PROVN OF BASIC AMENITIES FOR SMQS AND OMQS, PROVN OF MISC E/M WORKS AND CERTAIN MINOR WORKS AT AF STN WADSAR UNDER GE (AF) CHILODA

Amount

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; Flat Ironwelded framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L preparation of new surface and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth complete all as specified and directed.

M & L for Cutting holes in brick walls exc half brick but not exc one brick in built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 including white wash to match the shade/color or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F PVC cabinet with mirror of size 300mmx450mm complete all as specified and directed by Engineer-in-Charge

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on WALLS / CEILING complete all as specified and directed. supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as specified and directed.

S&F PVC waste pipe of 32 mm dia for wash basin/sink complete all as specified and directed

S&F waste coupling of 40 mm dia brass CP for steel sink basins, etc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed complete all as specified and directed

S&F Fancy type CP bib taps 15 mm dia, chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F stainless steel 1 mm thick plate rack of size 750x600x250mm of approved make complete all as specified and directed.

S&F in repairs 25 mm dia stainless steel curtain rod fixing with screw/ nails/ plugs/brackets etc complete all as specified and directed.

S&F glass corner shelf 12 x 12 inch wall mount with 5mm thickness with SS railling complete incl bolt/bracket for securing to wall complete all as specified and directed by Engineer-in-Charge.

S&F solid PVC kitchen cabinets/cupboard made with door frame of size 48x40mm, shutter 18-20mm thick shutter and including 75mm size Stainless steel butt hinges complete all as specified and directed by Engineer-in-Charge.

S&F CP decorative type SS handles 75mm long fixed to PVC sheet or frame complete all as specified and directed by Engineer-in- Charge.

S&F magnetic and connected plate to shutter and frame as per sample complete all as specified and directed.

Taking down and refixing aluminium window/ventillator for repair/replacement of glass/wire guage and making necessary arrangments for fixing of exhuast fan and similar items complete all as specified and directed by Engr-in-Charge

S&F 18mm thick marine plywood fixed with nails/ screws to frame works as in cabinets cupboards with SS angles cleats etc complete all as specified and directed.

All as per item No 17 here in before but 6mm thick complete all as specified and directed.

S&F for decorative laminates of 1mm thick glossy finish, colour and pattern as approved adhesive complete all as specified and directed

S&F for sliding of 5mm thick with hitching four corners with flowers and lines pattern as approved including SS two track sliding chennel with rollers and accessories and fixed to kitchen cabinets complete all as specified and directed.

S&F auto hydrolic spring stainless steel of 300-450mm long for kitchen cabinets as per sample complete all as specified and directed.

S&F for stainless steel accessories grade 202 (make:- V-Boss/ Olive-silver accessories or equivalent as approved by GE) as mentioned below complete all as specified and directed.

(a) Plain basket of size 19''x20''x4''

(b) Plain basket of size 19''x20''x6''

(c) Plain basket of size 19''x20''x8''

(d) Cutlery basket of size 19''x20''x4''

(e) Cup and saucer basket of size 19''x20''x6''

(f) Thali/plates basket of size 19''x20''x8''

(g) Glass Baskets of size 19''x20''x4''

(h) Bottle Baskets size 19''x20''x6''

(j) Partition Baskets size 19''x20''x8''

M&L for brick work sub class B bricks,fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for cement concrete Type C2 1:3:6 (40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

S&F Framed Steel work in tubular section for purlin, rafter, posts and similar items including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M&L Pre- painted. Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F 3 Tier washing system comprising of 3 nos 0.8-1.00 mm thick stainless steel (SS-304) sink chambers with steel frame and legs of size as per manufacturer's instructions (approx size - 60 inch x 24 inch x 34 inch) including provision of necessary water supply pipes & fittings for hot & cold water with 05 Nos long body fancy type bib taps (Cera Cat Part No. F2002152 or techno commercial make as specified) with all necessary fittings & fixtures complete all as specified and fix in position as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including all electrical connection complete all as specified and as directed by Engr-in-Charge.

S & F Bib taps, cast copper alloy of 15 mm bore diawith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase 230V of size 300 mm sweep with, blades and frame and louvers complete all as specified and directed.

M&L for making hole etc for fixing of Exhaust fan including electrical connection complete all as specified and directed.

S & F stop valve, cast copper alloy of 15 mm bore diawith crutch, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

M & L for point wiring complete with FRLS PVC insulated / unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly, drawn through in conduit pipe fixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall only with 3.0mm thick laminated sheet where as required and accessories for One light/fan point controlled by one, one way switch complete all as specified and directed.

S&F Switch piano, single pole one way 5 Amps 240 volt capacity flush type complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep upto 250 mm complete all as specified and directed.

Supply & fix wall mounted fans 230 volts single phase 400 mm sweep suitable for wall mounting. Incl all electrical connection complete all as specified and as directed.

S & F electric auto clean ducted wall mounted kitchen chimny of size 75 (D) x 45(W) 50.6(H) CM and capacity maximum suction 1700 CUM/hr thermal auto clean, oil collector, powdered coated finish made of powdered metal steel with energy efficient BLDC Motor single phase 230 volt with all asscessories complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)including all electrical connection complete all as specified and as directed by Engr-in-Charge.

Supply and fix wall fans, with 5 star rating complete with 230V, 450 mm sweep complete all as specified and directed.

Supply and fix pedestal fans, with 5 star rating complete with 230V, 400mm sweep complete all as specified and directed by Engr-in-Charge.

Supply and fix wall fan mounted fan bracket heavy duty with all accessories complete all as specified and directed by Engr-in-Charge.

M&L for Point wiring with 2.5 sqmm (Nominal area) sheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core FRLS drawn into and 20mm PVC casing capping FRLS wiring, along with 2.5 sqmm sheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof excluding Modular Metal flush box and white cover plate with frame the switches, sockets, fan regulator etc as required suitable for 3 pin socket outlet 5 amps sockets on independent board Modular type fitting /fixture etc complete all as specified and directed.

S & F switch modular 10 amps one way flush type 1 module complete all as specified and directed.

S & F socket modular 2/3 pin 10 amps flush type 2 module complete all as specified and directed.

S & F modular white cover plate with frame 1 module complete all as specified and directed.

S&F Modular Metal flush box 1/2 Module complete all as specified and directed.

S & F modular white cover plate with frame 2 module complete all as specified and directed.

Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in soft/ loose soil for taking up/ laying cable/pipe etc complete all as specified and directed.

Returning, filling including spreding, leveling watering & well ramming in laying not exc. 25cm for soft/ loose soil complete all as specified and as directed.

Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point for soft/ loose soil complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable 1100 volt grade, (FRLS) through and including 20X12 mm PVC casing-n- copping and its accessories, cadmium screws and including 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable(FRLS) as earth continuity conductor and MS boxes made of 16 gauge MS sheet concealed type on walls cover 3mm thick for housing One bell/ buzzer point controlled by one push button point Controlled by one way switch complete all as specified and directed by Engr-in-Charge.

S&F an electric bell ding dong AC 230 volt single pole complete all as specified and as directed.

S&F Bell push piano type, single pole one way 5 Amps 240 volts capacity flush type complete all as specified and as directed.

M&L Fire Alarm Sounders / Sirens Electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of + 5 DB range 1000 mtr testing complete all as specified and directed by Engineer-in- charge.

Supply and fixing DWC High density poythelyne (HDPE) pipes of pressure rating 6kgf/ sq/ m of size 50 mm for cable protection laid in trenches complete all as specified and directed by Engineer-in- charge.

Supply and laying/fixing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (H/D) earthed cable aluminium conductor, 1100 volts grade with standed complete all as specified and directed for 25 sq. mm, 3.5 core nominal cross section in service connections including complete all as specified and directed by Engineer-in- charge.

M & L for boring of holes of req dia under road pavement, hard standing, etc by manully complete all as specified and as directed by Engineer-in- charge.

Supply & fix bus bar chamber of raing 100 Amps TPN factory made dust and vermin proof including bus bar of rectangular cross section of copper strip supported on cast epox insulator at suitable interval heat shrinkable sleeves with powder colour code 01 set of 04 strip of complete with grouting in wall with suitable FI strip bend to shape with PCC work for holding enclouse and complete all as specified and directed by Engineer-in- charge.

S&F 4 way sheet metal enclosures for flush/surface mounting distribution board single door, 415 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed by Engineer-in- charge.

Supply and fixing 415V 10KA 'B' curve TP 63 AMP miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed by Engineer-in- charge.

All as per item No 70 here in before but TPN 32 Amp.

S&F miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP 240V, 10 KA 'B' curve, in the DB Complete with connection testing and commissioning complete all as specified and as directed.

S&F miniature circuit breaker (MCB) of single poles and neutral (SPN) current carrying capacity 32 AMP 240V, 10 KA 'C' curve, in the DB Complete with connection testing and commissioning complete all as specified and as directed by Engineer-in- charge.

Supply and fix exhaust fan, made of sturdy Engineering plastic body complete with louvers shutter, voltage AC single Phase. 230V, 50 Hz of size 300m sweep with, RPM 1200, copper winding, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed by Engr-in-Charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers including all electrical connection complete all as specified and as directed by Engr-in-Charge.

M&L for sub main wiring with 2 runs of 4 sqmm PVC insulated stranded copper conductor FRLS cable and one run of 4sqmm copper FRLS cable as earth lead in suitable PVC conduit complete all as specified and as directed by Engr-in-Charge.

UMIYA BUILDCON (BID ID -3496171)

DMA PROJECTS (BID ID -3496305)

Bharat Enterprise (BID ID -3497159)

AADESH CONSTRUCTION (BID ID -3495056)

ARTI CONSTRUCTION (BID ID -3496792)