Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST REASONABLE BID | |
| 2 | L2₹38.7 L+₹61,707 (1.62%)Rejected-Finance 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | RAJASTHAN | 334001 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹40.7 L+₹2.6 L (6.84%)Rejected-Finance MARYADA 111 SHIKARGARH KANHAIYA NAGAR JODHPUR 342001 | JODHPUR | RAJASTHAN | 342001 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹47.9 L+₹9.9 L (25.9%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹48.3 L+₹10.2 L (26.9%)Rejected-Finance PLOT NO 361 FLAT NO 06 FIRST FLOOR SECTOR 11 HIRAN MAGRI UDAIPUR 313001 RAJ | UDAIPUR | UDAIPUR | RAJASTHAN | 313001 | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
5 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE ARMY JODHPUR
CWE ARMY MULTAN LINES ARMY AREA JODHPUR
REPAIR TO RCC ROOF CHAJJAS BALCONY BY GUNNITING AND MISC B R WORKS UNDER THE AREA OF AGE B R I AT ARMY AREA JODHPUR UNDER GE A CENTRAL
2022_MES_529018_1
82223/14/E8
Open Tender
Civil Works
Item Rate
180 days
JODHPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE ARMY CENTRAL
₹96,000
16 Aug 2022
7 Jun 2022
12 Jul 2022
7 Jun 2022
5 Jul 2022
21 Jun 2022
60 days
Amount
Demolition of reinforced cement concrete as in roof , floor (other than ground floor), beams, stair case, landing, chajja and other similar suspended work and including reinforcement cut on required to facilitate demolition and removing rubbish material outside the MD land complete all as specified and as directed by Engineer in charge
M&L for RCC 1:2:4 type B-1 using 20 mm graded aggt as in slab supported on walls, beams, columns in floors, roofs, landings, balconies, canopies, chajjas, deck slabs and in shelves and the like complete
M&L for MS, TMT bars 10 dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.Note:- Weight of binding wire shall not be considered for measurement and payment purposes
M&L TMT steel bars 8mm dia , cut to llength, bend to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than .9 mm dia or securing with clips .
Form work to soffits of suspended slabs such as roof slabs, chajjas, floor slabs, landings and similar work not exceeding 200mm thick horizontal or sloping for achieving fair finished surfaces of flat concrete complete all as specified and directed by Engineer in charge.
Formwork to edges of rough finished surface of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and simillar work exc. 10cm but n. exc 20 cm wide complete
Exposing existing RCC members such as columns, slabs, lintels, beams, etc. up to the main reinforcement carefully by means of Chisel & hammer, hard wire brushes or any other mechanical means, so as to remove all loose concrete and cleaning the surface to remove all dust particles, etc. and make the surface ready for chemical treatment in bone dry condition.
M&L for 30 mm thick guniting in patches on to the required area on RCC/PCC columns, beams, stairs, lintels, retaining walls, sunshades, roofing slab etc. of all sizes and shapes at all heights from existing ground floor and all locations with cement and mortar 1:2 (1 cement : 2 sand) under 2 to 2.8 Kg/Cm2 pressure after removing the damaged loose spalt concrete portions by chipping, removal of dust and applying one coat of rust convertor/kp-100 equivalent grade over reinforcement wherever necessary providing and tying in position 25mmx25mmx12 gauge dia wire MS welded mesh or smaller size over treated surface ready to receive grouts, curing for 10 days etc,loose spalt concrete portions by chipping, removal of dust over treated surface ready to receive grouts including 5mm to 10mm thick plastering in CM 1:4 to match existing surfaces and finished even and smooth including curing for 10 days etc, complete operation all as directed including labour charges hire for all tools and plant machineries cost of consumables, scaffolding all types of protective equipments, plant floors, pipelines, vessels, materials etc. so as to do guniting in plant, removing the debris out of MOD land in low lying areas and leveling as directed, incl two coat of white wash over one coat of primer complete all as directed by Engr-in-charge.
Note (i) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with brushes, washed with water and alloy to dry. To this surface apply chemistic polycrete admixture at the rate not less than 2% by weight of cement or as per manufacture’s instructions. (ii) When polymix coating is in tackey condition guniting is done with polycrete admixture at the rate not less than 2% by weight of cement or as per manufacturer’s instruction. Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co or their authorized dealer. (iii) Cost of the above aspects shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.
All as per item No 8 here-in-above, but 50mm thick
Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & as directed.
M&L PCC solid building blocks 10 Cm thick type B1 1:2:4 set in cement mortar (1:6) all as specified and directed.
M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complate all as specified and directed.
All as per item No 12 here-in-above, but except stone complate all as specified and directed.
M & L Precast cement conerete 1:2:4 type B1 using 20 mm graded stone aggregate as in block masonry with solid block exc 10 CM width and setting in cement cortar 1:6 complete all as specified and directed.
Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified and directed.
Taking down cement plaster or cement lime plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer in charge
M&L 15mm thick cm (1:6) rendering on fair faces of stone surfaces finished even & smooth without using extra cement complete all as specified and as directed…
M&L 15mm thick cm (1:4) rendering on fair faces of stone surfaces finished even & smooth without using extra cement complete all as specified and as directed...
Material and labour for rendering 10mm thick cement mortar 1:3 on concrete surfaces on ceiling/facia/RCC chajja etc finished even and smooth without using extra cement all as inclisive scaffolding, julla as reqd and completed as per direction of Engr in Charge.
M&L GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joist etc in wall, ceiling stanchions beams etc including all laps,cutting and waste complete all as directed
M&L Preparation of new plastered surfaces of ceiling and applying 3 coats of white wash.
M&L Preparation of old plastered surfaces of ceiling and applying 2 coats of white wash.
M&L preparation of newly plastered surface and applying two coat of cement based paint over a coat of alkali resistant primer complete all as directed
M & L for preparation of newly plastered surfaces on wall applying two coat of oil bond distemper over two coat of birla white putty complete allas specified anddirected by Engineer -in- Charge.
M&L for preparation of old decorated surfaces plastered or unplastered on walls including cornices pilasters by brooming down or steel wire brushing and efforescent salts and applying one coat of distemper oil emulsion complete all as specified and directed by Engineer-in-Charge
Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified
M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.
M/L one coat of colour wash on old surfaces including preparation complete all as specified & directed.
M/L two coat of colour wash on new surfaces including preparation complete all as specified & directed.
Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified & as directed.
M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring,path , sub foundation etc complete all as specified and directed.
M&L 50mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in plinth protection or similar places, without using extra cement complete all as specified and directed.
M&L 50 thick PCC (1:2:4)Type B-1 using 20 mm graded stone aggregate for water tank plinth all as specified and directed.
M & L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.
M & L applying one coats of synthetic enamel paint on old steel surface of any description over 10 cm width or girth including preparation of surfaces complete.
S&F mild steel work as in doors frames using MS angle iron Fe-410-W(Gde-E-250) Quality A complete all as directed.
M & L for mild steel framed work as in brackets etc for cooler stands , chajja frame etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc complete all as specified & directed .
Complete removal of folliage/vegitation growth on building and in over accessible/ non accessible roof ,chajjas. Wall and simillar surfaces etc. and making good the surfaces, area of each job not exceeding 1.00 Sqm including disposal of debris to distance n exc 50m of area fo complete all as specified and as dirrected. (Note:- Appx height of the buildings 7.00Mtrs)
Repair to steel window including taking down, replacement of unserviceable hinging device box type , handles, making them in serviceable condition and re-fixing in same opening including making soffits and jambs in CM 1:4 complete all as directed of Engr in charge satesfacation.
Demolition of existing water proofing Treatment including PCC padding etc and cleaning roof surface etc preparing the surface to receive plaster /PCC by brushing with wire brush and fanning the surface to remove all loose dirt etc .
Material and labour for providing cement concrete (1:2:4) type BO using 12.5mm graded crushed stone aggregate as over roof for making good depression/undulation to make the existing as filling in depression of roof slab for receiving treatment of roof complete all as specified and directed.
M&L for PCC 1 : 2 : 4 type B0 using 12.5 mm graded stone aggregate as in roof kerb including weathering, slightly rounded or chamfered angles and throating all as directed etc
M& L for roof treatment in the following stages :- (a) First Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weight 3.00Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 1.40 Sqm and grooved shall be filled with bitumen mastic
Supply only Integral water proofing compund
Cutting out existing cracks in 'V' sction 6 mm and 10mm gap in existing roof our terrace, cleaning and filling solidly with a hot mixure of bitumen and clean dry sand in ratio (1:1 by weight) all as specified).
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified and directed.
M&L for 35 to 40mm thick sand stone slabs as in chajjas n.exc 2m in lengthmachine cut on face and along exposed edges ,self faced on other side and set and pointed in cm 1:4 all as specified and directed.
M&L for Jodhpur stone roof slabs self faced 7.5cm to 10cm thick , 25cm to 35cm wide ,hoisted and set jointed and grouted in cm 1:3
Meterial and labour for rolled section as in sun shed main cross beams hip and jack rafters purlins, chajja etc where connected to common rafters and running rails and guides for sliding doors fixed with angles cleats or other connecting plates FE 410-0 or Fe 210-0 as per directed.
Disconnecting of old serviceable PVC tank (upto 500 Ltr cap) setting aside (or lowering if required) including repair cleaning etc and hoisted in same location including reconnection and refixing for proper functioning of over head tank complete all as directed.
Disconnecting of old serviceable PVC tank (exceeding 500 ltr cap) setting aside (or lowering if required) including repair cleaning etc and hoisted in same location including reconnection and refixing for proper functioning of over head tank complete all as directed.
S & F in PVC water tank lead cover 500 ltrs/1000 ltrs fixed with screw ,G I wire with sutable arrangement as per direction of Engr in Charge .
S & F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.
Demolition of reinforced cement concrete of any description for Chajja , railing, ladder , facia , manhole cover, colums , self slab of type, other places etc complete all as specified and directed.
S&F mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straidgt portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for foof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling boltinh or riveting etc and similar work confirming to Fe 410-0 or fe 310-0
Dismantling structural steel work including doors, gates etc complete all as specified and directed.
Taking down steel water tubing and connections, including cleaning for refixing or remove to store all as specified of following size.
15 mm dia
20 mm dia
Supply & Fixing water tubing medium grade galvanised with all fittings fixed to wall of following size;-
15 mm dia incl cutting chasing pinning and making good ofdisturb portion complete.
20 mm dia
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)
15 mm dia
20 mm dia
M& L for Providing precast cement concrete Type B-0 1:2:4 (12.50mm graded aggregate) set in cement mortar 1:4 for louvres and jallie, cement grill any type moddle of Zafri 25/35mm thick (measured solid), including all mould- ings complete all as specified and directed.
ABHOG INFRASTRUCTURE PRIVATE LIMITED
M/S KAUTILYA GARG
JB INFRA
M/s Ajay kumar Garge
mahalaxmi enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .