 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying Double charged vetrified tiles of Nitco / Kajaria / AGL /Johnson / Simpolo Orient -Bell / Somany 600x 600mm x 10mm (six hundred millimetre into six hundred millimetre into ten millimetre) in grey/coloured or of approved shade and design in skirting ,dado in cement mortar 1:3 (one cement isto three sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 300X600 mm (three hundred into six hundred millimetre) antiskid Ceremic tile of premium quality of NITCO/AGL/Kajaria/Somany/Johnson/ Bell in flooring on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads, lifts of materials and other incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 300X450 mm (three hundred into four hundred fifty millimetre) Ceremic Glazed tile of Kajaria/ Swastik / Somany / Bell / AGL/Johnson with one border matching contrast at top in skirting risers of steps and dados on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads, lifts of materials and other incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

8mm (eight millimetre) thick First class indian teak ply wooden paneling uptp 135mm(one hundred thirty five) height over 50 x 30 mm (fifty into thirty millimetre) soft wood grid frame work at 600 mm (six hundred millimetre) centre to centre with decorative teak wood beading over teak ply of size 25 X 12 mm (twenty five into twelve millimetre) having moulding on both side cornice / Edging on the top of paneling to be finished with 55 x 30 mm (fifty five into thirty millimetre) teak wood beading as per detail. planking tongued and grooved within all leads, lifts of materials and other incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing 25mm (Twenty five milimetres) thick Cheema pink granite stone in flooring 55x55cm (Fifty five into Fifty five centimetres) in single piece for tread of steps/ risers with uniform nosing/ edging on 20mm (twenty millimeter) thick cement mortar 1:4 (One cement: Four sand) laid over and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge

Providing and laying 19mm (nineteen millimetre) thick polished Grey/ Black granite Marble in under counter wash basin & water trough with semi round nosing 20mm (twenty millimetre) (average) thickness base of cement mortar 1:3 (one cement isto three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge

40mm (forty milimetres) thick cement concrete flooring 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) laid in one layer finished with a floating coat of neat cement within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 50 mm (fifty millimetre) dia SST (Stainless steel) pipe handrail fixed with 35 mm (thirty five millimetre) dia stainless steel baluster as per detail in combination of 35mm (thirty five millimetre) dia and 15/20mm (fifteen / twenty millimetre) SST pipe baluster knock down railing of KICH hand rail fixed on 10X50mm (ten into fifty millimetre) S.S.flat baluster placed at 1200 mm (one thousand two hundred millimetre) C/C along with 3 (three) nos (three Number) @ 16 MM (sixteen milimetre) mid rail connected at the side of the baluster with fixtures .The baluster would be fixed on the floor with casted base plate minimum 6mm thick base plate shall be concealed with suitable S.S. 316 grade cover cap .railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) within all leads, lifts of materials and other. Incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing railing 50mm (fifty milimetre) dia balcony/parapet railing welded with 25mm (twenty five milimetre) bluster embedded in cement concrete bed, 30 cm C/C with a clear height of 45cm (forty five centimetre) and jointing with electric/gas welding at top alongwith hand rail of 75x65mm (seventy five into sixty five millimetre) vertical ballusters welded jointed with each other with 2 (Two) Nos M.S. flat of 50x5mm (fifty into five millimetre) complete with applying coat of red lead paint as per specification and direction of Egniener-Incharge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing railing 50mm (fifty milimetre) dia M.S. hollow pipe balcony/parapet railing welded with 25mm (twenty five milimetre) bluster dia embedded in cement concrete bed, 30 cm C/C with a clear height of 90cm (Ninety centimetre) and jointing with electric/gas welding at top alongwith hand rail of 75x65mm (seventy five into sixty five millimetre) vertical ballusters welded jointed with each other with 2 (Two) Nos M.S. flat of 50x5mm (fifty into five millimetre) complete with applying coat of red lead paint as per specification and direction of Egniener-Incharge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (Sixty centimetres) over all with 0.60mm (Zero decimal Sixty milimetres) thick Tata Dura shine prepainted steel sheet ISI marked - Z 120 of approved make in ridges of sail / relience / Jindal Sakti with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing valleys 90 cm (ninety centimetres) over all over all with 0.60mm (Zero decimal Six zero milimetres) thick prepainted sheet ISI marked - Z 120 of sail / TATA / relience / Jindal roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (five) micron primer coating, back coat of polyster of 5 (Five) microns including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet ISI marked - Z 120 of tata Durashine/ sail / reliance / jindal in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (Five) microns primer fixing with prepainted iron J or L hooks,bolts and nuts with prepainted limpet and rubber washers complete with all accessories as required within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 30cm (thirty centimeters) wide 25cm (twenty five centimeters) deep as per design and drawing 0.60mm (Zero decimal Six zero milimetres) thick plain G.I. sheet TATA Shakti for gutter with iron brackets 40x3mm (Forty into Three milimetres) size bolts and nuts and washers etcetera including making necessary connections with rain water pipe and providing complete accesories within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing plain M.S. B.P. sheet TATA/SAIL/JINDAL 2.00 mm (Two decimal zero millimeter) thick fixed in eaves board / facia / soffits /ceiling including cutting, fixing and welding to steel rafter, member and applying a coat of red lead primer with gas/ electric welding in position complete (frame work is to be measured and paid for separately) within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing flashing 38cm (thirty eight centimetre) overall with 0.60mm (zero point six zero millimetre) thick TATA Dura shine/SAIL prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories within all leads, lifts of materials and other. Incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing on wall face 150mm (One hundred fifty milimetres) diametres P.V.C. rain water pipes of working pressure 4/6kg (four / six kilogramme) per square centimetre of finolex / Relience / vectus/ prince pipe for rain water pipe fixed with approved adhesive including filling the joints complete within all leads, lifts of materials and other incidentals, and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing on wall face P.V.C. acessories for rain water pipes of working pressure 4/6kg (four / six kilogramme) per square centimetre of finolex / relience / vectus ./ Prince or its equivalent for rain water pipe fixed with approved adhesive including filling the joints complete in all requirement within all leads, lifts of materials and other incidentals. and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

150mm (One hundred fifty milimtres) diametrees PVC Plain bend

150mm (One hundred fifty milimtres) diametrees PVC shoe

Providing and fixing PVC holder bat clamps of approved design to P.V.C.. rain water pipe embedded in and including cement concrete blocks 10x10x20cm of 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and cost of cutting holes and making good the walls etc; within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

150mm (One hundred fifty milimetres) diameter.

Providing and fixing 600 x600 x15 mm (six hundred into six hundred into fifteen millimetre) Everest Fibre cement board/ACP Pannel of all covering with prepainted G.I. Channel system and 600mm i/c necessary fittings complete in all respect as per approved design/drawings & specifications.The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Steel work welded in built up sections of TATA/SAIL joists channels, angles, tees with connection plates or angles, cleat as in trusses, trussed purlins main and cross beams, hips jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and; placing in position complete and applying a coat of red lead paint within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge

Providing and fixing Unistone 12mm (twelve millimeter) thick cladding on walls/ Reinforced Cement Concrete surface outside as on faces of Arch masonry walls etc.on 12mm (Twleve millimetres) thick cement plaster 1:3 (One cement isto three sand) and jointed with cement slurry mixed with pigment to match the shade of stone including scaffolding etc. complete.as per Architectural drawing ,design and specification within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing of Asian paint/ Nerolac/Berger of approved shade to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter enamel paint other than white within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Applying priming coat With ready mixed priming paint, brushing Asian paint/ Nerolac/Berger of approved shadeover new steel and steel based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand paper and knotting complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting with ready mixed paint brushing wood primer pink within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Painting two or more coats of Nerolac/Asian paint/ Berger (excluding priming coat) on new wood and wood based surface with enamel paint other than white to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering and stoping within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

6mm (Six milimetres) thick cement plaster in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights within all leads, lifts of materials and other incidentals as per approved approved specification, drawings and design. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

20mm cement plaster in two caots backing coat 10mm and finishing coat 10mm thick on fair side of brick/stonemasonry walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth cement mortar 1:4 (One cement isto four sand)with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for exterior plastering upto two floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:5 (One cement isto five sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

To make groove in plaster in 20mm thick in cement mortar 1:5(One cement isto five sand) including scaffolding etc. complete as per Architectural drawing ,design and specification. within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Applying Birla / J.K white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Finishing wall with Apex weather proof exterior grade emulsion of Asians Paints /Nerolac suraksha /Bergur paint Exterior Emulsion as per approved shade approved design (Apexultima) on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Applying two coatc of Acrylic Washable emulsion Asian / Berger / Dulux /Nerolac paints for interior painting of approved shade with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat i/c necessary putty to give smooth even surface, sand papered smooth complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing Plinth protection with 60 mm (sixty millimetre) thick interlocking paver blocks with 23 cm (twenty three centimetre) dia. Half round stone ware pipe for drainage purpose base over cement concrete 1:5:10 (one cement isto five sand isto ten graded / crushed stone aggregate) 40mm (forty millimetre) nominal size for bedding of pipe within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of filled up with polysterence back or rod base members, self aligning / centering arrangement and support . The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight with polysterence back or rod surfaces mechanically snap locking the multicellular to facilitate movement within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and Fixing 150mm dia M.S. hollow pipe having length 3.00 metre (Three point zero zero metre) post for porch embeded in cement concrete 1:2:4 and fixed with M.S. plate i/c/ necessary fittings. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and Fixing M.S. Screen for Dormors within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying heavy duty 60mm (sixty milimetres) thick inter locking paver blocks precast cement concrete of NTC inter locking paver blocks vibro compacted upto M-50 (M-Fifty) grade including border or kurb block Grey or coloured over sub-base of concrete with 25mm (Twenty five milimetres) thick average thickness of cement mortar 1:4 (One cement : Four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (sub-base concrete floor to be paid for separately) within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

60mm (sixty milimetres) thick inter locking paver blocks

Supplying and fixing rolling shutters of approved make made of 80 mm X 1.25mm M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation including Rolling shutters operated by bevel gear box and crank handle exceeding 12.0 sq.m.and upto 25.0 sq.m in area(average say 18.5 sq.m).complete but excluding the cost of the top cover and spring.Shutters within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 27.5 centimetre long wire spring grade No.2 for rolling shutters within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing top cover for rolling shutters.Shutters having width 3.5 metre within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixingball bearing for rolling shutters.Shutters having width 3.5 metre within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 110mm (one Hundred ten millimeters) dia P.V.C pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Return walls and retaining/breast walls extended through the full width of the structure with slope I(V):20(H)(One vertical : Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification Clause 1206.6 and as per direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing polythelene aluminum polythelene (PE- AL-PE) composite pressure pipe U.V. stabilized with carbon block confirming to I.S. 15450-2004 of Kitec for water supply including clamps at appropriate spacing, cutting fixing and making good the walls etcetera; but excluding the cost of fittings (Internal work), including filling the joints with approved adhesive complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

1620 (20mm) twenty millimeter diameter pipe O.D. pipe

2025 (25mm) sixteen millimeter diameter pipe O.D. pipe

Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty milimetres to Forty milimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes light grade ISI marked of fenolex/vectus/price 4.6mm thick having pressure not less than 6kg /cm2 (six kilogramm per centimetre square) including fixing with approved adhesive etc. complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

110mm (One hundred ten milimetres) diametres

Providing and fixing cast iron P.V.C. holder bat clamps ISI marked of approved drawing i/c/ steel screw and rawl plug etc. including entire carriage of materials within all leads lifts and other incidentals

110mm (One hundred ten milimetres) diametres

Providing and fixing P.V.C. I.S.I. marked heal rest of Finolex / Vectus / Prince including filling the joints with including fixing with approved adhesive within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

150mm nominal (One hundred fifty milimetres) diameter. (confirming to BIS-14735-99)

110mm (One hundred ten milimetres) diameters (confirming to BIS-14735-99)

Providing and fixing P.V.C. Collar ISI marked of Finolex / Vectus / Prince including fixing with approved adhesive complete, within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

110mm (One hundred ten milimetres) diametres (confirming to BIS-14735-99)

Providing and fixing P.V.C. I.S.I. marked cowl (confirming to BIS-14735-99) ISI marked of Finolex / Victus / Prince including fixing with approved adhesive complete, within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

150mm (One hundred ten milimetres) diametres (confirming to BIS-14735-99)

120mm (One hundred ten milimetres) diametres (confirming to BIS-14735-99)

75mm (Seventy five milimetres) diametres (confirming to BIS-14735-99)

Providing and fixing 110 x 90mm (One hundred ten into Ninety milimetres) P.V.C. I.S.I. marked floor trap of Finolex / Vectus / Prince ISI marked (confirming to BIS-14735-99) of self cleaning design including with approved adhesive cost of cutting and making good walls and floors complete, within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) Orissa Pattern No 20090 size 53 X 41 cm (fifty three into forty one centimetre) of Hindware /Cera /Jaquar of star white / snow white shade (Earth work, bed concrete,foot rest and trap to be measured and paid for separately) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing W.C. Of Star S no 20024 (S- 10) of size 82 X 38 X 70 Cm (Eighty two into thirty eight into seventy centimetre) of Hindware /Cera/ Jaquar of star white / snow white shade vitreous china wash down closet (European type W.C. pan) with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) (seat cover and jet spray to be measured and paid for separately) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing E.W.C. of OPAL No. 92006 of size 66.5 X 40.5 X 71 Cm (Sixty six decimal five intoforty decimal five into seventy one centimetre) of Hindware /Cera/ Jaquar of star white / snow white shade vitreous china wash down closet (European type W.C. pan) with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) (seat cover and jet pressure to be measured and paid for separately) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing PVC coloured/white with (dual flushing system) 10.00 Ltrs (Ten litres) capacity low level flushing cistern (Sleek Plus) Hindware/cera/Jaquar of star white / snow white shade with fittings such as lead valve less siphon, 15mm (Fifteen milimetres) nominal size PVC ball valve with polythene float, with flush buffor, unions and couplings for connection with inlet, outlet and over flow pipe, 40mm (Forty milimetres) diametres C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing G.I. inlet connection pipe for each flush pipe with W.C. pan within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing plastic seat solid type and cover of Hindware/cera/Jaquar of star white / snow white shade for wash down water closet with C.P. brass hinges and rubber buffers (white plastic seat and cover) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin Delta No.10010 of Cera / Hindware 55x40 CM (fifty five into forty centimetre) with single hole for pillar tap with pedestal including C.I. or M.S. brackets, painted white including cutting holes and making good the same but excluding fittingswithin all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing artificial marble bath tub of standard size with handles including integral over flow and with a pair of 20 mm C.P. Brass pillar taps, 40 mm C.P. brass waste, 32 mm C.P. brass overflow, C.P Brass chain with 40 mm rubber plug, 4 0mm M.I. or C.P. Brass trap with Union complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin OPAL No.10082 of Cera / Hindware 67x51cm (sixty seven into fifty one centimetre) (under counter basin) Hindware / cera / Jaquar of star white / snow white shade with single hole for pillar tap including C.I. or M.S. brackets, painted white including cutting holes and making good the same within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china urinal large flat back No of 600012 of size 390 x 375x590mm (three hundred ninety into three hundred seventy five into five hundred ninety milimetres) size Hindware / Jaquar of star white / snow white shade connection with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately) within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing stainless steel kitchen sink size 610 x510 mm (six hundred ten into four hundred sixty millimetre) with bowl depth 200 mm (two hundred millimetre) of AMC unik / diamond approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted including cutting holes and making good the same but excluding fitting within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetre) dia C.P. Brass shower rose with 15mm (fifteen millimetre) inlet within all leads, lifts of materials and other incidentals

Providing and fixing 32mm (Thirty two millimetres) nominal size diametres rubber plug for wash basin within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) nominal bore PVC connection pipe with brass union 45cm (Forty five Centimetres) length within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing Mixer for kitchen sink with casted swinging spout at top of Jal / ESS/Jagur i.c. fittings in all respect within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters PVC waste pipe for wash basin or sink complete. within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing two hole basin mixing Faucet complete. within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal for gully floor or Nahni trap within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 150mm nominal bore/diameters.(to level or slopes) PVC pipes grade 'A' of finolex / vectus/ prince having working pressure not less than 6kg/cm2 jointing with approved adhesive ncluding testing of pipes and joints complete within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing wall mixing faucet for shower and bath with overhead pipe (1210cm) and bath shower complete within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty milimetres) bevelled edge mirror of modiguard / actual mounted on 6mm (Six milimetres) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty milimetres) C.P. brass Towel rail of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal.brackets fixed to wooden plugs within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws :-Plastic containers within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of jal as per direction of Engineer-in-Charge, within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing C.P. jet spray of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal of approved quality and colour with one metre tube within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametre nominal bore chromium plated ISI marked fancy bib tap of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of jal complete in all respect with necessary fittings with in all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametre C.P. stop cocks of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres C.P. brass pillar tap with capstan Head of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres C.P.brass angle valve without nuts of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal as per approved drawing and design directed by the Engineer-in-Charge within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) nominal bore C.P. brass full way valve with wheel, of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) nominal bore C.P. brass valve (Horizontal plunger) type High pressure with polythene plastic floats of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing PVC connection pipe with brass unions ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore complete. within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres C.P brass waste for wash basin and sink of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal waste for wash basin or sink complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing P.V.C single equal branch with oval access door of Finolex / Vectus / Prince insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive. complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

150mm (One hundred ten milimetres) diametres

110mm (One hundred ten milimetres) diametres

Providing and fixing P.V.C double equal branch with oval access door of Finolex / Vectus / Prince insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive. complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

150mm (One hundred ten milimetres) diametres

110mm (One hundred ten milimetres) diametres

Providing and fixing P.V.C Plain bend of Supreme/Finolex/Prince including fixing with approved adhesive complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

150mm (One hundred ten milimetres) diametres

110mm (One hundred ten milimetres) diametres

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

150mm (One hundred ten milimetres) diametres

110mm (One hundred ten milimetres) diametres

Providing and fixing PVC offset 45° ISI marked including fixing with approved adhesive etc. complete. complete including fixing with approved adhesive etc. complete..within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

150mm (One hundred ten milimetres) diametres

110mm (One hundred ten milimetres) diametres

Providing and placing water tank make P.V.C. SINTEX three layer having capacity of 1000 (One thousand) liters each tank with necessary fittings including over flow pipe scour pipe etcetera and pads required for in let and out let ball valve with cover and locking arrangements complete in all respect within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (1 Cement : 4 Sand : 8 graded stone aggregate 40mm nominal size ) bedding for stoneware pipes of the following internal diameters,necessary form work and curing complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6(1 Cement : 3 Sand : 6 graded stone aggregate 40mm nominal size ) in haunching of S.W . pipes of the following internal diameters, including concrete for beddings necessary form work and curing complete complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreous China pedestal for wash basin Delta No. 1.010 of size 55x40mm (Fifty five is to forty milimetres) complete recessed at the back for the reception of pipes and fittings within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating of suprior quality for gully floor or Nahni trap within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 600x120mm (six hundred into one hundred twenty millimetre) glass shelf of Modi guard / flout saint / sant gobind / Aashai (Heavy duty makes ISI marked) brackets and guard rail complete fixed to plugs with C.P. brass screws within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing Tooth brush and Tumbler holder (Vitreous China) of Hindware/Cera/Taguor i/c necessary fittings complete in all respect within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8 (One cement isto Four sand isto Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including C.I. cover with frame (light duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8 (One cement isto Four sand isto Eight graded crushed/broken stone aggregate 40mm (Forty milimetres nominal size) inside plastering 15mm ( Fifteen milimetres) thick with cement mortar 1:3 ( One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement: Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 1.00 mtrs(One metre) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Constructing brick masonry chamber for under ground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5(One cement: Five sand) C.I. cover with frame(light duty) 455x610mm(Four hundred fifty five into Six hundred ten milimetres)internal dimensions total weight cover and frame to be not less than 38Kgs (Thirty eight Kilograms) weight of cover 23 Kgs (twenty three kilograms)and weight of frame 15 Kgs (Fifteen kilograms) RCC top slab with 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres nominal size) foundation concrete 1:5:10 (One cement: Fiver sand: Ten graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm ( Fifteen milimetres) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement on walls and bed concrete etc. complete inside dimensions 455x610mmx450mm (Four hundred fifty five into Six hundred ten into Four hundred fifty milimetres) deep within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing polythelene aluminum polythelene (PE- AL-PE) composit end seal compression fitting as per IS-15450 of kitec for cold water supply e.g. tees, elbows, reduser,connceters,couplers and claps jointing testing and fitting complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Equal Tee (1620)

Equal Tee (2025)

Female elbow(1620 X 15mm thread)

Female elbow(1620 X 20mm thread)

Female elbow(2025 X 25mm thread)

Female branch tee(1620x1620 x20 mm thread)

Female branch tee(2025x2025 x25 mm thread)

Male thread connecter (1620 X15mm thread)

Male thread connecter (2025 X25mm thread)

Reducing Tee 1620x all branches

Reducing Tee 2025x all branches

Coupler 1620

Coupler2025

Reducer1620x1216

Reducer2025x1216

Reducer2025x1620

Providing and fixing polythelene aluminum polythelene (PE- AL-PE) composit end seal compression fitting of kitec 15450 for hot water supply e.g. tees, elbows, reduser,connceters,couplers and claps jointing testing and fitting complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Equal Tee (1620)

Equal Tee (2025)

Female elbow(1620 X 15mm thread)

Female elbow(1620 X 20mm thread)

Female elbow(2025 X 25mm thread)

Female branch tee (1620x1620 x20 mm thread)

Female branch tee (2025x2025 x25 mm thread)

Male thread connecter (1620 X15mm thread)

Male thread connecter (2025 X25mm thread)

Reducing Tee 1620x all branches

Reducing Tee 2025x all branches

Coupler 1620

Coupler2025

Reducer1620x1216

Reducer2025x1216

Reducer2025x1620

Providing and fixing 600x300mm (Six hundred into Three hundred milimetres) vitreous china division plate for urinals of Hindware /cera/Jaquar of star white / snow white shade i/c necessary fittings in all respect within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 15 mm nominal bore in trenches, galvanised mild steel tubes (medium grade), tube fittings of TATA/Jindal (earth work in trenches to be measured and paid separately) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 20 mm nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) of Tata/Jindal tube fitting and clamps including making good the wall, ceiling and floor complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Supplying cast iron cover without frame for manholes for frame of 500mm internal diameter C.I. cover (medium duty) the weight of cover to be not less than 58kg.within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Supplying cast iron cover without frame for manholes for frame of internal dimension 455mmx610mm rectangular C.I. Cover (light duty single seal pattern-1) the weight of cover to be not less than 23kg.within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Ashwani Kumar Aggarwal

RAKESH RANA

Naresh Padiyal