Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.1 LAccepted-AOC | ₹11.1 L Quoted ₹12.5 L | L1 | Accepted-AOC LOWEST |
| 2 | L2₹12.5 L+₹4,900 (0.39%)Rejected-Finance | ₹12.5 L+₹4,900 (0.39%) | L2 | Rejected-Finance OTHER THAN LOWEST |
| 3 | L3₹12.6 L+₹17,100 (1.37%)Rejected-Finance | ₹12.6 L+₹17,100 (1.37%) | L3 | Rejected-Finance OTHER THAN LOWEST |
| 4 | L4₹14.0 L+₹1.5 L (12.2%)Rejected-Finance | ₹14.0 L+₹1.5 L (12.2%) | L4 | Rejected-Finance OTHER THAN LOWEST |
| 5 | L5₹14.3 L+₹1.9 L (14.9%)Rejected-Finance | ₹14.3 L+₹1.9 L (14.9%) | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
Refer Docs
EMD Value
₹34,000
Closing Date
10 Dec 2020, 6:00 pmClosed
GE SAMBA
GE SAMBA
REPAIR TO SUBMERSIBLE PUMP CENTRIFUGAL PUMP MONOBLOCK PUMP AND ALLIED WORKS AT WATER SUPPLY INSTALLATIONS UNDER AOR OF GE SAMBA
2020_MES_394481_1
GE/SMB/T-48/2020-21
Open Tender
Civil Works - Water Works
Item Rate
240 days
SAMBA
REF NIT
8 documents required · 8 mandatory
₹500
Yes
GE SAMBA
₹34,000
Yes
18 Jan 2021
12 Nov 2020
12 Dec 2020
12 Nov 2020
10 Dec 2020
27 Nov 2020
12 Nov 2020 - 16 Nov 2020
Amount
Dismantling or taking up defective submersible pump sets and lowering pipe, flange type of any size of any depth with pump set of any capacities after disconnecting the electric supply by manual or mechanical means and transport to workshop for repair and workshop to sites after repairing, placing, installation, lowering commissioning back to tube well and testing on full load, complete all as specified and directed
De-assembling submersible pumps of capacities suitable for 10 HP to 22.5 HP motor for repair and re-assembling the same after necessary repair/ replacement of old defective/ damaged spare parts, complete all as specified and directed Note: New spare parts and repair for old serviceable spare parts will be measured and paid separately under respective items.
(2a)Gun Metal impeller
(2b)Stainless steel distance sleeve
(2c)Guide bush steel
(2d)Cast iron bowl assembly
(2e)Neck ring brass
(2f)Pump and motor steel coupling with key
(2g)Repair to pump shaft to its original shape by remetaling ,turning, cutting and grinding.
(2h)Diffuser
(2i)Repair to pump bowl to its original shape by seat cutting & grinding
De-assembling submersible motor, three phase, 2900 RPM, 415 Volts, 50 Hz, capacities 10 HP to 22.50 HP for repair and re-assembling the same after necessary repair/ replacement of old defective/ damaged spare parts, complete all as specified and directed Note: New spare parts and repair for old serviceable spare parts will be measured and paid separately under respective items.
(12a)Rotor shaft bush sleeve brass
(12b)Cable seal
(12c)Thrust plate bearing set
(12d)Repair to motor shaft to its original shape by remetaling, cutting and grinding.
(12e) Rewinding of burnt/ damaged submersible motor with PVC insulated water proof, annealed solid copper conductor wire of 99.99 % purity of existing specifications and best quality, ISI marked or as per IE specifications, complete all as specified and directed.
De-assembling and removal from foundation the defective centrifugal pumps including gland assembly/ housing, capacity 7.5 to 25 HP send to contractor's workshop for repair and re-assembling, installation, commissioning after necessary repair/ replacement of old defective/ damaged spare parts and greasing to different parts and testing the same pump on full load including one coat of spray painting matching to existing colour complete all as specified and directed. Note: New spare parts and repair for old serviceable spare parts will be measured and paid separately under respective items.
(18a)Gun metal impeller
(18a)Gun metal bush
(18a)Neck ring gland plate
(18a)Coupling set with plate , bush, nuts, bolt and washers.
(18a)Repair to pump shaft to its original shape by remetaling, cutting and grinding.
(18a)Repair to bearing housing to its original shape by remetaling, cutting and grinding.
De-assembling and removal from foundation the centrifugal pumps including gland assembly/ housing, capacity 40 HP send to contractor's workshop for repair and re-assembling, installation, commissioning after necessary repair/ replacement of old defective/ damaged spare parts and greasing to different parts and testing the same pump on full load including one coat of spray painting matching to existing colour complete all as specified and directed Note: New spare parts and repair for old serviceable spare parts will be measured and paid separately under respective items.
(25a)Gun metal impeller
(25b)Gun metal bush
(25c)Neck ring gland plate
(25d)Coupling set with plate, bush, nuts, bolt and washers.
(25e)Repair to pump shaft to its original shape by remetaling, cutting and grinding.
(25f)Repair to bearing housing to its original shape by remetaling, cutting and grinding.
De-assembling and removal from foundation the centrifugal pumps including gland assembly/ housing, capacity 75 HP send to contractor's workshop for repair and re-assembling, installation, commissioning after necessary repair/ replacement of old defective/ damaged spare parts and greasing to different parts and testing the same pump on full load including one coat of spray painting matching to existing colour complete all as specified and directed. Note: New spare parts and repair for old serviceable spare parts will be measured and paid separately under respective items.
(32a) Gun metal impeller
(32b) Gun metal bush
(32c)Neck ring gland plate
(32d)Coupling set with plate , bush, nut, bolt and washers.
(32e)Repair to pump shaft to its original shape by remetaling, cutting and grinding.
(32f)Repair to bearing housing to its original shape by remetaling, cutting and grinding.
De-assembling and removal from foundation the centrifugal pumps including gland assembly/ housing, capacity 100 HP send to contractor's workshop for repair and re-assembling, installation, commissioning after necessary repair/ replacement of old defective/ damaged spare parts and greasing to different parts and testing the same pump on full load including one coat of spray painting matching to existing colour complete all as specified and directed. Note: New spare parts and repair for old serviceable spare parts will be measured and paid separately under respective items.
(39a) Gun metal impeller
(39b) Gun metal bush
(39c) Neck ring gland plate
(39d) Coupling set with plate , bush, nut, bolt and washers.
(39e) Repair to pump shaft to its original shape by remetaling, cutting and grinding.
(39f) Repair to bearing housing to its original shape by remetaling, cutting and grinding.
De-assemble and removal from foundation the centrifugal pumps including gland assembly/ housing, capacity 125 HP,head 150 mtr,speed 1440 RPM ,Rate of flow 31.25 Cub meter/sec send to contractor's workshop for repair and re-assembling, installation, commissioning after necessary replacement of old defective/ damaged spare parts and greasing to different parts and testing the same pump on full load including one coat of spray painting matching to existing colour, complete all as specified and directed . Model no of pump : RKB 125/27 6ST of Kirloskar. Note: New spare parts and repair for old serviceable spare parts will be measured and paid separately under respective items.
(46a) Enclosed impeller
(46b) Impeller key
(46c) Diffuser
(46d) Guide vane for diffuser
(46e) Pump shaft
(46f) Shaft sleeve
(46g) Distance sleeve
(46h) Gland cup
(46i) Coupling set with plate , bush, nut, bolt and washers.
(46j) Bracket
(46k) Neck ring
(46l) Gland plate
(46m) Body bush
(46n) Chuck Nut
De-assembling and removal from foundation the burnt/ non-working induction motors of any make, capacities 10 HP to 125 HP, three phase, 415 Volts, 50Hz send to contractor's workshop for repair and re-assembling, installation, commissioning and testing the same motor on full load after necessary repair/ replacement of old defective/ damaged spare parts, winding from the stator, cleaning the slots including one coat of spray painting matching to existing colour complete all as specified and directed. Note: New spare parts and repair for old serviceable spare parts will be measured and paid separately under respective items.
M & L Rewinding of burnt/ damaged 3 Phase induction motor 1450 RPM, 50 Hz with super enamelled, copper wire of 99.99 % purity, best quality, of existing size specifications and size, incl varnishing, baking & replacement of insulating material ISI marked or as per IE specifications, complete all as specified and directed.
Replacement of old damaged/ unserviceable submersible cable with new submersible cable, flat, PVC insulated and PVC sheathed copper conductor, multi-stranded, 16 sqmm, 3-core, conforming to IS: 694/1990 including making connection to both ends i.e. motor side and starter side with jointing materials, complete all as specified and directed
Replacement of old damaged/ unserviceable submersible cable with new submersible cable, flat, PVC insulated and PVC sheathed copper conductor, multi-stranded, 10 sqmm, 3-core, conforming to IS: 694/1990 including making connection to both ends i.e. motor side and starter side with jointing materials, complete all as specified and directed
De-assembling and removal from foundation to 125/75 HP centrifugal pump-motar set complete and removing nut bolts and iron angle complete and breaking of foundation by any type by hammer , machine and refixing the same after PCC and frame work complete .
M&L Cement concrete in foundations, filling and mass concrete 1:2:4 Type-B 2 using 40 mm graded stone agregate, complete all as specified.
S & F Rolled mild steel in: Fe-290(Gde E-165)Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including nut bolt etc.
Supply and fix FRLS unsheated stranded copper conducter cable size 35 sqmm single core as in connections to MCCB,staters,capicitor bank, change over switiche etc connection to be made with cable terminal lugs and GI screws ,complete all as specified and directed.
All as per item no 68 above but 70 Sq mm single core ,complete all as specified and directed.
Supply and fix of MCCB 63 Amp ,50 KA, TP ,complete all as specified and directed. Make : Standard or equivalent in L&T (D-Sine) ,Havells ,Legrand (ICS=ICU=100%).
Supply and fix of MCCB 100 Amp ,50 KA, TP ,complete all as specified and directed. Make : Standard or equivalent in L&T (D-Sine) ,Havells ,Legrand (ICS=ICU=100%).
Supply and fix of MCCB 160 Amp ,50 KA, TP ,complete all as specified and directed. Make : Standard or equivalent in L&T (D-Sine) ,Havells ,Legrand (ICS=ICU=100%).
Supply and fix of MCCB 200 Amp ,50 KA, TP ,complete all as specified and directed. Make : Standard or equivalent in L&T (D-Sine) ,Havells ,Legrand (ICS=ICU=100%).
Supply and fix of MCCB 250 Amp ,50 KA, TP ,complete all as specified and directed. Make : Standard or equivalent in L&T (D-Sine) ,Havells ,Legrand (ICS=ICU=100%).
Supply and fix of MCCB 400 Amp ,50 KA, TP ,complete all as specified and directed. Make : Standard or equivalent in L&T (D-Sine) ,Havells ,Legrand (ICS=ICU=100%).
supply and fix Rubber flange suitable for 100 mm bore MS column pipe complete all as specified and directed.
supply and fix Rubber flange suitable for 80 mm bore MS column pipe complete all as specified and directed.
Dismantling the defective agetator motor and injector dosing pump of capacity 1 HP for altoch decring dosing plant by striping and opening, cleaning internally and rewinding of motor with super enamelled copper wire of existing size including varnishing with heating motor winding, greasing of bearing bush, repair of terminal plate and refixing in position with necessary replacement of bearing bush, rotor shaft ,nut bolts, washer etc and connection and testing, including one coat of super synthetic enamel paint of approved colour after preparation of surface for 1 HP motor, complete all as specified and directed.
Suply and fix flange pipe 80mm dia 3 meter legth complete all as specified and directed.
Supplying and fixing cast iron sluice valve with both end flanged with iron wheel handle for clockwise closing brass spindle heavy duty PN-1.6 class conforming to IS-14846/2000 including gaskit joint nuts, bolts & washers all as requirement of site incl dismantling and taking out existing unserviceable sluice valves for 80 mm bore complete all as specified and directed.
All as per Item No 80 above but for 65 mm bore.
All as per Item No 80 above but for 150 mm bore.
All as per Item No 80 above but for 200 mm bore.
All as per Item No 80 above but for 50 mm bore.
Supplying, laying, connecting and testing of GI pipe of size 80mm bore medium grade in trenches including fittings complete all as specified and directed. Note: All GI Fittings bend ,elbow,tee ,nipple, union ,reducer etc inclusive in quoted item rate.
All as per Item No 85 above but for 150 mm bore.
supply and fix foot valve 80 mm dia as complete all as specifies and directed.
supply and fix foot valve 100 mm dia as complete all as specifies and directed.
supply and fix foot valve 150mm dia as complete all as specifies and directed.
GIANI ENGINEERING WORKS
Pyramid constructions
SIDDAHANT ENTERPRISES
vivek and co
G.M. ENGINEERING SERVICES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .