Supply,Delivery, installation commissioning of Submerssible pumping machinery with allied work No-I Zone-I of Madna Ground water based Water supply scheme under MEDB, PHE Dte in Murshidababad.

Amount

Supply and delivery at site off Fully automatic Direct on line submerssible pump controller with single phase preventer for 415V, 50Hz, 3Ph Motor for 7.5 HP relay Range (6-10)A Make of Starter-L&T , type-MUG10DOL type of any other approve make.

Supply and delivery and fixing with encloser, nut and bolt 100A 4 Pole off load change over Switch (Make-Havells/Standard/any other approved make)

Supply and delivery at site of 80mm dia UPVC standard type column pipe (Cream Colour) with both side threaded and one end side socketed with registered KPMG Deliver pr 17kg/sqcm i)3 Mtrs Long (Standard)

ii)1.5 Mtrs Long (Standard)

Supply and delivery at site of 80mm dia CI top & Bottom adopter

Supply delivery at site of 4sqmm 3 core water proof flat Submersible copper cable suitable for above pump set as per IS694

Supply Delivery at site of 1.1 Kv Grade 25Sqmm 3-1/2 Core XLPE insulated Al Ar Armoured Cable fonforming to IS 7098 ( Part-I) 1998 , with upto date amendments.

Supply and delivery at site of Heavy type 250mm dia split type tube well cover with 12mm thick clamping arrangement including holes of Column pipe , air pipe and cable entry

Supply and delivery at site 50mm dia Non Metalic pipes (IS:14930)and specials for protection of submersible cable

Supply and delivery at site of Anti snapping safety device for pump set by supplying suitable size MS clamps tow sets and nylon rope of required length including supplying of nuts, bolts and all other materials

Carrying 7.5 HP repaired pump mototr set along with from departmental stack yard to worksite.

Lowering of P/Motor with column pipe at siaid T/Well by proper derrick arrangement and jointing the delivery piep line and power connection all complete.

Making suitable size pump foundation base with supplying cement ,, sand , stonechips etc in the porting of (4:2:1) including plastering , neat cement finish etc. complete as per direction of EIC (Size-1.00 MtrX 1.38Mtr)The above base of tubewell is to be made with 250mm thickness brick wall on all side with 200mm thick F.C slab on top including plastering and neat cement finishing.

Making Brick pillar 0.25X0.25mtr for supporting of valves and pipes with 12mm thick plaster and net cement finish complete.

Add GST @18%

GOSWAMI TRANSPORT AND ENGINEERING WORKS (BID ID -6147962)

SAMARPITA ENGINEERING (BID ID -6143780)

Bidder Name

JOGMAYA ENGINEERING

GOSWAMI TRANSPORT AND ENGINEERING WORKS

SAMARPITA ENGINEERING