Providing of three Phase LT Connection to the G 1 Load bearing wall type structure at CUK Main Campus Tulmulla Ganderbal

Supply, Loading, Transportation, insurance, Unloading, Carriage and Delivery at Site and erection of 9 Mtr. Long ST Poles with pit excavation [IS 2713 410 SP 33]

Supply, Loading, Transportation, insurance, Unloading, Carriage and Delivery at Site and erection of 11 Mtr. Long ST Poles with pit excavation [IS 2713 410 SP 56]

Providing and fixing of GI V Cross Arm with Top Bracket including Clamp and GI Channel X-Arm including Clamps & Braces

Providing, Loading, Transportation, Insurance, Unloading, Carriage and Delivery at Site , Laying Stringing & Binding of Conductors including joints of required size 200 mm Sq AAA Conductor

Providing & Fixing of PG/ T Clapms for 200 mm Sq AAA Conductor

Supply, Installation, Testing and Commissioning of 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Supply, Installation, Testing and Commissioning of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Supply, Installation, Testing and Commissioning of Galvanized Nuts and Bolts of sizes.

Providing & fixing of Danger Plates with Clamps

Providing & fixing of Anti Climbing Device with Clamps

Providing & fixing of Earthing Complete with GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long threough GI Strip

Providing and painting of 9 Mtr ST poles with two coats of red oxide and two coats of aluminium paint

Providing and laying of Cement Bottoming in 1:2:4 mix 0.6 cum per pole

Supply, Installation, Testing and Commissioning of Aluminium Jointing Sleeves

Providing & fixing of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2No..), anchor plate (300x 300 x 8 mm), nut-bolts, 2 No. turn-buckles, 1.8m long, 20 mm diameter solid GS stay rod & 7/4.00 mm dia GI stranded wire complete

Providing & fixing of Guard Netting

Supply, Installation, Testing and Commissioning of a) Battery Bank 30 V, 100 AH, of 15 No Cells of 2 V each, Sealed maintenance free VRLA type, High impact Polyprophelene Copolymer container, flame retardant. B) 30 V, 100 AH, Float-Cum-Boost Charger with full Wave rectification for 220 V, 1 Phase, 50 HZ AC Input Supply

Supply, Installation, Testing and Commissioning of Distribution Panel (30 V, DC) of CRCA thickness not less than 2mm. Powder Coated, degree of protection IP43 for 2 No Battery incoming Supply with 2 No 63 Amps DP MCBs fort incoming supply Dopuble busbar of adequate size, 12 No DP DC MCB (0-32A) including indication Lamps and Cables and other accessories

Supply, Installation, Testing and Commissioning of Distribution Panel (415 V, AC) of CRCA thickness not less than 2mm. Powder Coated, degree of protection IP43 . 200 Amps Switch Fuse disconnector for incoming supply and 5 No TPN MCB's (16-125 Amps) and 5 No DP MCB's (0-32A) rectangular Busbar suitable for 200 Amps continous supply including indication Lamps and Cables and accessories

Providing and fixing of GI Angle make Battery bank and Charger Strand Structure including Cutting, Bending, Drilling, Welding etc

Supply, Installation, Testing and Commissioning of 4- Core 2.5 mm Sq Control Cable Copper Armoured, 1.1 KV Grade, ISI, FRLS

Supply, Installation, Testing and Commissioning of 630 Sq mm XLPE LT Underground Cable Single Core

Supply, Installation, Testing and Commissioning of 630 Sq mm Aluminium Lugs

Providing & Laying of HDPE Pipe 90mm/78mm in underground by way of exccavation upto 2.5 feet deep and 1.5 feet wide and its backfilling complete job

Providing and fixing of Heat Shrinkable multi Coloured sleeves and cable end terminations suitable for 630 Sq mm

Providing and fixing of GI Perforated Cable trays with allied accessories

Supply, Installation, Testing and Commissioning of LT Distribution for Cable and termination within Inbuilt Bus-Bars of 800 A for 3P-4W system withn indicators and 630 A adjustable microP, Based with spreaders and suitable cut out with glands

Dismentalling of existing Battery Bank and charger with allied wiring and its carriage upto dumping site

Setting right of tilted/displaced alignment poles by way of excavbating from a side and re-aligning including Dismentalling of allied accessories and re-fixing complete job

Supply, Installation, Testing and Commissioning of 33 KV Lightening artrestors (33KV, 10KA, Station Class, ZnO, Polymer) Gapless (1 No per phase)

Providing and topping of Transformer Oil

Filtration of existing transformer Oil in 1 MVA Power Transformer

M/S WATT ELECTRICAL CONTRACTS

M/S SALIQ TRADERS