e tender for the furnishing work at Malappuram.

Amount

Cement wall Partition : Providing and fixing in position factory made EPS cement sandwich wall/roof/floor light weight solid core panels made of core material of EPS granule balls/beads (conforming to IS 4671:1984 and shall have density not less than 15kg per cum) adhesive, cement, sand, flyash and other bonding material in mortar state processed to form in a preset mould. The outer face on both sides of the panels will be non asbestos fiber cement board confirming to IS 14862:2000 or Calcium silicate board confirming to EN 14306:2009 of 5mm thick each. Panel shall be laid on 6mm thick cement mortar (1 cement: 2 fine sand) mixed with chemical adhesive of 0.5kg per 50kg of cement or shall be preferably fixed into 'C' channel made of 1.2mm thick MS plate screwed/fastenened to the slab /column /beam etc. The panel shall fixed vertically with tongue and groove joint and horizontally locked with steel bar between each other and floors and filled with cement mortar and adhesive. Panels should be used as floor & roofing with additional structural support, steel or RCC depending upon the design. All the operation shall be completed in all respect as per drawings, Manufacturers specifications and under the overall direction of Engineer-in- Charge. Non load bearing panels 100mm thick of required size.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Providing Aluminum Door Supply and Fixing Aluminum Door with Aluminium Section, Door Lock, Particle Board,Glass Plain,Handle,Rubber Beeding And All Materials with Labour Cost

Providing and fixing Modular Work station of size each L 80, W 50, H 75 CM. Arrangement of workstation should be done arond the room say in U shape shall be formed out of 18 mm thick BWR Plywood with 1mm laminate and all exposed edges lipped with PVC edgebanding. lnside portion of the Table will becovered with0.8mm laminate . Keyboard tray with mouse pad shall be formed out of approved sliding channels. CPU provision shall be provided.

Extension of Electrical and network points to 40 seats including all accessories

ATHEN Solutions