Interchange of Co2 & FM200 flooding Systems between Gundala & Kharapashvariya Terminal of Rajkot Base

ANNEXURE 2 : Schedule Of Rate (SOR) GTL/PROC/2026/06/O/496

Category of Registration in GST(Tick whichever is applicable)

Registered (Normal)

Registered (Composition Levy)

Type of Supply Under this Contract (Tick whichever is applicable)

Normal Supply of goods and services

Composite supply

Schedule of Rates

Sr No Description Goods/Services HSN (Eight digit) Qty Unit of Measurment Unit Rate Note 4 Total Basic Amount Rate of GST Total tax amount Gross Amount

SGST/UTGST CGST IGST CESS

A B C D E F G = D X F H I J K L M = G + L

Item Specification

1 Pipe Size: 40mm Ø- 48.30 mm OD, 5.08 mm thickness Type : SCH 80, Body material:ASTM A106 Gr. B, Hydrotest pressure: 2700 PSI Max 49 Meter

2 Pipe (for Header) Size: 80mm Ø- 88.90 mm OD, 7.62 mm thickness Type : SCH 80, Body material:ASTM A106 Gr. B, Hydrotest pressure: 2700 PSI Max 4 Meter

3 Pipe Size: 25mm Ø- 33.40 mm OD, 4.55 mm thickness Type : SCH 80, Body material:ASTM A106 Gr. B, Hydrotest pressure: 2700 PSI Max 12 Meter

4 COUPLING FCS S/W COUPLING-3000 # CLASS ASTM A 105 25 MM DIA 7 No

5 COUPLING FCS S/W COUPLING-3000 # CLASS ASTM A 105 40 MM DIA 12 No

6 COUPLING FCS S/W COUPLING-3000 # CLASS ASTM A 105 80 MM DIA 3 No

7 END CAP FCS S/W END CAP-3000 # CLASS ASTM A 105 80 MM DIA 2 No

8 END CAP FCS S/W END CAP-3000 # CLASS ASTM A 105 40 MM DIA 5 No

9 EQUAL TEE FCS S/W EQUAL TEE-3000 # CLASS ASTM A 105 25 MM DIA 5 No

10 EQUAL TEE FCS S/W EQUAL TEE-3000 # CLASS ASTM A 105 40 MM DIA 5 No

11 ELBOW FCS S/W ELBOW-3000 # CLASS ASTM A 105 25 MM DIA 10 No

12 ELBOW FCS S/W ELBOW-3000 # CLASS ASTM A 105 40 MM DIA 10 No

13 Main Discharge Hose Make-Parker Markwel (or compatible to existing installed make) Size: 1/2" Ø, BSP (F) at Both End, Length 610mm Working pressure: 300 Bar Hydraulic Test pressure: 450 Bar Working Temp range: -40 to 120 deg C 4 No

14 Inter connecting (Actuation) Hose Size - 1/4" Ø, BSP(F) At Both End Working pressure - 225 bar, Working Temp range: -40 to 120 deg C Bust pressure - 900 bar, Bending redius-130 mm 4 No

15 Check valve (NRV) Size - 1" BSP(M) X 1/2" BSP(M), Make: Tube Fit Instruments Conrol (or compatible to existing installed make), Operating pressure :100 Kg/Cm2, Threads: According to ISO 228 4 No

16 50*50*6 M.S. Angle For Stand Modification 50*50*6 M.S. Angle-Approx 9mtrs 40.5 Kgs

17 50*5 MM THICK FLAT For Stand Modification 50*5 MM THICK FLAT-Approx 5Mtrs 10 Kgs

18 Online Gas cylinder weighing system Make:Semitronik Instruments Part No-FA007 Low Weight indication-LED, 24VDC Channel Mounted 45 X 235 MM Neck Road-215MM Including Neck Ring All Cylinders Online Weighing system Looped & Connected to Fire Alarm Panel 4 No.

Part B-Component of Service

19 Dismantling Dismantling of piping, fittings , FM-200 Cylinders, Directional valves, Nozzles of Fire Alarm & FM-200 flooding system except Detectors, its wiring and Panel & Safely shifting to other location 1 Lot

Dismantling of piping, fittings, CO2 cylinders with stands, Directional valves, Nozzles of Fire Alarm & CO2 flooding system except Detectors, its wiring and Panel Safely shifting to other location 1 Lot

20 Installation Installation of piping , fittings, FM-200 Cylinders, Directional valves, Nozzles for FM200 flooding system including all cable Glanding & terminations 1 Lot

Installation of piping, fittings, CO2 cylinders with stands, Directional valves, Nozzles for CO2 flooding System Including all cable Glanding & terminations 1 Lot

21 Pneumatic/Hydro testing Pneumatic/Hydro testing of piping as per NFPA and submission of reports 2 Lot

22 Pre commissioning/ Commissioning Pre commissioning and commissioning of system after required modification work 2 Lot

Total Amount (In Words):

1 In case of vendors registered under composition levy scheme separate charge of GST shall not be applicable.

2 Bidder to submit price bid in separate sealed envelope. If price mentioned other then price bid stage, the bid of such bidder shall be rejected.

3 No separate discounts are to be mentioned. Discount, if any, should be merged in the quoted price

4 Quoted rate shall be inclusive of taxes, duties, local levies / transportation/ loading/ Installation and Commissioning charges etc. and inclusive of all charges for execution of work/ service in accordance with Scope of Work, Technical specifications, other provisions of tender and instructions of Owner/Owner's representative, including but not limited to carrying out the above work /services.

5 Bidders should strictly quote as per price format only. Any bids not conforming to the price bid format shall be rejected.

6 In case of discrepancy between unit price and total price, the unit price shall prevail.

7 GTL reserves the right to reject any bid without any reason whatsoever.

9 Successful bidder/Consultant has to submit proper taxable invoice to get GST credits to client. Any laps of the GST credits due to

improper invoicing by Consultant shall be recovered by Client.

10 Given Schedule of Rates (SOR) to be treated in conjunction with scope of work/services/supply & terms and conditions given along with enquiry documents.

11 The above prices is for the complete scope of wok /services/ supplies as defined in the bid/enquiry document

Any materials, works/services required for completion of the work as per scope but not defined in the SOR (schedule of rates), the same is deemed to be included in the quoted price as above.