AME to water supply distribution network of munirabad camp and colony for the year 2025-26 (CAT-I)

Name of work :- Repairs to dislodged trough portion from km 0.00 to 1.00 in selected reaches of Distributory 1A under RBHLC

It. No Item of work UNIT QUANTITY RATE AMOUNT

1 Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months 40 HP monobloc motor rewinding Job 1.00 22000.00 22000.00

2 Providing and fixing of Extension spindle rods,PN 10 /16 suitable for Gate valve of following dia for open and closing application, Extension Spindle lengths shall be available on required sizes as per site conditions, spindle shall be of fixed type, suitable size of MS Square bar epoxy coated, bottom adaptor & Spindle cap (epoxy coated /galvanised) ductile iron grade of EN1563 EN-EJS-400-15 / IS1865 Spheroidal Graphite Iron Gr40. Protection tube of PVC, Top and Bottom cover / Bottom Connector shall be made by PVC, Bolt shall be made by Zinc coated steel 8.8 Split pin shall be made by Electro galvanized, this set up should help to have a buried application of Gate Valves etc., as per the directions of the Engineer-in-Charge.(50-150mm dia) No 3.00 4762.00 14286.00

3 Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete. m 36.00 359.00 12924.00

4 Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any.For 25 mm dia GI BEND Each 2.00 145.00 290.00

5 Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any.For 25 mm dia GI Union Each 1.00 160.00 160.00

6 Supply and delivery at site wrought middle steel (galvanized) GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any For 25 mm dia GI hexagonal nipple Each 1.00 129.00 129.00

7 cement (OPC/PPC/PSC) bag 5.00 280.00 1400.00

8 Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump above 12.50HP confirming with ISI mark and its latest amendments. Each 3.00 2200.00 6600.00

9 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.140mm(weight of pipe -3.097 kg) Mtrs 10.00 518.00 5180.00

10 Supply and delivery at site special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments.For 90mm dia PVC couplers Nos 2.00 125.00 250.00

11 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.For 90 mm dia PVC Elbows Nos 2.00 276.00 552.00

12 Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.For 90 mm dia PVC Tee Nos 2.00 171.00 342.00

13 Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.For 90 mm dia PVC BEND Nos 2.00 390.00 780.00

14 Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.For 90 mm dia PVC SERVICE SADDLES Nos 2.00 211.00 422.00

15 Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.For 90 mm dia PVC REDUCER Nos 2.00 148.00 296.00

16 Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months, 30 HP monobloc motor rewinding Job work 1.00 20000.00 20000.00

17 Rewinding of submergible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submergible pumpsets etc.(with guarantee period not less than 6 months) For all types of submergible pumpsets above 9.5 HP and upto 10 HP Job work 1.00 4744.00 4744.00

18 Providing and applying grease of approved quality to gate and hoist components requiring greasing as part of the annual maintenance using grease gun wherever necessary including cost of all materials,machinery, labour, scaffolding etc., complete with all leads and lifts. Kgs 10.00 432.00 4320.00

19 Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months, 10 HP monobloc motor rewinding Jobwork 1.00 6500.00 6500.00

20 Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months, 15 HP monobloc motor rewinding Jobwork 1.00 12000.00 12000.00

21 Providing Ball bearing as per ISI specifiction with guarantee period of not less than 12 months

22 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. m2 28.50 451.00 12853.50

23 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) m2 140.80 158.00 22246.40

24 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete PVC pipes 75mm dia., 6 kg/sqcm & class 3

a) PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 30.00 411.00 12330.00

b) PVC pipes 75mm dia., 6 kg/sqcm & class 3 m 30.00 220.00 6600.00

c) PVC pipes 50mm dia., 6 kg/sqcm & class 5 m 30.00 101.00 3030.00

d) PVC pipes 32mm dia., 10 kg/sqcm & class 5 m 30.00 67.00 2010.00

e) PVC pipes 25mm dia, 10 kg/sqcm & class 5 m 30.00 48.00 1440.00

25 Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete

a) 110mm dia PVC couplers each 10.00 171.00 1710.00

b) 75mm dia PVC couplers each 10.00 67.00 670.00

c) 50mm dia PVC couplers each 10.00 28.00 280.00

d) 32mm dia PVC couplers each 10.00 16.00 160.00

e) 25mm dia PVC couplers each 10.00 12.00 120.00

26 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

a) 110mm dia PVC Elbows each 10.00 302.00 3020.00

b) 75mm dia PVC Elbows each 10.00 192.00 1920.00

c) 50mm dia PVC Elbows each 10.00 66.00 660.00

d) 32mm dia PVC Elbows each 10.00 21.00 210.00

e) 25mm dia PVC Elbows each 10.00 16.00 160.00

27 Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments

a) 110mm dia PVC BEND each 10.00 492.00 4920.00

b) 75mm dia PVC BEND each 10.00 245.00 2450.00

c) 50mm dia PVC BEND each 10.00 89.00 890.00

d) 32mm dia PVC BEND each 10.00 36.00 360.00

e) 25mm dia PVC BEND each 10.00 24.00 240.00

28 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN6.0,140mm dia m 20.00 752.00 15040.00

29 Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 with the latest amendments only. The stem sealing should be with toroidal sealing rings (minimum 2 " O " rings). Body and bonnet should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. For PN-10: (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) etc. complete For sluice Valve of PN -10.0 and 80mm each 3.00 10393.00 31179.00

TOTAL 254,003.90 GST @ 18% Round off Total

Executive Engineer 761280.46

KNNL, No-1 T. R. Division 137,031.00

Munirabad 898311.46

Name of work :- AME to water supply distribution network of munirabad camp and colony for the year 2025-26

It. No Item of work UNIT QUANTITY RATE AMOUNT

1 Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months 40 HP monobloc motor rewinding Job 1.00 22000.00 22000.00

2 Providing and fixing of Extension spindle rods,PN 10/16 suitable for Gate valve of following dia for open and closing application, Extension Spindle lengths shall be available on required sizes as per site conditions, spindle shall be of fixed type, suitable size of MS Square bar epoxy coated, bottom adaptor & Spindle cap (epoxy coated /galvanised) ductile iron grade of EN1563 EN-EJS-400-15/ IS1865 Spheroidal Graphite Iron Gr40. Protection tube of PVC, Top and Bottom cover / Bottom Connector shall be made by PVC, Bolt shall be made by Zinc coated steel 8.8 Split pin shall be made by Electro galvanized, this set up should help to have a buried application of Gate Valves etc., as per the directions of the Engineer-in-Charge. (50-150mm dia) No 3.00 4762.00 14286.00

3 Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete. m 36.00 359.00 12924.00

4 Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any.For 25 mm dia GI BEND Each 2.00 145.00 290.00

5 Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any.For 25 mm dia GI Union Each 1.00 160.00 160.00

6 Supply and delivery at site wrought middle steel (galvanized) GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any For 25 mm dia GI hexagonal nipple Each 1.00 129.00 129.00

7 cement (OPC/PPC/PSC) bag 5.00 280.00 1400.00

8 Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump above 12.50HP confirming with ISI mark and its latest amendments. Each 3.00 2200.00 6600.00

9 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.140mm(weight of pipe-3.097 kg) Mtrs 10.00 518.00 5180.00

10 Supply and delivery at site special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments.For 90mm dia PVC couplers Nos 2.00 125.00 250.00

11 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.For 90 mm dia PVC Elbows Nos 2.00 276.00 552.00

12 Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.For 90 mm dia PVC Tee Nos 2.00 171.00 342.00

13 Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.For 90 mm dia PVC BEND Nos 2.00 390.00 780.00

14 Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.For 90 mm dia PVC SERVICE SADDLES Nos 2.00 211.00 422.00

15 Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments.For 90 mm dia PVC REDUCER Nos 2.00 148.00 296.00

16 Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months, 30 HP monobloc motor rewinding Job work 1.00 20000.00 20000.00

17 Rewinding of submergible pumpset with copper winding wires of appropriate guage, as per specifications and or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submergible pumpsets etc.(with guarantee period not less than 6 months) For all types of submergible pumpsets above 9.5 HP and upto 10 HP Job work 1.00 4744.00 4744.00

18 Providing and applying grease of approved quality to gate and hoist components requiring greasing as part of the annual maintenance using grease gun wherever necessary including cost of all materials,machinery, labour, scaffolding etc., complete with all leads and lifts. Kgs 10.00 432.00 4320.00

19 Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months, 10 HP monobloc motor rewinding Jobwork 1.00 6500.00 6500.00

20 Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months, 15 HP monobloc motor rewinding Jobwork 1.00 12000.00 12000.00

21A Providing Ball bearing as per ISI specifiction with guarantee period of not less than 12 months for 10 HP each 1.00 2050.00 2050.00

21B Providing Ball bearing as per ISI specifiction with guarantee period of not less than 12 months for 15 HP each 1.00 2550.00 2550.00

21C Providing Ball bearing as per ISI specifiction with guarantee period of not less than 12 months for 20 HP each 1.00 3080.00 3080.00

21D Providing Ball bearing as per ISI specifiction with guarantee period of not less than 12 months for 30 HP each 1.00 4050.00 4050.00

21E Providing Ball bearing as per ISI specifiction with guarantee period of not less than 12 months for 40 HP each 1.00 4600.00 4600.00

22 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1 2 4 (1 cement 2 coarse sand 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. m2 28.50 451.00 12853.50

23 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 sqm over and including one coat of Special primer applied @ 0.75 L/10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50percent @ 60 degree angle with 10 years life) m2 140.80 158.00 22246.40

24a) Providing PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete PVC pipes 75mm dia., 6 kg/sqcm & class 3 PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 30.00 411.00 12330.00

24b) Providing PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete PVC pipes 75mm dia., 6 kg/sqcm & class 3 PVC pipes 75mm dia., 6 kg/sqcm & class 3 m 30.00 220.00 6600.00

24c) Providing PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete PVC pipes 75mm dia., 6 kg/sqcm & class 3 PVC pipes 50mm dia., 6 kg/sqcm & class 5 m 30.00 101.00 3030.00

24d) Providing PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete PVC pipes 75mm dia., 6 kg/sqcm & class 3 PVC pipes 32mm dia., 10 kg/sqcm & class 5 m 30.00 67.00 2010.00

24e) Providing PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete PVC pipes 75mm dia., 6 kg/sqcm & class 3 PVC pipes 25mm dia, 10 kg/sqcm & class 5 m 30.00 48.00 1440.00

25a) Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc.complete 110mm dia PVC couplers each 10.00 171.00 1710.00

25b) Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc.complete 75mm dia PVC couplers each 10.00 67.00 670.00

25c) Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc.complete 50mm dia PVC couplers each 10.00 28.00 280.00

25d) Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc.complete 32mm dia PVC couplers each 10.00 16.00 160.00

25e) Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc.complete 25mm dia PVC couplers each 10.00 12.00 120.00

26a) Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110mm dia PVC Elbows each 10.00 302.00 3020.00

26b) Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75mm dia PVC Elbows each 10.00 192.00 1920.00

26c) Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50mm dia PVC Elbows each 10.00 66.00 660.00

26d) Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32mm dia PVC Elbows each 10.00 21.00 210.00

26e) Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 25mm dia PVC Elbows each 10.00 16.00 160.00

27a) Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110mm dia PVC BEND each 10.00 492.00 4920.00

27b) Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75mm dia PVC BEND each 10.00 245.00 2450.00

27c) Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50mm dia PVC BEND each 10.00 89.00 890.00

27d) Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32mm dia PVC BEND each 10.00 36.00 360.00

27e) Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 25mm dia PVC BEND each 10.00 24.00 240.00

28 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE Upto 110mm dia Coil shall be used. For HDPE PE 80 PN 6.0 HDPE Grade PE80-PN6.0,140mm dia m 20.00 752.00 15040.00

29 Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 with the latest amendments only. The stem sealing should be with toroidal sealing rings (minimum 2" O" rings). Body and bonnet should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. For PN-10 (Note TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) etc. complete For sluice Valve of PN -10.0 and 80mm each 3.00 10393.00 31179.00

TOTAL 254,003.90 GST @ 18% Round off Total

Executive Engineer 761280.46

KNNL, No-1 T. R. Division 137,031.00

Munirabad 898311.46