Theni District BMenakshipuram Town Panchayat Renovation of SHG Building in BMeenatchipuram Town panchayat

Amount

Dismantling Pressed Tiles including all cost etc..,

Dismantling Wooden Windows and Doors including removal of frames, hinges and fastenings including all cost etc..,

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M.Sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.

Plastering in CEMENT MORTAR 1:3 10mm thick in Including cost and conveyance of materials to site and all other labour charges including etc., as per standard specification.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Plastering in CEMENT MORTAR 1:5 12mm thick in Including cost and conveyance of materials to site and all other labour charges including etc., as per standard specification.

supply and Delivery of steel door inculuding cost and conveyance of all matrialse to site etc Window 1.20 x 1.20

Labour charge for fixing door and window with frame in position etc. complete (finished work) and as directed by departmental officers Window 1.20 x 1.20

Painting two coat over old wall surface with approved quality of Oil bound distember with colour mover okne coat of white cement for priming coat for base including preparation of old colour washing surface and all materials, labour charges etc

Painting two coat over old wall surface with approved quality of Plasitic Emulsion with colour mover okne coat of white cement for priming coat for base including preparation of old colour washing surface and all materials, labour charges etc

Painting TWO coat of enamal paint Old Iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint of approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying with standard specification. (The paint should be got approved by the departmental officers before use on works) Electrical Arrangements

Wiring with 2x1.5sqmm(22/0.3) PVC insulated unsheathed SC. Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall,covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (For electronic regulator) (5 Points Per Coil)(S.D.No.20)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.(S.D.No.36)

Supply and fixing of Tube Light fitting ( LED ) complete with guard suitable for lamp with 40 W bulb with PVC unsheated leads from terminal to the fitting (S.D.No.87)

Supply and Fixing of Fan including all cost etc..,SD106

KLP Constructions (BID ID -1456173)