Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹7.4 L
EMD Value
₹7,422
Closing Date
3 Dec 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Superintending Engineer, MechanicalDivision,Kataka
OFFICE OF THE SUPERINTENDING ENGINEER, MECHANICAL DIVISION, JAGATPUR, KATAKA
Repair Brudhalinga sluice gate of Dharmasala Block, under Drainage Division, Jajpur for the year 2026 27.
2026_CEMWR_146702_1
SE/MDC-11(3)/2026-27
Open Tender
Mechanical Works
Percentage
25 days
Dharmasala Block
Please refer Tender documents.
2 documents required · 2 mandatory
₹4,000
₹7,422
Yes
19 Nov 2026
19 Nov 2026
4 Dec 2026
19 Nov 2026
3 Dec 2026
19 Nov 2026
19 Nov 2026 - 3 Dec 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply of structural steel materials of different section and sizes (IS:2062), stainless steel flats of different section and sizes (04 Cr 19 Ni of IS :1570), , Sluice gate consisting of bronze pad ,pad base top seal clamp plate,side seal clamp plate,wheel bush,colar,pin,cover plate, seal flats etc., hoisting arrangements consisting of hoist bridge, chequered plate of total weight about 6 MT approx for 3 Nos. of Fixed wheel sluice gate (Size-2700mm x 2600mm) & Restraining arrangements,etc. as per specification with all accessories as per instruction of Engineer-in-charge. | 3 | Set | 44,824.46 | ₹1,34,473.38 |
| 2 | Erection, positioning, alligning, fixing, trial, commissioning, testing etc. Sluice gate consisting of skin plate, horizontal girder,end vertical girder,bronze pad ,pad base top seal clamp plate,side seal clamp plate,wheel bush,colar,pin,cover plate, seal flats etc., screw hoisting arrangements consisting of hoist bridge, gear box,supporting beams, cross beam base plate, fixing of anchor bolts, laying of chequered plate as per specification with all accessories including machinery, fixtures, labour, cutting, welding, drilling, boring, cleaning, finishing, consumables with lead & lifts, all complete as per instruction of Engineer-in-charge. | 3 | Set | 95,789.59 | ₹2,87,368.77 |
| 3 | Painting of 2nd stage embedded parts (exposed portion), gate, and its components in both upstream side and downstream side, hoisting components,Restraining arrangements including cleaning, degreasing, handling, cost of paint, applying of one coat Zinc primer of 40micron thick and three coats of coal tar epoxy paint of 100 micron each for 3 Nos. of Sluice gates all inclusive of labour, materials and consumables as per relevant IS Code specifications with all lead & lifts as per instruction of Engineer-In-Charge. | 3 | Set | 17,468.94 | ₹52,406.83 |
| 4 | Supply of following bought out materials for 3 Nos. of Sluice gate - Bolts, screw, nuts, washers etc- 51 Kg, Bottom Rubber Seal(10mm thick)- 6.984 Mtr., Φ36 Side Seal(P-Type)- 15.6 Mtr., Gate Pin Φ40x150 long- 3 Nos., Restraining arrangement bush ID 100 mm thickness 10 mm and length 200 mm aluminium bronze - 3 Nos.,Restraining arrangement MS bush ID 120 mm thickness 200 mm -3 nos,Single Thrust Ball bearing SKF51224 or Equivalent-6 nos,TOP SEAL Ø32mm x 12mm th- 112mm width double bulb Rubber seal-7.5 mtr,SIDE SEAL Ø32mm x 12mm th- 112mm width double bulb Rubber seal-15.6 mtr, Operating handle with GI pipe 3 Nos. , Ø 100 screw rod straightening and polishing. - 7 Mtr.,Wheel pin of dia 50mm & length 120mm - 45C8 of IS : 1570-12 nos, Wheel Bush of OD 70mm with Thickness 20mm-12 nos,Collar for wheel pin of OD 140mm with Thickness 30mm-24 nos, Grease & gear oil etc - 12 Kg.etc. | 3 | Set | 83,512.45 | ₹2,50,537.35 |
| 5 | Extra Item includes vent cleaning, Watch and ward etc all complete as per instruction of Engineer-in-charge. | 1 | Set | 11,266.64 | ₹11,266.64 |
| 6 | Transportation charges of above said half finished materials from workshop, generator ,welding transformer, derrick & other T & P with labour charges for loading and unloading in a 10T truk about Transportation worksite to & fro . | 1 | Trip | 6,073.08 | ₹6,073.08 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
DTCN.pdf
Tender Documents • 1.16 MB
BOQ_622118.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .