Loading…
Loading…
Tender Value
₹43.1 L
EMD Value
₹86,100
Closing Date
22 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GENERAL
13 conditions · 2 needing a document upload
The Tenderer should have valid "Electrical License(LT)" issued by Electrical Licensing Board of any state. The license should have been issued on a date prior to the date of tender opening. NOTE: Non submission of valid "Electrical contract License" by the bidder shall result in summarily rejection of his/their bid.
The Tenderer should have valid "Electrical License(LT)" issued by Electrical Licensing Board of any state. The license should have been issued on a date prior to the date of tender opening. NOTE: Non submission of valid "Electrical contract License" by the bidder shall result in summarily rejection of his/their bid.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
25 conditions · 12 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. In case of Partnership firm / Joint Venture (JV) / Hindu Undivided Family(HUF) / Limited Liability Partnership(LLP)or Partners of Partnership firm/LLP/etc., the firm should submit the valid Power of Attorney, Partnership Deed/Article of Association/Memorandum of Association, Board of Resolution, Certificate of Incorporation along with the tender. If the firm is sole proprietor firm, the bidder should submit the supporting document of sole proprietorship firm.
tenderer should quote his offer along with GST and other taxes
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
For all the tenders having advertised cost of Rs 10 lakh or above, the contractor shall have the option to take payment from Railways through a letter of credit (LC) arrangement. The tenderer shall affirm having read over and agreed to the terms and conditions of the LC option. ivThe above option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter, during execution of contract. (The Tenderer should be submit his/their opinion for taking payment through letter of credit (LC) arrangement).
The Bid Security shall be rounded off to the nearest 100. This Bid Security shall be applicable for all modes of tendering. Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Bid Security detailed above. Labour Cooperative Societies shall submit only 50% of above Bid Security detailed above. Subject to exemptions provided above document, the tender must be accompanied by a Bid Security as mentioned, failing which the tender shall be summarily rejected.
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self-attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self-attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating his/their tender.
A certificate may be uploaded along with the offer that the Tenderer(s) has/have gone through all the conditions of contract and rates, specifications, etc. embodied in Indian Railway Standard General Condition of Contract-2022 with correction Slips up to the date of closing of the tender.
1.The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway there under. 2.a) In case of any information submitted by tenderer is found to be false forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Bid Security besides banning of business for a period of upto five years. (b) In case of any information submitted by tenderer is found to be false forged or incorrect after the award of contract, the contract shall be terminated. Bid Security, Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto five years.
FAMILARISATION: Tenderer should visit the site of the above works and have familiarized him self/them selves of the working conditions therein in all respects and in particular the following: 1. Topography of the area, 2. Conditions at the site of work, 3. Availability of local labour, both skilled and un skilled and the prevailing labour rate, 4. Availability of Water and Electricity, 5. The existing roads and access to the site of work, 6. Availability of space for putting labour camps, offices, stores, go down, engineering yard etc. NOTE: The FAMILARISATION certificate shall be submitted by the tenderer as per format attached at Annexures.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. In case of Partnership firm / Joint Venture (JV) / Hindu Undivided Family(HUF) / Limited Liability Partnership(LLP)or Partners of Partnership firm/LLP/etc., the firm should submit the valid Power of Attorney, Partnership Deed/Article of Association/Memorandum of Association, Board of Resolution, Certificate of Incorporation along with the tender. If the firm is sole proprietor firm, the bidder should submit the supporting document of sole proprietorship firm.
The tenderer should go through all the eligibility conditions (like Special Technical Criteria, Standard Technical Criteria, Standard Financial criterial etc.) as mentioned in the document and submit relevant documents and fill the enclosed formats/annexures in support of the condition. All the documents should be in legible format.
1)Illumination works in connection with "Construction of LHS (Limited Height Subway) on UP line at Km 183/24-25 between Suku - Koraput stations under the jurisdiction of ADEN/KRPU on KK Line of Waltair Division"..2) Illumination works in connection with "Proposed construction of Limited Height Subways (LHS) (i) at Km. 243/20-22 in lieu of LC No. KK-55 at Km. 243/22-24 between Dhanapur and Khadapa stations and (ii) at Km. 273/10-12 in lieu of LC No. KK-71 at Km. 273/18- 20 between Ambagaon and Amagura stations on KK-II line of Waltair Division"3)Illumination works in connection with "Construction of LHS on DN line at Trespassing location Km.197/40-42 between MVF-JRT under the jurisdiction of ADEN/KRPU in KK-I line of Waltair Division". 4)Illumination works in connection with "Construction of Limited Height Subway in lieu of Manned Level Crossing no.KK-14 at Km 24/2-0 in between SUP-LKV stations under the jurisdiction of ADEN/ARK on KK line of Waltair Division". 5) works in connection with "Construction of LHS in lieu of Manned LC no.KK-17 at ch.27.615 in between SUP-BDVR stations under the jurisdiction of ADEN/ARK on KK line of Waltair Division". 6)Illumination works in connection with "Construction of Limited Height Subway in lieu of Manned Level Crossing no.KK-13 at Km 22/16-18 in between SUP-LKV stations under the jurisdiction of ADEN/ARK on KK line of Waltair Division". 7)Illumination works in connection with "Provision of 2.5x2.5 RCC box for RUB at km.862/29A-31A, access to the burial ground of Sharma Shakthi Nagar public between PDT-SCMN on the main line under ADEN/Track/WAT"
VSKP-ELECTG-26-27-WC-03
VSKP-ELECTG-26-27-WC-03
Open
Works - General
240 Days
Visakhapatnam, Andhra Pradesh
₹0
₹86,100
22 May 2026
1 May 2026
8 May 2026
319 items across 7 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 5,70,105.49 | ||
| — | 8.00 | — | — | ||
| Erection, testing and commissioning of Street light fitting in SST/GRP pole/GI octagonal pole/bldg/ structure. | — | — | — | 1,600.72 | |
| — | 8.00 | — | — | ||
| Supply, erection and commissioning of 5 Meters length GI octagonal pole with all accessories with necessary RCC foundation etc. as per explanatory notes. | — | — | — | 1,00,580.08 | |
| — | 8.00 | — | — | ||
| Supply, erection, testing and commissioning of All-in-one Solar Steet Light System 25W LED, IP:65 or better, Power output of PV module: >/=75Wp, LiFeP04 Battery capacity >/= 12.8V (nominal), 30 Ah, provided with 2 LED indicators for chaning in progress, deep discharge condition, 7m height pole, nominal bore size/thickness: 65mm/4.5mm, battery box: battery included in the luminaire enclosure and corrosion resistant, with solar PV modules with efficacy >/=75Wp at 16.4+/-0.2 V at STC, necessary control electronics, interconnecting wires/cables, module mounting structures etc. to operate from dusk to dawn etc. as per other conditions in specification similar to model No. Havells 7. Price also include cost of concrete foundation, erection of lighting sytem with grouting bolt etc. for commissioning of the entire system. | — | — | — | 1,78,944 | |
| — | 1.00 | — | — | ||
| Supply, Erection, Testing and Commissioning of out door feeder pillar consisting of copper bus bar 100Amp with LED type indication lamps for RYB inincoming side in a CRCA sheetwith double door provision & locking arrangement. The panel shall be consist of :I/C: 1X63A MCB 4P 10KA, 3X32A MCB 10KA and 2x16A MCB 10KA on Out Going Sde with 2Nos. Single Phase DOL Starters for Sumbersible Pumps with timer & contactor with required wiring etc. of size:700mmX600mmX350mm approx,sheet: 1.6mm thick, Angle:40x40x6mm, Channel:75X40mm). Erection price also includes required brick work. | — | — | — | 21,337.64 | |
| — | 5.00 | — | — | ||
| Double cable laying along the road/track | — | — | — | 2,052.1 | |
| — | 10.00 | — | — | ||
| Double cable laying across the road/track | — | — | — | 10,458.1 | |
| — | 550.00 | — | — | ||
| Single Cable Laying Along the road/Track | — | — | — | 2,03,362.5 | |
| — | 20.00 | — | — | ||
| Single Cable Laying Across the road/track | — | — | — | 12,635.8 | |
| — | 10.00 | — | — | ||
| Laying of Cable in open air / culvert | — | — | — | 311.1 | |
| — | 10.00 | — | — | ||
| Cable Laying Through HDPE Pipe. | — | — | — | 287.2 | |
| — | 5.00 | — | — | ||
| Earthing arrangement | — | — | — | 16,955.55 | |
| — | 1.00 | — | — | ||
| Supply & erection of outdoor type MS/FRP loop in loop out box made of 1.6mm thick MS sheet/FRP of size 200X150X100mm & 4way stud connector with provision of door in front side with locking arrangement | — | — | — | 1,511.28 | |
| — | 20.00 | — | — | ||
| Supply & erection of cable route marker | — | — | — | 1,804.6 | |
| — | 10.00 | — | — | ||
| Supply and erection of HDPE pipe 90mm dia., PN-4, PE-80 as per IS-4984:2016 with required clamps and fasteners for raising of Railway supplied UG Cable through pipe at DP Structures etc. | — | — | — | 2,184.9 | |
| — | 8.00 | — | — | ||
| Supply and fixing of ceiling rose | — | — | — | 107.36 | |
| — | 5.00 | — | — | ||
| Laying of XLPE LT Cable along the concrete floor /black top road by cutting floor/black top road without GI pipe. | — | — | — | 396.7 | |
| — | 5.00 | — | — | ||
| Cable fixing on wall by cutting of wall. | — | — | — | 260 | |
| — | 40.00 | — | — | ||
| Supply & laying of PVC rigid Conduit pipe 25mm outer dia (Heavy) on truss with proper saddles/GI clamps. | — | — | — | 2,702 | |
| — | 8.00 | — | — | ||
| Supply and fixing of PVC/GI circular box/RJ box / square junction box on wall/roof/truss with proper clamps. | — | — | — | 369.04 | |
| — | 40.00 | — | — | ||
| Concealed/surface wiring with (2x2.5+1x1.0 sqmm) FRLSH PVC copper wire 1100volt grade (without supply and laying of pipe) on truss/roof/ wall. | — | — | — | 2,958.8 | |
| — | 8.00 | — | — | ||
| Supply, erection, testing and commissioning of 10W Indoor/Outdoor LED Bulk Head fitting, IP-65, Beam angle= 80 degree, Power factor=0.95 Minimum, 6500K, 100lumens/W, polycarbonate body with bracket for erection. Make: Philips, Bajaj, CG, Eveready, Wipro, Jaquar. | — | — | — | 5,109.12 | |
| — | 70.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
AnnexuresPrescribedforms.pdf
ATTACHMENT
GeneralConditionsofContract2022.pdf
ATTACHMENT
InstructionstoTenderer.pdf
ATTACHMENT
MAKESANDSPECIFICATIONS_1.pdf
ATTACHMENT
Foundationdrawings.pdf
ATTACHMENT
Specialconditions.pdf
ATTACHMENT
TenderFormSheets.pdf
ATTACHMENT
NIT.pdf
ATTACHMENT
SCHEDULEEXPLANATORYNOTES.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .