Providing outdoor lights for illumination within the premises of MTB ST Girls Hostel attached to MTB Girls HS school Agartala West Tripura

Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with wooden switch board with bakelite cover and piano type switch including connection etc as required:-

Short Point :-

Medium Point :-

Long Point :-

Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required.

2 X 2.5 sq mm

2 X 4 sq mm

4 X 6 sq mm

Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:-

1 X 1.5 sq mm

Supplying and fixing of the following PVC casing capping with all accessories etc. as required.

Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required.

Supplying and fixing of the following electrical accessories including necessary connection etc. as required.

16/20 amps piano type switch

3/6 pin 16/20 amps piano type socket

Electronic 4 step mini fan regulator

32 amps DP kit kat switch:-

Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-

Surface mounted box type batten suitable for single 18/20 watt integrated LED tube lamp (without lamp):-

Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):-

45 watt LED street light fixture with integral driver and secondary lens (IP 66):-

60 watt LED street light fixture with integral driver and secondary lens (IP 66):-

90 watt LED street light fixture with integral driver and secondary lens (IP 66):-

120 watt LED street light fixture with integral driver and secondary lens (IP 66):-

120 watt LED flood light fixture with integral driver and secondary lens (IP 66):-

Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:-

18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100lm/watt):-

12 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-

Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required

3 core 4 Sq mm

Excavation of earth for cable trench of 800mm depth & 300mm width in all kinds of soil including back filling of cable trench with the excavated soil with 20cm layer of sand, 3.5 nos bricks per metre for protection including ramming, consolidating to the original shape as per dirrection of Site Engineer :-

Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:-

100 amps 415 volts four strip Copper busbar chamber 6 ways of size (610mmx410mmx120mm):-

Supplying and installation of Switch disconnector fuse unit (main switch) of the following ratings with all accessories including necessary connection etc. as required:-

100 amps 415 volts TPN main switch (rewireable):-

Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:-

6 to 32 amps SP MCB:-

Supplying & installation of isolators of following ratings in the existing MCB DB including connection etc as required:-

40 amps DP isolator:-

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more

Centering shuttering including struttings, propping etc. and removal of form work for: Foundations, footings, bases for columns etc. for mass concrete with timber plank:-

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size):-

6 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete. In cement mortar 1 : 4 ( 1 cement : 4 fine sand ):-

Neat cement punning:-

Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required:-

40 mm dia

Supplying and fixing of thermoplastic cable junction box with connectors suitable for following sizes cable : -

1.5 sqmm - 4 sqmm Cable:-

Supplying and fixing of the following sizes wooden switch boards with 3mm thick bakelite cover etc. as required.

152mm x 203mm (6" X 8") :-

Please Enable Macros to View BoQ information