Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-AOC | ₹7.0 L | L1 | Accepted-AOC As recommended by committee members and approved by Competent Authority. |
| 2 | L2₹7.9 L+₹90,713.60 (13.0%)Rejected-AOC | ₹7.9 L+₹90,713.60 (13.0%) | L2 | Rejected-AOC As recommended by committee members and approved by Competent Authority. |
| 3 | L3₹8.2 L+₹1.3 L (17.9%)Rejected-AOC | ₹8.2 L+₹1.3 L (17.9%) | L3 | Rejected-AOC As recommended by committee members and approved by Competent Authority. |
| 4 | L4₹8.3 L+₹1.3 L (18.6%)Rejected-AOC | ₹8.3 L+₹1.3 L (18.6%) | L4 | Rejected-AOC As recommended by committee members and approved by Competent Authority. |
Tender Value
Refer Docs
EMD Value
₹8,000
Closing Date
17 Jul 2023, 2:00 pmClosed
Purchase Officer
NIFT Kolkata
Construction of Two storied store room and allied works at NIFT campus Kolkata
2023_NIFT_759514_1
e-03/2023(Pur-Kol)
Open Tender
Civil Works - Buildings
Works
45 days
NIFT Campus
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹8,000
Yes
7 Nov 2023
27 Jun 2023
18 Jul 2023
27 Jun 2023
17 Jul 2023
27 Jun 2023
27 Jun 2023 - 17 Jul 2023
Amount
Repairing and painting works only for interiors at old block and new block, NIFT-Kolkata
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes CPWD, volume 01 (Civil) DSR 2019,10.16.1, Pg. no. 701/ 692
Supplying, fitting & fixing Zn-Al alloy coated (followed by colour coated) steel sheet work having minimum yield strength of 550 MPA of trapezoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 10 mm. dia. J or L hook- bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (payment to be made on area of finished work) (i) in roof: - With 0.45 mm thick all complete PWD, Govt. of West Bengal SR
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces CPWD, volume 01 (Civil) DSR 2019, 10.5.1, Pg. no. 681/ 672
Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes Cement mortar 1:4 (1 cement: 4 coarse sand) CPWD, volume 01 (Civil) DSR 2019, 6.4.1, Pg. no. 286/ 277
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement: 2 coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size) CPWD, volume 01 (Civil) DSR 2019, 4.1.3 Pg. no. 154/ 145
Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. CPWD, volume 01 (Civil) DSR 2019, 11.3.1 Pg. no. 724/ 715
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete CPWD, volume 01 ( Civil) DSR 2019, 5.9.1., Pg. No. 197/ 187
12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand) CPWD, volume 02 (Civil) DSR 2019, 13.1.1, Pg. no. 12/ 897
Providing and applying white cement-based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. CPWD, volume 02 (Civil) DSR 2019, 13.80, Pg. no. 12/ 897
Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) CPWD, volume 02 (Civil) DSR 2019, 13.46.1, Pg. no. 12/ 897
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) CPWD, volume 02 (Civil) DSR 2019, 13.61.1, Pg no 67/ 952
SAP ENTERPRISE
CIVIL CONSULTANT
M/S S A ENTERPRISE
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .