SPECIAL REPAIR TO BLDG NO 03 OF 2 CORPS OMC UNDER GE (SOUTH) AMBALA CANTT

Amount

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area not exceeding 1.5 Sqm each and removal from site including iron mongry hold fasts etc., complete all as specified and directed by Engineer-in-charge.

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area exceeding 1.5 Sqm and not exceeding 4.00 Sqm each, complete all as specified and directed by Engineer-in-charge.

Taking down shutter of any descritption exc 1.00 sqm each but not exc 2.00 sqm each including removal from site, complete all as specified and directed by Engineer-in-charge.

Steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 and TD-220(c) sheet 1/3 to 3/3 as applicable complete inclusive of guared bars 12mm square bar including taking down old unserviceable windows , complete all as specified and directed by Engineer-in-charge. Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery (iii) Glazing, wire mesh & painting grill shall be measured & paid for separately.

Supply and fixing Steel windows or ventilators, fixed type, with glazing bars , complete all as specified and directed by Engineer-in-charge.

Supply and fixing 3mm Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each and glazing with beads fixed with metal panel pins , complete all as specified and directed by Engineer-in-charge.

Supply and fixed Pressed steel frames for doors of size 125mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, supplied and fixed, complete all as specified and directed by Engineer-in-charge.

Supply and fixed Pressed steel frames for doors of size 165mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, supplied and fixed, complete all as specified and directed by Engineer-in-charge.

Material & Labour IInd class hardwood factory made 30mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) supplt and fixed to choukats complete all as specified and directed by Engineer-in-Charge at site.

Supply & Fixed for galvanized mild steel wire cloth with 0.63mm nominal dia of wire and average width of aperture 1.40mm fixed with finned tacks or galvanized wire staple complete all as specified and directed by Engineer-in-charge.

Supply and fixing for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides completeface is covered with decorative face veneer with lipping/frame to match , complete all as specified and directed by Engineer-in-charge.

Supply and fixing factory made 35mm thick 2nd class hardwood plain frame paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rails stile as per I:S:1003 (Part I) kiln seasoned and chemically treated, complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint(first quality) over a coat of primer complete all as specified and directed.

Material and labour for painting surfaces of wood (new) for any description not otherwise described over 10cm width of girth by applying two coats, of synthetic enamel paint over a coat of wood primer including preparation complete all as specified and directed by Engineer-in-charge.

Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed by Engineer-in-charge.

S &F Aluminium alloy, anodised,sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts , complete all as specified and directed by Engineer-in-charge.

Supply and fixing 100mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete if fixed to steel/ concrete chowkats with flat iron 40x3 mm size 75 cm long with necessary bolts, etc. complete as inrepairs, complete all as specified and directed by Engineer-in-charge.

Supply and fixing as in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed by Engineer-in-charge.

Supply and fixing Sheet glass, 3mm ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and sheet glass is ground or obscured or frosted, on one side incl Hacking out old broken glass, complete all as specified and directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer-in-charge.

Material & Labour for Vitrified coloured tiles 7 to 8 mm thick dark shade (square/ rectangular) area of each tile exceeding not exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:4) base, complete all as specified and directed by Engineer-in-charge.

Material and labour for coloured designed 600x300x7mm thick glazed ceramic tiles on vertical surfaces such as skirting dado and risers to step etc including backing coat of 10mm thick rendering in CM ( 1:3) set and jointed in neat cement slurry and pointed in white or coloured cement to match completed as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all pillars, quoins etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed by Engineer-in-charge.

Material and Labour for Brick work with sub class ‘B’ bricks , straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:6), complete all as specified and directed by Engineer-in-charge., complete all as specified and directed by Engineer-in-charge.

Supply & fixed ( in repair) CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed by Engineer-in-charge. (Note : Weight of bib tap shall not be less than 0.575 Kg).

Dismantling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /slabs/ blankets, any thickness, including cover fillets, as in false ceiling etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing of semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 475 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm including both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm. galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge including dismantling existing asbestos sheet false ceiling textile coverings including frames (if any) and cover fillets complete all as specified and directed.

Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including dado any description , complete all as specified and directed by Engineer-in-charge.

Material and labour for 15 mm thick rendering on faces of brick or concrete surfaces in CM 1:4 . finishing the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge.

Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth, complete all as specified and directed.

Material and Labour for preparation of exposed brick wall surface by cleaning the surface wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks. Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day, complete all as specified and directed by Engineer-in-charge. NOTE : - Further treatment over the surface so achieved will be carried out only after approved of the same by GE.

Material and labour for rough cast plaster on exterior walls in two layers, under layer 10mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm Rough cast plaster with sand gravel as specified as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the surface , complete all as specified and directed by Engineer-in-charge.

Material and labour for two coats of cement base paint over a coat of alkali resistant primer of new surfaces of walls and incl preparation complete all as specified and directed by Engineer-in-charge.

Material and labour for preparation new plastred surfaces of wall and applying two coats of oil bound distemper over a coat of primer applying with roller etc , complete all as specified and directed by Engineer-in-charge.

Material and labour for preparing old surface on wall and applying one coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-charge.

Material and labour for preparating old plastered of wall and applying one coats of oil bound distemper incl chalk whitener etc , complete all as specified and directed by Engineer-in-charge.

Material and labour for preparing old decorated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint , complete all as specified and directed by Engineer-in-charge.

Material and labour for preparing old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint , complete all as specified and directed by Engineer-in-charge.

Supply & fixing in repair mild steel 25 mm tubular rod in plumet rod, 1.6mm fancy type including golden colour brakets,latto and wall to wall socket etc complete all as specified and as directed by engineer-in-charge.

Supply and fixing 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete if fixed to steel/ concrete chowkats with flat iron 40x3 mm size 75 cm long with necessary bolts, etc. complete as inrepairs

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete as all specified and directed.

Material and labour for PCC in 1:3:6 type C-1 (using 20mm graded mechanically crushed stone aggregate) 50 mm thick as in plinth protection, path. finished even and smooth without using extra cement with and including 10mm wide, 30mm deep joints @ 3mtr centre to centre and filling joints with 85/25 bitumen and sand mixture (1:3 ratio) applied hot complete all as specified and directed.

Supply and fixing (in repair) partly glazed aluminium alloy anodized (powder-coated) partition (Area of each panel not exceeding 1.5 Sqm each) with frame of size not less than 100 mm x 44.4 mm x 2 mm including packing with rubber gasket, standard aluminium beading around both sides including 6mm thick plain coloured bakelite sheet or acrylic boards, prelaminated both side with one side decorative choice lamination for fixing in bottom panel of aluminium partition as required complete all as specified and directed. Notes :- 1. Glass pane shall be measured and paid separately.

Supply and fixing (in repair) aluminium alloy anodized (powder-coated) door frame and partly glazed shutters with hollow aluminium anodized sections including 6mm thick plain coloured bakelite sheet or acrylic boards, prelaminated both side with one side decorative choice lamination for fixing in bottom panel as specified including aluminium alloy anodized snap type beads, dish type door handles, glazed clip, jointing cleats, rubber packing, gasket, dead lock 4 levers, 02 Nos aluminium alloy anodized tower bolts to each leaf etc. including fixing frame to wall/RCC members etc. with rawl plugs complete all as specified and directed. Sections of frame and door shall be as follows : - (a) Door Frame single groove 101.6 mm x 44.45 mm x 2.15mm thick (b) Shutter top 47.62 mm x 44.45 mm x1.95 mm thick. (c) Shutter bottom 114.30 mm x 44.45 mm x 2.1 5mm thick. (d) Shutter vertical 85 mm x 44.45 mm x 1.80 mm thick. (e) Shutter middle 83.5 mm x 44.45 mm x 2.40mm thick. (f) Gauging clip weighing not less than 0.097kg/metre. Notes :- 1. Glass pane shall be measured and paid separately.

Supply and fixing (in repair) aluminium alloy anodized (powder-coated) window frame with double shutters open able type, with aluminium sections as specified for casement windows with double shutters including aluminium alloy anodized snap type beads, handles, stainless steel hooks and eyes, aluminium anodized barrel tower bolts, glazing clips, joint cleats, rubber packing, gaskets etc for series-B “ Jindal” section numbers for casement window.complete all as specified and directed comprising of followings :- (a)Frame of section 101.6mm x 44.45mm x 2.10 mm thick and section for shutter 47.62 mm x 44.45 mm x1.95 mm thick. (b) Mullion 53 mm x 52 mm x 2 mm thick not less than 1.065 kg/mertre. (c) Glazing clip weighing 0.259kg/mtr. (d) Window shall be provided with 02 Nos. of tower bolt for single leaf and 03 Nos. of tower bolts for double leaf. Tower bolts shall be aluminium alloy anodized weighing 0.302kg/mtr. Handles shall be aluminium anodized ‘D’ type handle of size 98 mm and thickness 2.37mm weighing 0.875kg/mtr and 01 no for each open able leaf. Notes :- 1. Glass pane shall be measured and paid separately.

Supply and fixing 5.5 mm thick tinted glass in square exc 0.5 sqm in each pane with heat reflecting properties , fixed to aluminium frame with glazing clips, etc, complete all as specified and directed by Engineer-in-charge.

Supply and fixing of anodised aluminium grill of daimond size 100x100mm of dia 6mm including necessary joining cleats, anodised aluminium snap beading screws, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair 5mm thick hollow interlocking wall panelling of width 250mm for wall panelling for fixing on to wall with screws and solvent alonghwith corner and u channel beading of colour choice including diamantling old beading/panelling , complete all as specified and directed by Engineer-in-charge. Note : Rate will be inclusive of any electrical fitting /board effected and refixing the same after rectification

Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings, complete all as specified and directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description specifically provided for gates, staircase railings, framed truss etc complete all as specified and directed, complete all as specified and directed by Engineer-in-charge.

Dismantling timber scantling 40 sq.cm in section , complete all as specified and directed by Engineer-in-charge.

Supply and fixing,structural rolled mild steel Fe 410-00 (Gde E-250) as in roof trusses(framed), trussed, purlin,, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, agnle, channel or flat section)including distance pieces, cleats etc , complete all as specified and directed by Engineer-in-charge.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer, complete all as specified and directed by Engineer in charge.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer, complete all as specified and directed by Engineer in charge.

Dismantling/taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc. , complete all as specified and directed by Engineer in charge.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (FIRE Retardant Low Smoke and low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic,medium grade PVC concealed conduit not less than 20mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI metal flush boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly coated with two coats of anti corrosive paint including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over metal flush boxes for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan / Bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (FIRE Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan point/bell point controlled by one switch , complete all as specified and directed by Engineer in charge. NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately. 2. All chases will be cut by chase cutter only.

Description all as per item No 58.00 here in before but for socket out let point 5 Amps on same board , complete all as specified and directed by Engineer in charge.

Description all as per item No 58.00 here in before but for socket out let point 5 Amps on independent board , complete all as specified and directed by Engineer in charge.

Description all as per srl item No 58.00 here in before but point wiring for one socket out let 15&5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor No 58.00, , complete all as specified and directed by Engineer in charge.

Supply and fix modular switches, one way, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed by Engineer in charge.

Supply and fix modular switches, one way, 16Amps, one module, 230 volt , AC supply, complete all as specified and directed by Engineer in charge.

Supply and fix modular socket outlet 6 amps, 2/3 pin combined 2 module, 230 volt, complete all as specified and directed by Engineer in charge.

Supply and fix modular socket outlet 6/16 amps,3 pin, 2 module, complete all as specified and directed by Engineer in charge.

Supply and fix fan regulator step type one module / 2 module, 100w 230 Volts, 50 Hz, AC , complete all as specified and directed by Engineer in charge.

Supply and fix modular switches, bell push, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed by Engineer in charge.

Supply and fix modular blanking plate 1 module , complete all as specified and directed by Engineer in charge.

Supply and fix ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed by Engineer-in-charge.

Supply and fix door bell electric ,ding dong /musical type, single phase 230 volts, ISI marked complete all as specified and directed by Engineer-in-charge.

Supply only lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed by Engineer in charge.

Supply and fix sheet metal enclosure SP with two pin and earth plug and socket inclduing metal clad top with one single pole MCB 32 Amp , complete all as specified and directed by Engineer in charge.

Supply and fixing of LED light fitting 1x20W (lumen efficacy of >100 lm/W) , 220V, AC with aluminium housing with batten type with driver , holder including 20W LED tube light for connecting up with three core flexiable copper conductor cable of suitablae size from celing rose to connector, complete all as specified and directed by Engineer in charge.

Supply and fix batten type with surface mounted LED tube light fitting with high efficient diffuser mirror light,aluminium housing in CRCA body suitable and including 10 watt LED tube rod high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position , complete all as specified and directed by Engineer in charge.

Supply and fix bulk head light fitting, 10 watt, energy efficient with lamp 10 watt with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting complete including disconnecting and taking down old existing light fitting of any description , complete all as specified and directed by Engineer in charge.

Supply and fix bracket for security light made up of 25/40/50mm dia suitable for security light, 0.6 metre long GI pipe, light grade, 120 degree bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts , complete all as specified and directed by Engineer in charge.

Supply and fix LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDs having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position, complete all as specified and directed by Engineer in charge.

Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 6sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia New concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 6 sqmm, green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface , complete all as specified and directed by Engineer in charge. NOTE:-3 run of 6.0 sqmm cable with concealed conduct shall be measured as 1 unit.

Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 4 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia New concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 4 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface , complete all as specified and directed by Engineer in charge. NOTE:- 3 run of 4.0 sqmm cable with concealed conduct shall be measured as 1 unit.

Supply and fixing in repair sheet metal enclosures vertical distribution board VTPN,(MCCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole thermal release type ,125AMPS ,25 KA as incomer and MCB s as out going complete with making suitable size of MS cabinet 1.2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface , complete all as specified and directed by Engineer in charge.

Supply and fixing in repair SPN distibution board 8 way, double door, IP 43, as per IS 8623 including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles /gland/gaskets , complete all as specified and directed by Engineer in charge.

Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 6 to 32 Amps, ISI , complete all as specified and directed by Engineer in charge.

Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 40 to 63 Amps, ISI marked , complete all as specified and directed by Engineer in charge.

Supply and fixing in repair MCB single pole and neutral 240 volts, 40 to 63 Amps,10KA, 50 Hz, 'B' Series , complete all as specified and directed by Engineer in charge.

Supply and fixing recess/ surface mounted LED flat panel 2' x 2' with high efficient LEDs and glare free full decorative light fitting, 36 watt, energy efficient provided with including LED 36 watt with provision of 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting and complete including disconnecting and taking down existing light fitting and removal , complete all as specified and directed by Engineer in charge.

Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire 4 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) Taking out old unserviceable earthing , complete all as specified and directed by Engineer in charge. NOTE : - The rates for earth work, GI protection pipe, funnel, wire wesh, CI cover, etc shall be deemed to be including in quoted rates.

Supply and fixing of LED lamp 9 watt B-22 base complete including taking down old existing lamp any type , complete all as specified and directed by Engineer in charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium, stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed twin core 25sqmm 4 core nominal cross section in service connections , complete all as specified and directed by Engineer in charge.

Excavation in trenches in soft/loose soil n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation of poles,cable laying etc, including forming bottom surface to required level and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in soil/loose soil including spreading, leveling,watering & well ramming in layers not .exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing of surplus spoil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

Material and labour for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches and punning down complete all as specified and directed by Engineer-in-Charge.

Material and labour cover to underground cable with one layer of bricks using sub class 'B' bricks laid flat acorss the cable complete all as specified and directed by Engineer-in-Charge.

NOTE:- Amount of credit of Rs. 1,41,237.00 for retrieved materials is mentioned in Schedule of Credit Page No 21 & 22 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Swami Enterprises (BID ID -3373822)

Parveen Kumar (BID ID -3381636)

M/S M S BUILDER AND CONTRACTORS (BID ID -3381482)

M/s Gautam Electro Engineers (BID ID -3380568)

S M BUILDERS (BID ID -3388688)

Ashwani Kumar (BID ID -3388616)