Clean city, beautiful city (SBM)

Name of Work : Beautification and Development work of dividers and both sides of the road from fuwara circle to gandhi chowk in deesa nagarpalika area

Bill of Quantity

Sr No Item Description Unit Qty Rate Amount in Rs.

Dismantling Tiled Or Stone Floors Laid In Mortar Including Stacking Of Serviceable Material And

Disposal Of Uservicalble Material With All Lead And Lifts.

2 Demolition & Disposal Of Unservisable Material With All Lead And Lift For Unreinforeced Concrete. Cmt 50.00 ₹ 623.02 ₹

Demolition Of Brick Work & Stone Masonry Including Stacking Of Serviceable Materials And Disposal

Of Unserviceable Materials With All Lead And Lift (1) In Cement Mortar.

4 Dismentling steel work including distempering and stacking the materials with all lead and lift. Kg 50.00 ₹ 3.85 ₹

Demolition Including Stacking Of Serviceable Materials And Disposal Of Unserviceable Materials With

All Lead And Lift. (I) R.C.C Work.

Earthwork in cuting in all sorts of soil and soft murrum including conveying and spreading the stuff,

6 embankment as and where directed up to any lead from the end of the cutting with all required lead Cmt 228.00 ₹ 134.13 ₹

Conveyance Charge Of Earth, Lime, Murrum, Building Rubbish, Manure, Garbage, Sludge, Excavated

Rock, Fly Ash, Aggregates Of Any Kind Executed Outside The Road Site. Rate Also Includes Spreading

& Levelling Etc Complete. Internal Conveyance Above 50 Mt Done Within The Work Site Is Not

Payable. e) Lead From 4 Km to 5 Km.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M250 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with

grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand

in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing and laying precast concrete grass paver blocks of approved make, size (typically 400mm x

400mm x 80mm or as specified), and thickness, manufactured using M30 grade concrete with

approved pigment, compacted by vibro-pressing for uniform strength and durability. Blocks to be laid

10 over a compacted sub-base and 50mm thick sand bed, including leveling, joint filling with soil/sand Smt 420.50 ₹ 656.50 ₹

mix, and turf/grass plantation in voids, complete in all respects as per drawings, specifications, and

instructions of Engineer-in-Charge.

Providing and laying cement concrete flooring 1:2:4 (1- cement : 2-coarse sand : 4-graded stone

11 aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (B) Smt 30.00 ₹ 349.10 ₹

Excavation For Foundation Upto 1.5 M Depth Including Sorting Out And Stacking Of Useful Materials

And Disposing Off The Excavated Stuff Upto 50 Meter Lead.(A) Loose Or Soft Soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Filling Available Excavated Earth (Excluding Rock) In Trenches. Plinth, Sides Of Foundations Etc. In

14 Layers Not Exceeding 20 Cm. In Depth Consolidating Each Disposited Layer By Ramming And Cmt 301.50 ₹ 136.92 ₹

Providing and laying cement concrete 1:4:8 (1- Cement : 4-Coarse sand : 8- Graded Brick bats

15 aggregate 40mm normal size) and curing complete excluding cost of formwork in (A) Cmt 179.00 ₹ 2,692.00 ₹

Foundation and Plinth

Supplying and filling in foundation and plinth with RUBBLE including filling voids with sand and

watering etc.complete.

Providing and laying controlled cement concrete M.250 and curing complete Including the cost of

17 formwork and excluding reinforcement for reinforced concrete work in (A) Foundations, footings, Cmt 3.50 ₹ 46,187.82 ₹

Base of columns and Mass concrete.

Providing Tmt Bar Fe 500D Reinforcement For R.C.C. Work Including Bending, Binding And Placing In

Position Complete Upto Floor Two Level

Brick Work Using Common Burnt Clay Building Bricks Having Crushing Strength Not Less Than

Kg./Sq.Cm. In Foundation And Plinth In Cement Mortar 1:5. (1- Cement : 5 -Fine Sand)

Brick Work Using Common Burnt Clay Building Bricks Having Crushing Strength Not Less Than

Kg./Sq.Cm. In Foundation And Plinth In Cement Mortar 1:5. (1- Cement : 5 -Fine Sand)(B)

Conventional Extra For Brick Work In Superstructure Above Plinth Level Up To Floor Two Level (B)

Supplying And Stacking Of Good Earth At Site Including Royalty And Carriage Upto 5 Km Lead

Complete (Earth Measured In Stacks Will Be Reduced By 20% For Payment).

Grassing With Selection No. 1 Doob Grass Including Watering And Maintenance Of The Lawn For

22 Days Or More Till The Grass Forms A Thick Lawn, Free From Weeds And Fit For Mowing Including Smt 55.00 ₹ 17.88 ₹

Supplying Good Earth, If Needed (The Grass And Good Earth Shall Be Paid For Separately).

Providing And Supplying Precast Concrete Light Poles Of Exposed Finish, 30Mm Thick, Approx. 250 Kg

Each, Fabricated Using High-Grade Opc Cement (Ultratech / Birla White / Jk White), Crushed

Coloured Stone Aggregates, 90% Silica Sand, Ar Grade Fibers (Roving Ar2500H103 & Chopped Strand

Acs13Ph901X), Fe 415 Steel, Non-Corrosive Admixtures And Pure Iron Oxide Pigments. Poles To Be

Cast In Custom Molds Ensuring Uniform Thickness And Finish, Cured Properly, And Delivered Without

Ms Plate And Light Fitting.

24 Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates complete. KG 20.00 ₹ 55.60 ₹

Supplying only of Stainless Steel Bollards of 1-meter height, made from SS 202 grade stainless steel,

surface polished finish. Bollard comes in silver color with no applicable warranty. Suitable for outdoor

or pathway demarcation and basic vehicle restriction/security applications.

Cat Eye / Road Stud / RPM: Supplying Raised Pavement Markers made of polycarbonate and ABS

moulded body and reflective panels with Micro prismatic lens (No Glass bead lens) capable of

providing total internal reflection of the light entering the lens face and shall support a load of

kgs. tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of

MORTH Circular No RW/NH/33023/10-97 Ð DO III Dt 11.06. 1997. The height, width and length shall

not exceed 20 mm, 130 mm and 130 mm and with minimum reflective area of 13 Sqcm on each side

and the slope to the base shall be 35 +/- 5 degree. The body of the marker should having finger grip

for easy and accurate placement and application with epoxy / bituminous Adhesive as recommended

by the manufacturer of the marker. The color of the marker should be as per the IRC 35-2015 and as

directed by Engineer-in-charge.

Facility Informatory Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 80 x 60 cms rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of

Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x

27 35 x 3mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol Each 1.00 ₹ 5,906.48 ₹

foreach board shall be as per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4

CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test

lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective

STOP Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 90 cms Octagone as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best

quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as

per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm;

28 painted with bestquality epoxy coatings in black and white bends. The details of symbol foreach Each 1.00 ₹ 7,213.42 ₹

board shall be as per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test

lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective

Parking Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size size 60 x 60cms. square plus 60 x 20cms rectangular additional

plate as as per the design of IRC-67-2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required

fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in

black and white bends. The details of symbol foreach board shall be as per theinstruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 10 years

for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective sheeting

Direction (Junction) Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 244x122 cms. rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ;reflectorised with Micro Prismatic Graderetro refiectivesheeting of

Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.) stand post of

x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of

30 50 x 50 x 5mm; painted with bestquality epoxy coatings in black and white bends. The details of Each 1.00 ₹ 26,572.09 ₹

symbol foreach board shall be as per theinstruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under

the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test

lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective

Place Identification Sign 'Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum Composite Panel), size 150x90 cms rectangular as per IRC-67-2012 design, pre-

treated with phosphating process & acid etching, coated with one coat epoxy primer and two coats

of best quality epoxy paint, reflectorised with Micro Prismatic Grade retro reflective sheeting Type-11

as per ASTM D-4956 and latest M.O.S.T. specs, with 4.0m long (2 Nos.) stand posts of 75x75x6mm /

65NB circular MS pipe and frame of 35x35x3mm iron angle painted with black & white epoxy coating,

symbols as per engineer's instruction, fixed at site in 1:2:4 CC blocks of 45x45x60 cms including

excavation, curing etc., complete under engineer’s supervision, with 10-year warranty for reflective

sheeting and certified 3-year outdoor exposure test report from third party lab for product offered,

(A) Class-C Type-11 Retro Reflective sheeting.

Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin

surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is excluding of surface applied

glass beds as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and

32 holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white color marking should Smt 32.25 ₹ 367.72 ₹

provide liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux and Asphalt road shall

be min 100 mcd/m2/lux during the service life during the day time. The marking should meet the

performance criteria for night time reflectivity, wet reflectivity and skid resistance as mentioned in

the section-15 of IRC 35-2015. Warranty for the Retro reflectivity should be two years.

Providing and stacking of Ficus bengalensis (Bargad) of height 120-135 cm. in big poly bags of size

cm as per direction of the officer-in-charge.

Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size

cm as per direction of the officer-in-charge.v

Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size

cm as per direction of the officer-in-charge.

Providing and stacking of Mangifera indica (Mango-grafted ) of height 60-75 cm. in big poly bag of

size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Milletia ovalifolia of height 120-135 cm. in big poly bag of size 25 cm as per

direction of the officer-in-charge.

Providing and stacking of Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag of size

cm as per direction of the officer-in-charge.

Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet

Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla,

Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots &

as per direction of the officer-in-charge.

40 Wadelia trilobata,full of leaves in 15 cm size of Earthen Pot / Plastic Pot. Each 135.00 ₹ 15.15 ₹

Providing and stacking of Ipomea (Golden leaves),with fresh and healthy leaves in 15 cm size of

Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Cestrum nocturnum (Raat ki Rani) of height 60- 75 cm. with 4-5 branches in

bag of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Hamelia patens (Dwarf ) of height 30-45 cm. with 3-4 branches in earthen

43 pots of size 20 cm as per direction of the Each 135.00 ₹ 40.40 ₹

officer-in-charge.

Providing and Stacking of Lemon grass of ht. 30cm with multi branches in Poly bag of size 20 cm. as

per direction of the officer-in-charge.

Providing and stacking of Chlorophytum (Green), full of leafy suckers in 15 cm size of Earthen

Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Dombeya mastersii of height 60-75 cm. with 4-5 branches in bag of size

cm as per direction of the officer-in-charge.

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s

as per direction of officer in charge (excluding cast of plant & water)

2.57.1 Trees Plant Each 121.00 ₹ 7.37 ₹

2.57.2 Shrubs Plan Each 1,620.00 ₹ 3.69 ₹

2.57.3 Hedge Plant /Ground cover Each 135.00 ₹ 2.47 ₹

I / We am / are willing to carry out the work at __________% above / below __________ percentage (should be written in figures and words) of the

Estimated Amount put to

Deduct _________ % Below.

Notes 1 - All work shall be carried out as per Public Works Department Handbook and other

specifications of Division or as directed.

Notes 2 - All the columns in Schedule should be filled in ink and the total of the entries in the last

column should be struck by the contractor under his signature.

Notes 4 - To be continued on additional sheets, if found necessary .