CONSTRUCTION OF VCB ROOM AND DIESEL STORE ROOM IN THE TSG GROUP OF CBRI

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Surfacing Dressing of the Ground i/c vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50m and lift up to 1.5 all kinds of soils.

Providing Unskilled manpower for shifting of various old testing models and materials from construction site to specified space in the institute as per direction of Engineer-in-charge

Providing skilled manpower for shifting of various items, furneture,old testing models and materials from construction site to specified space in the institute as per direction of Engineer-in-charge

Providing Tractor trolly for shifting of malba, debrise, soil, various old testing models and materials from construction site to outside of institute and out site area of nagar nigum Roorkee including loading unloading complete work in all respect as per direction of Engineer-in-charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineerin-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Earth Work in excavation by mechanical / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm. on plan) including dressing sides and ramming of bottoms, lift up to 1.5 including getting out the excavated soil as directed.All kinds of soils

Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layer not exceeding 20Cm. in depth , consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1, 5m.

Supplying and filling in plinth with sand under floor including watering consolidating and dressing Complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smoothes.

Reinforced cement concrete all work up to plinth level mix 1:1.5:3 in (1 cement :1.50 coarse sand :3 graded stone aggregate 20mm nominal size) (excluding cost of centering, shuttering, finishing and reinforcement.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses,fillets, columns, pillars, piers , abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering ,finishing and reinforcement1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone cu.m aggregate 20 mm nominal size)

Reinforced cement concrete work in beams suspended floors roofs having slope up to 15 landings balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases up to floor five level excluding cost of centering, shuttering, finishing and Reinforcement.(1 cement :1.50 coarse sand :3 graded stone aggregate 20mm nominal size)

Centering shuttering i/c strutting, propping etc. and removal of from for.

Foundations and footings

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, pillars, piers, Abutments, posts and Struts.

Reinforcement for RCC work i/c straightening, cutting bending, placing in position and binding all complete. Cold twisted bars

Brick work in foundation of class designation 75 in Cement mortar 1:6 (1cement :6 coarse sand)

Brick work in superstructure of class designation 75 in Cement mortar 1:6 (1 Cement : 6 coarse sand).

Half brick masonry with bricks of class designation 75 in super structure, above plinth up to floor two level in cement mortar1:4 (1 cement : 4 coarse sand).

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

Providing and fixing glass strips in joints of terrazo/ cement concrete floors.40 mm wide and 4 mm thick

Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using flats 30x6mm for diagonal braces and central cross piece

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Painting with synthetic enamel paint on wood and Steel work of approved Brand and manufacture .to give an even shad two or more coats on new work

6 mm thick cement plaster on ceiling with cement mortar 1:3 (1 cement: 3 fine sand).

12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)

15 mm thick cement plaster rough side brick work 1:6 cement mortar(1cement :6 coarse sand) including scaffolding

Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.With cement mortar 1:4 (1 cement : 4 fine sand)

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Wiring for light Point/ fan point/ exhaust fan point with 1.5 sq..mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit with modular switch of Havell’s/ Modular Legrand Mosaic Anchor ROMA make ISI marked, modular plate suitable G.I Box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable of Polycab/ Havell’s/ KEI/ RR and Phenolex make including ceiling rose / holder as required.

Wiring for circuit /sub-main wiring along with earth wire with the following size of FRLS PVC Insulated copper conductor, single core cable of Polycab/ Havell’s/ KEI/ RR/ and Phenolex make 1100 V grade ISI marked in surface/ recessed steel conduit as required

2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire

2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire

2 x 4 sq.mm + 1 x 4 sq.mm earth wire

3 Core, 6 Sq.mm All aluminium Conductor

Supplying and fixing 1 / 2 modules (75mmX75mm) G I box along with modular base and cover plate for modular switches in recess etc. as required.

Supplying and fixing 4 modules (125mmX75mm) G I box along with modular base and cover plate for modular switches in recess etc. as required.

Supplying and fixing 8 modules (125mmX125mm) G I box along with modular base and cover plate for modular switches in recess etc. as required.

Supplying and fixing suitable size G.I Box with modular plate and cover in front on surface or in recess, including P/F 3 pin 5 / 6 A modular socket outlet and 5/6 A modular switch, connections etc as required.

Supplying and fixing suitable size G.I Box with modular plate and cover in front on surface or in recess, including P/F 6 pin 5 / 6 & 15 / 16 A modular socket outlet and 15/16 A modular switch, connections etc as required.

Supplying and fixing of 3 pin 5 A ceiling rose on the existing junction box / wooden block including connections etc as required.

Supplying and fixing decorative ultra slim aluminium LED lighting fixture with 22 watt, high lumen output, environment friendly, energy efficient ready to use Havells or its equivalent make of Bajaj/Philips make complete in all respect as required and directed by engineer-in-charge.

Supplying and fixing of 1200 mm sweep ceiling fan of Crompton make (model Bruna) or its equivelnt, Havells with complete in all respect as required.

Supplying and fixing of two module stepped type electronic ceiling fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supply and Fixing LED street light fixture of new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing and high power with high LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact reistance of IK07 with 10 KV built – in Surge protection device of Havells make 90 watt, 230 V odering code ENDURAPEARLPLUSS L90 W LED 757PASYTOPCASTHO or its equivlant make of Bajaj/ Philips complete as required .

Supplying and fixing of 32 mm dia X 2.00 metres long G I pipe (medium class) bracket for mounting of havells make 90 watt 230 LED street light fitting on polel including bending the pipe to the required shape, 2 nos. 40mm X 3mm flat iron clamp with nuts, bolts and washers; wiring with 2.5 sq. mm wp/pvc wire and painting the flat iron with primer and finish paint etc. as required.

Supplying and fixing 40 A rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supply and fixing 6 Way single pole and neutral, sheet steel, MCB distribution board 240 V, on surface / recess, complete with tinned copper bus bar, common neutral link, earth bar, din bar, interconnections, powder painted including earthing etc. or its equivalent of Legrand/ ABB/ L&T and Sciemense Make (But without MCB /RCCB / Isolator) as required.

Supplying and fixing single pole 5- 32A rating 240/415 V, 10 KA, C series MCB suitable for inductive loads in the existing MCB DB complete with connection, testing and commissioning etc. as required.

M/S AYUB CONTRACTOR

M/s Atul Kumar

RAKESH KUMAR

M/S KURBAN CONTRACTOR