REPAIR TO INTERNAL WATER SUPPLY, PLUMBING WORK, SANITARY FITTINGS, CLEANING OF WATER TANKS and OTHER MISC WORKS AND DESLUDGING CLEANING AND REPAIR TO SEWAGE LINE/SOAKAGE WELL/SEPTIC TANKS IN ZONE-II III AT BARAMULLA.

Amount

Disconnecting existing tanks, not exc 500 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position and incl Cleaning and removing all scale and dirt etc: from the tanks and from mouth of circulating pipes etc complete and finally washing the tanks with clean water and bringing the tank to a position for storing clean water including writing the date of cleaning on the outer surface of the tank by paint, letters of 3cm height and width including obliterating old writing all as specified and directed for HDPE /PVC water tanks capacity not exc 500 litre complete all as specified and directed by engineer-in-charge. Note: (i) The tank is to be cleaned by using Alum and bleaching powder solution. (ii) The wire brush is to be used for cleaning of water tank.

Disconnecting existing tanks, not exc 1000 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position and incl Cleaning and removing all scale and dirt etc: from the tanks and from mouth of circulating pipes etc complete and finally washing the tanks with clean water and bringing the tank to a position for storing clean water including writing the date of cleaning on the outer surface of the tank by paint, letters of 3cm height and width including obliterating old writing all as specified and directed for HDPE /PVC water tanks capacity not exc 500 litre complete all as specified and directed by engineer-in-charge. Note: (i) The tank is to be cleaned by using Alum and bleaching powder solution. (ii) The wire brush is to be used for cleaning of water tank.

Dismantling of water and removing to store capacity 500 litres and S&F 500 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 15mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed complete all as specified and directed by engineer-in-charge.

Dismantling of water and removing to store capacity 1000 litres and S&F 1000 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed complete all as specified and directed by engineer-in-charge.

Taking up or down 15mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store and S & F 15 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed by engineer-in-charge.

Taking up or down 20mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store and S & F 20 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed by engineer-in-charge.

S&F in repair Gun-metal, globe or gate valves ISI marked, 15mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed by engineer-in-charge.

S & F in repair Gun-metal, globe or gate valves ISI marked, 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed by engineer-in-charge.

S & F in repair Ball valves 15mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (minimum weight -142 gms) complete all as specified and directed.

S & F in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (minimum weight -210 gms) complete all as specified and directed.

S&F in repair PVC covers of PVC/HDPE water tank suitable for 300 ,500 ,750 ,1000&2000 ltrs capacity including all necessary fixing arrangement complete all as specified and directed by engineer-in-charge.

M&L for Lagging 15mm dia pipes used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 kg/cum conforming to IS 9842 complete all as specified and directed by engineer-in-charge.

M&L for Lagging 20 mm dia pipes used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 kg/cum conforming to IS 9842 complete all as specified and directed by engineer-in-charge.

S&F in repairs CP Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and directed by engineer-in-charge.

S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed by engineer-in-charge.

S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by engineer-in-charge.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup (concealed type), complete all as specified and directed by engineer-in-charge.

S&F in repairs flexible jet shower, 25mm dia including CP flexible pipe 1.20m long heavy duty and hook incl all necessary fittings complete all as specified and directed by Engineer-in-Charge.

S&F in repair two -in- one tap cast copper alloy chromium plated fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by engineer-in-charge.

S&F in repair Brass CP wall mixer for mixing hot&cold water screwed down for iron pipe and fixed in repairs complete all as specified .

S&F in repair sink mixer for mixing hot & cold water screwed down for iron pipe and fixed. Complete all as specified and as directed complete all as specified and directed by engineer-in-charge.

S & F in repair wash hand basin brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed. complete all as specified and directed.

S&F in repair toilet paper holder, brass chromium plated, fixed to walls with chromium plated brass screws complete all as specified and directed by engineer-in-charge.

S&F in repair soap dish, chromium plated, fixed to plugs with chromium plated brass screws complete all as specified and directed by engineer-in-charge.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM (1:4) to dwarf wall or incl fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by engineer-in-charge.

S&F in repairs Vitreous China wash basin, white/coloured, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and directed by engineer-in-charge.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) complete all as specified and directed by engineer-in-charge.

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) complete all as specified and directed by engineer-in-charge.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets complete all as specified and directed by engineer-in-charge.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by engineer-in-charge.

S&F in repairs 125mm size brass chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed by engineer-in-charge.

S&F in repair Cast iron Nahani trap 100mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by engineer-in-charge.

M&L cleaning/function of existing sewage system and pumping station (comprising of sewage lines in SGSW pipes, hume pipe and CI pipes) of any dia at any depth, manholes septic tanks and soakage wells of different types of sizes any in any position i.e. below or above ground level, located in different situations and also on the surfaces of the wall etc complete in perfect function/running/flowing condition without any obstruction by removing all blockage in system and including removing of all wastes solid or liquid of any description (cleaning /removing blockage of water cosets, urinals, wash hand basin, sinks, kitchen & bathroom floor/nahani trap and gully trap etc including cleaning of drain pipes of any description & size (rate includes for removing off MH covers & placing the same in position after cleaning by rodding/choke remover or by any other suitable means manually as in foul condition in the entire area of works under AGE B/R-I. Complete all as specified and as directed.NOTE:- (i) Employing daily one sweeper and one helper (safai wala) who report everyday and they will cater to the sewage complaints fo the entire sub division as per above items including convenyance of workers as per work order/complaint slip. (ii) The above mentioned individuals to look after the sewage complaints of the entire locations as directed by concerned executives and shall report daily reporting the sub division office. (iii) The contractor shall be entirely responsible for the accident/risk insurance poicy of the each worker who are empoying in sewage cleaning worker. (iv) No Payment shall be released without payment proof of minimum wages to the workers is produced and engineer-in-charge shall be responsible for payment of minimum wages to the workers

M&L for Sucking of sewage/human waster from the septic tank soakage well manholes with the help of vehicle mounted honey sucker machine and disposed outside the MOD land complete all as specified and directed by engineer-in-charge.

Taking down PVC/CI pipes any type and size incl all fittings complete all as specified and directed by engineer-in-charge.

S&F PVC (SWR) pipes 75mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by engineer-in-charge.

S&F PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by engineer-in-charge.

S&F PVC (SWR) bends any radius 75mm dia complete all as specified and directed by engineer-in-charge.

S&F PVC (SWR) bends any radius 110mm dia complete all as specified and directed by engineer-in-charge.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75mm dia complete all as specified and directed by engineer-in-charge.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia complete all as specified and directed by engineer-in-charge.

S&F Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 75 mm bore pipe complete all as specified and directed by engineer-in-charge.

S&F Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and directed by engineer-in-charge.

M/S HAJI MOHD ASHRAF SUMJI

M/S GHULAM RASOOL LONE AND SONS

M/S GHULAM NABI KHUROO AND CO