R/M / Addition/Alteration in existing community and public toilets at different location of DMC jurisdiction.

Amount

Providing and laying cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 40mm nominal size) excluding cost of centring and shuttering in Foundations and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing vitreous china wash down water closet (European type W.C. pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1( 1 cement : 1 sand) (seat and cover to be measured and paid for separately) Ordinary closet: including carriage of material in all leads and lift and direction of Engineer-in-charge.

PTMT Coloured / white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing in position with clamps etc. 32mm nominal internal dia meter galvanised steel tube flush pipe for high level flushing cistern includings connecting the flush pipe with cistern and cleset and making good the walls and floors. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing PTMT jet spray of approved quality with 1.5 mtr. Tube including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing C.P. stop cock 15mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing PE-AL-PEcomposite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing MI union 32mm dia for wash basin including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) : 15mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

Making connection of galvanise distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings: flat back 550mmx400mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing to wall ceiling and floor (I) C.P Brass bib tap with Capstan head 15mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing C.P. connection pipe with brass union 45 cm length 20mm nominal bore including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing mixer for wash basin 15 mm nominal bore with top / bottom swinging spout including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing G.I./M.I Union of following sizes (where not included in the items 15mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 75 mm dia.high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 110 mm dia. high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

110 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

75 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 30/45 cm long PVC connection pipe 15mm nominal bore including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers a white plastic seat and cover solid type including carriage of material in all leads and lift and direction of Engineer-in-charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint.In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top,bottom and sides with required PVC/neoprenefelt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanicallywhere ever required including cleast angle, aluminium, snap beading for glazinge/panellingC.P. brass/stainless steel screws. All complete as per architectural drawings and the directionsof Engineer-In-Charge. For doors windows and ventilatiors and glazed partitions frames including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete. 250mmx16mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. 125mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing glazing in aluminium door, window,ventilator shutters and partition etc with PVC/neoprens gasket etc.completeas per the architectural drawings and the directionsof Engineer-In_charge (cost ofaluminium snap beading shall be paid in basic item.)glazing with glass panes of 4mmthickness (weight not less than 10.00 kg/sqm. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing exhaust fan of Havells or its equivalent 300mm complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing PVC water storage tank of ISI : 12701 marked,G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto a height of 10 metres above ground level1000 litres net capacity tank including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing vitreous China bowlpattern urinal including connection the urinal with waste pipe by means of white lead mixedwith chopped hemp (waste pipe to be measured and paid for separately.Angle back type of size 370mm x430mm x 340mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 5 litres net capacity. PTMT Coloured / white automatic flushing cistern with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured andpaid for separately including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing PTMT urinal waste coupling of approved quality and colour 32 mm nominal bore including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China including carriage of material in all leads and lift and direction of Engineer-in-charge.

mitul shukla