REPAIR/REPLACEMENT OF FLOORING PLINTH PROTECTION PLUMBING JOINERY AND PLASTERING ETC OF TOILETS AND KITCHEN IN MD ACCN OF ZONE B AREA AT MILY STN RAIWALA

Amount

Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone agg as in Roof padding and similar work incl finishing the concrete surface even and smooth all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:4) complete all as specified and directed.

M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded agg) as in floors and finished concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for 38mm wide glass dividing strips, 3mm thick inserted in position conforming to design complete all as specified and directed.

M & L for Machine cut Kota stone 18 to 20 mm thick laid over and including 20 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with mixed with pigment to match the shade of the slab including rubbing and polishing complete up to deserid finish all as specified and directed.

M & L for Kota stone slab 18 to 20 mm thick as in riser of steps, skirting , dado laid over and including 15mm thick rendering in CM 1:4 all as specified and directed.

M&L for 75mm thick cement concrete, type C2, 1:3:6 (using 40mm graded agg) as in plinth protection, path etc and finished surface even and smooth without using extra cement complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames complete all as specified and directed.

All as per item No 11 above but nexc 1.50 sqm each

Taking down shutters of any description exc 1 sqm and n exc 2 Sqm each

Taking down shutters of any description n. exc 1 sqm each

M&Lfor second class hard wood (SAL) plain solid, straight chowkats, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L for Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated factory made 35 mm thick

S&F 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Pt-I, section-8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass gauze etc divided into squares with pain, chamfered or rounded, mitered and rebated sash bars any number and edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Pt-I, section-8, Clause 8.24(b) and fitted to chowkats complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F 100mm size mild steel butt hinges medium weight, cold rolled complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 300 mm long all as specified and directed.

S&F Aluminium handles, cast type, anodised 150 mm

S&F 300 MM ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed

M&L for mild steel work for small articles such as clamps, hold fasts, ties etc conforming of Fe-290 Gde E-165 complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified and directed.

All as per item No 28 above but fixed in repair

S&F Steel windows with side hung double shutters including projecting type hinges with steel handle,bolt and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Hacking out old broken galss (any thickness, size, quality or description) from wooden/metal frames or stone concrete or brick surfaces, glazed with putty or fixed with beads complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of redoxide on newly steel surfaces of any description over 10 cm width or girth incl preparation of Steel surfaces complete all as specified and directed.

All as per item No 33 above but but one coat on old steel surface

M&L for two coats of synthetic enamel paint over one coat of wooden pink primer on wooden surface of any description not otherwise described over 10 cm width or girth incl preparation of new wooden surface complete all as specified and directed.

Taking down cement plaster on walls of any description including racking out joints, hacking for key scrubbing down with water etc complete al as specified and directed,

M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 on walls complete all as specified and directed.

M&L for rendering 12 mm thick on other than fair faces of brick work in CM 1:6 on walls complete all as specified and directed.finished even & smooth

All as per item No 38 above but on ceiling in CM 1:4, 10 mm thick.

M&L for preparation of (plastered/unplastered) new surface of walls including cornices and applying three coat of white wash complete all as specified and directed.

All as per item No40 above but one coat on old surface of wall.

M&L for preparation of (plastered/unplastered) new surface of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for preparation of (plastered/unplastered) new surface of wall and applying two coats of cement base paint complete all as specified and directed.

Dismantling water tanks and removing to store Exc 250 ltr but Nexc 500 ltr capacity.

Dismantling water tanks and removing to store Exc 500 ltr but Nexc 1000 ltr capacity.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 ltrs all as specified in SSR Pt-I.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 ltrs all as specified in SSR Pt-I.

S&F Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, 20 mm bore

Taking up or down 20mm bore steel tubing and connections, incl cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, incl cleaning for refixing or removal to store complete all as specified and directed.

S&F 20mm bore steel tubes medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as sepcified and directed.

S&F 15mm bore steel tubes medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as sepcified and directed.

S&F 15mm bib tap cast copper alloy long body chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm angle valves, cast copper alloy chromium plated fency type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed.

Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixedbut fancy type, chromium plated with long shank and cup (concealed type) 15 mm

S&F in repair CP Swivel shower for fixing with 15mm pipe (Minimum weight 40gms)

S&F in repair vitereous china squatting pan Orrissa pattern, size 580 x 440mm white with integral foot rests (excluding flushing cistern and flush pipes) incl provision of lime concrete bedding complete all as specified and directed.

S&F PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and connections to pipes of capacity 10 lts complete all as spepciified and directed.

S &F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required 100 mm.

PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors 110 mm bore

S& F PVC SWR bends any radius 110 mm bore

S&F PVCSWR branch piece Single Y equal or unequal 110 mm bore.

S&F PVC SWR vent cowl 75 mm bore.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

Dismantling of AC corrugated or semi corrugated sheet in roof coverings, including ridge, complete all as specified and directed.

S & F 0.63 mm galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L & J type hook bolts or coach screw and washers in roof, walls etc with grade of zinc coating 120g/Sqm (class-VIII), complete all as specified and directed.

S & F plain galvanized mild steel sheeting 0.80 mm thick class -VIII in ridge, hips, valley gutter drip & straight flashings to replace the old damage AC sheet ridge complete all as specified and directed.

Dismantling timber scantling 40 Sqm cm and over in section in any position framed work, complete all as specified and directed.

M & L second class hard wood (SAL) in scantling, clean sawn complete all as specified and directed.

M & L for 600 X 600 X 9 mm thick Gypsum board as in false ceiling colour and pattern as approved by AGE(I) including 24 X 24 X .5 mm thick aluminium angle, 38 X 24 X .50 mm thick T-section, 25 X 24 X .50 mm thick T-section use in the frame work including suspension hanger of 4 mm dia GI wire complete all as specified and directed.

S&F Tublular towel /curtain rail 20 mm dia brass chromium plated fixed with brackets all as specified.

S&F brackets for fixing curtain rods brass chromium plated all as specified.

M&L for 9 mm thick Partical board, Medium density flat pressed single line layer type or three layer type with BWR type adhesive fixed with screws to timber frame work complete all a specified and directed

M&L for 25 mm thick flush shutter solid core construction with block board commercial type on both side complete all a specified and directed

S&F continuous(piano) hinges, mild steel bright finish or electrogalvanised complete all a specified and directed

S&F 100 mm Hasp and staple , mild steel ,wire type stove enamelled black including bolt to hinge plate and fixed with srews complete all a specified and directed

Refixing of door exc 1 Sqm and not exc 2 Sqm on same opening.

S&F0.9 mm thick decorative laminate type 1 of surface finish colour and pattern as approved fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed

M&L for demolition of brick work built in Cement Mortar complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in cement mortar 1:6 straight or curved on plan exc. 6.00m mean radius with old size bricks complete all as specified and directed.

S&F GI wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal stdduing ,joist ets inwall ceiling beam stanchions etc including all laps cutting and waste complete all as specified and directed.

M&L rendering 15mm thick 1:4 CM as in patches n exc 5 sqm each including taking down old and jointing new to old as required complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fancy type 15 mm bore

Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets in repair

M&L for 20 mm thick Granite (of any type ) slab in kitchen cooking Plateform and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match the shade of granite including polishing completeall as specified and directed

S&F in repair Stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 495 mm x 420 mm with bowl size 410 mm x 330mm x 160 mm complete all as specified and directed.

M & L for precast cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate as in slab for kicthen plateform, drain covers with plain fair faces, set in cement mortar(1:4), complete all as specified and directed.

Demolition of RCC any description in any position all as directed.

M&L TMTsteel deformed bar 6 to 8 mm dia cut to length bent to shape required including cranking bending hooking ends and binding with MS wire not less than 0.90 mm

M & L rendering water proof 10mm thick on fair faces of brick work or concrete surface of wall in CM 1:3 finished fair and even all as specified and directed.

M&L for cleaning of roof slab including picking, sweeping clean and washing down with water to remove dust, dirt etc and providing roof treatment complete all as described in the following process after the surface is completely dried : -

(b) M&L for applying evenly one coat of polymeric modified bituminious primer @ 0.30Kg/Sqm all as specified.

(c) M&L for providing APP based 5 layer polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application as per manufactur's instruction and shall be applied by authorised person of the company complete all as specified and directed.

(d) M&L applyling a coat of polymeric modified bitumen 85/25 @ 1.20 Kg/Sqm and finishing the top surface by two coat of alluminium paints@ 0.10 Kg/Sqm.

(e) M&L for carrying out test by filling of water for conteneous 48 hours and providing plaster template of size 450x450mm,10mm thick in CM 1:4 and engraving CA No/Firm name/date all as specified and directed.

Supply only water proofing compound.

AJAY KUMAR CONTRACTOR

TARUN ENGINEERING WORKS

AMARJEET SINGH AND CO.

M/S Manmohan Singh Anand