Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.6 LAccepted-AOC PMC 24 528 GROUND FLOOR NEAR PAYYANUR SERVICE CO OP BANK KOTTY BRANCH PAYANNUR KANNUR KERALA 670307 | PAYYANUR | KANNUR | KERALA | 670307 | L1 | Accepted-AOC Being lowest. | |
| 2 | L2₹38.0 L+₹30,850 (0.82%)Rejected-Finance THEKKEKOTTARAM RAMANTHALI PO KANNUR DIST KERALA 670 308 | RAMANTHALI | KANNUR | KERALA | 670308 | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹40.0 L+₹2.3 L (6.01%)Rejected-Finance RP IV 23 PUNNAKADAVU JN RAMANTHALI P O KANNUR 670308 | KANNUR | KANNUR | KERALA | 670308 | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹40.8 L+₹3.1 L (8.15%)Rejected-Finance DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L4 | Rejected-Finance Other than lowest tenderer | |
| 5 | L5₹41.8 L+₹4.1 L (10.7%)Rejected-Finance NO 306 SCION AVENUE 4TH A CROSS KAGGADASPURA NEAR GANAPATHI TEMPLE BANGALORE 560093 | BANGALORE | BENGALURU URBAN | KARNATAKA | 560093 | L5 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
17 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2022_MES_564333_1
GE MAINT EZHIMALA 8523
Open Tender
Civil Works
Item Rate
120 days
EZHIMALA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹88,000
Yes
28 Dec 2022
21 Nov 2022
19 Dec 2022
21 Nov 2022
17 Dec 2022
5 Dec 2022
22 Nov 2022 - 29 Nov 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)/ removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Taking down chowkats with shutter (without taking off shutter from the frame) n exc 1.5 sqm each complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (styles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with particle board core complete all as specified and as directed.
S&F in 150 mm extruded anodised aluminium alloy handles fabricated type complete all as specified and as directed.
S&F in 200 mm anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.
S&F 100mm butt hinges cast brass, with stainless steel hinge pin, bright polished and fixed type B-11 complete all as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300mm complete all as specified and as directed.
M&L for coloured non-skid joint free ceramic tiles (square/ rectangular) 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for coloured non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for glazed ceramic coloured tiles 350x250x7mm / 450x350x7 mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including screed bed 20mm thick in CM 1:6 complete all as specified and as directed.
M&L for machine cut kota stone in riser of steps, skirting, dado and pillar laid 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including screed bed 20mm thick in CM 1:6 complete all as specified and as directed.
M&L for machine cut granite stone slab 20mm thick of approved colour and shade as in floors laid over 20mm thick screed bed in CM 1:6 and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified and as directed.
M&L for vitrified coloured ceramic tiles 10mm thick (square/ rectangular), light shade polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed (using with spacers) in neat cement slurry and pointed with eopxy to match the shade including 20mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L for prepolished laterite stone tiles 20 mm thick in vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed.
S&F in repair vitreous china wash basin, coloured (flat back) 500x450mm excluding pillar tap, but including fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed.
S&F in repairs pillar taps 15 mm size, cast copper alloy, chromium plated screwed down high pressure screwed for iron pipe & fixed complete all as specified and as directed.
S&F in repair vitreous china, wash down water closet (EWC), coloured with seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed.
S&F plastic seat cover in repair (colour) closed pattern with flat bottom suitable for EWC including taking down old cover complete all as specified and as directed.
S&F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets complete all as specified and as directed.
S&F in repair vitreous china urinal, half stall type, coloured, with and including all fixing accessories complete all as specified and as directed.
S&F in repair vitreous china urinal partition, coloured, with and including all fixing accessories complete all as specified and as directed.
S&F in repairs 15mm bore chromium plated bib taps (fancy type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and as directed.
S&F in repair angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and as directed.
S&F urinal spreader of brass chromium plated and flush cock (lever type) 25mm complete all as specified and as directed. Make:- Cat Part No. KBEA -32 of Prayag or equivalent in Parryware/Jaguar.
S&F in repair brass chromium plated towel ring complete all as specified and as directed.
S&F in repair 20mm dia, D type, 60cm long cast copper alloy, chromium plated towel rail complete all as specified and as directed.
S&F in repair cast copper alloy, chromium plated toilet paper holder complete all as specified and as directed.
S&F in repair chromium plated soap tray fixed with CP brass screws complete all as specified and as directed.
S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect all as specified and as directed.
S&F in repairs 32mm dia PVC flexible waste pipe for urinals/WHB/sink complete all as specified and as directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
S&F in repair cast copper alloy, chromium plated waste coupling with long shank , half thread, 32 mm dia, for WHB etc. complete all as specified and as directed.
S&F in repair 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.
M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in gola junction of wall and floor or for settings floor trap/ ‘P’ trap in position and PCC padding in floor complete (work in foul condition as in shaft) all as specified and as directed.
Taking up or down steel tubing and connections, 20mm dia complete all as specified and as directed.
Taking up or down steel tubing and connections, 25/32 mm dia complete all as specified and as directed.
Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
Supplying and laying of 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
Dismantling CI soil waste pipe 110mm/75 mm dia including all joints and branch pieces jointed in cement mortar complete all as specified and as directed.
S&F in repair PVC (SWR) pipes of 100 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S&F PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors of bore 75mm complete all as specified and as directed.
S&F PVC (SWR) bends any radius of bore 75mm complete all as specified and as directed.
S&F PVC (SWR) bends any radius of bore 110mm complete all as specified and as directed.
S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
S&F anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605mm complete all as specified and as directed.
M&L for 4mm thick non-asbestos fiber cement building boards fixed or laid/ inserted to timber, GI/aluminium framework with screws complete all as specified and as directed.
M&L for two coats of oil emulsion distemper on ceiling including preperation of new plastered surfaces and priming with alkali resistant primer on plastered surfaces, preparatory to distempering complete all as specified and as directed.
M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.
M&L for 100 mm thick cement concrete 1:2:4 type B-1, (using 20mm graded granite stone aggregate) as in hard standing make impressions while concrete is green complete all as specified and as directed.
M&L for forming contraction (dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and as directed.
M&L for 50 mm thick sand filling for cushion bed below interlocking paver blocks complete all as specified and as directed.
M&L for machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed.
M&L for chequered cement concrete tiles 250x250x25mm / 300x300x25mm thick in floors, with mixture of grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.
S&F PVC SWR rain water gutter 150 mm dia fixed to wall with stainless steel screws including clamps and necessary fittings complete all as specified and as directed.
S&F stainless steel sheet gutter of 1 mm thick fixed to wall with stainless steel screws including clamps and necessary fittings complete all as specified and as directed.
S&F solar control film 50 micron thick reflective type sticked to glass panes/sheet as per instructions of manufacturers complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing using Fe-410- W (Gde-E-250) quality-B complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
Complete removal of existing paint treatment by scrubbing using nylon /jute/wire brushes, scrapper blades or by using sanding machine complete all as specified and as directed.
M&L for preparation of old painted wall surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L in repairs for veneered decorative plywood 4 mm thick , grade 1 (with BWR resin) with decorative face veneers on one face, fixed with screws/adhesive to timber frame work of flush door complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring (light, fan and power socket etc) complete (except concealed conduit) including fittings such as switches ceiling roses, pendent, regulators, sockets, earth plug and socket etc and making good matching to the existing colour to the disturbed surface complete all as specified and as directed.
M&L for colour code point wiring FRLS PVC insulated and unsheathed cable with 1.5 sqmm copper conductor single core multistandred 1100 volt grade conforming to IS 694 drawn through concealed PVC conduit medium grade not less than 20mm dia including PVC/GI flush box fitted with modular cover plate with frame (inner/ outer plate) for mounting 6 Amps switch and socket etc on independent board including FRLS 1.5 sqmm earth wire copper insulated wire connected to common earth dolly including making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engr in charge all as directed at the site. Notes:- i. Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engineer in charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. ii. Same size wire shall be used for phase, neutral and earth conductor. iii. The wiring shall be done strictly by following proper colour coding using red , blue, yellow for phase, black for neutral and green for earth leads. iv. Size of copper earth wire must be equal to size of current carrying conductor upto size 16 sqmm.
(a) One Light/ fan point controlled by one switch.
(b) One 3 pin socket outlet 5 Amps on the same board with other switches.
(c) 5 Amps socket point on independent board.
All as per item no.68 here in above but 2.5 sqmm for 15 Amps socket on independent board complete all as specified and as directed.
M&L for sub main wiring color coded using 2 runs of 2.5sq mm FRLS PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through concealed PVC conduit along with 1 run of 2.5 sqmm PVC insulated copper conductor FRLS Cable as earth lead connected to common earth dolly including taking down the unserviceable wiring complete all as specified and as directed. Notes:- (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) 3 runs of 2.5 sqmm PVC insulated copper conductor and 1 run of PVC conduit not less than 20mm dia, medium grade will be measured as one unit. (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.
M&L for sub main wiring using 4 runs of 6 sq mm FRLS PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including concealed PVC conduit along with 2 runs of 6 sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly including taking down the unserviceable wiring complete all as specified and as directed. Notes:- (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) 6 runs of 6 sqmm PVC insulated copper conductor and 1 run of PVC conduit not less than 20mm dia medium grade will be measured as one unit. (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.
S&F ceiling rose 3 terminal 240V PVC/Poly carbonate insulated body complete all as specified and as directed.
S&F modular switch one way 6 Amps 1 module complete all as specified and as directed.
S&F modular socket 6 Amps 2/3 pin 2 module complete all as specified and as directed.
S&F modular switch one way 16 Amps 1 module complete all as specified and as directed.
S&F modular socket 16 Amps 2/3 pin 2 module complete all as specified and as directed.
S&F MCB single pole AC 240 Volts, 6 to32 Amps complete all as specified and as directed.
S&F MCB triple pole & neutral, 40 Amps, 415 Volts AC complete all as specified and as directed.
Supply and fix in repair MCB DB TPN 415V double door type, 6 way with bush bar of appropriate current carrying capacity, neutral link, earth bar and din rail complete all as specified and as directed.
Supply and fix in replacement surface and wall mounted 10 W 2 feet LED batten, out put lumen greater than 100 lumen/watts, extruded channel in thermally conductive material for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver making connection to ceiling rose to fitting with 3 core 1 sqmm copper conductor complete all as specified and directed by Engineer-in -charge. Make:- Crompton Model TRIMLINE-LDL-10W-CDL or equivalent in Philips/ Wipro /Havells.
Supply and fixing LED down lighter fitting 18W, output lumen greater than 100 lumen/watts with round shaped surface mounted, PDC aluminium housing and high translucent frosted plastic diffuser makes it a robust luminaire efficacy 100lm/w complete all as specified and as directed. Make:- Crompton Model PEARL NIOS-R-LCDSPLN-R-18-CDL or equivalent in Philips/Wipro/Havells.
Supply and fix recess mounted 36W luminaire 2x2 tile, output lumen greater than 100 lumen/watts glare free uniform illumination housing with opel diffuser with colour temp 600K s complete all as specified and as directed. Make:- Crompton Model Polaris NIO I LCTLRNE-36-FO-CDL or equivalent in Wipro/Philips/Havells.
Supply and fix in repair triple pole and enclosure with a three pin and earth plug with socket complete including with one TPN MCB 415 Volts 32 Amps complete all as specified and directed by Engr-in-charge.
M&L for cutting of holes in existing concrete block/stone wall including brick wok and plastering finishing for 250 mm sweep exhaust fan complete all as specified and directed by Engineer-in-charge.
Supply and fixing ISI marked exhaust fan plastic with fixing arrangements of size 250mm sweep, single phase 230 Voltage silent operation, rust proof body and blades inbuilt louvers shutters for protection when not in use for 250 mm sweep exhaust fan and connecting up including provision of three core flexible PVC cable with stranded copper conductor of size 1.5 sqmm from ceiling rose to connector of exhaust fan complete all as specified and as directed.
Supply and fix in replacement of copper cable flexible 2.5 Sqmm 3 core 230 Volts complete all as specified and as directed by Engr-in-charge.
Supply and fix in replacement of old unserviceable street light fitting with LED street light fittings luminaire 60 watts, 240V 50Hz pressure die cast aluminium coating, heat resistant glass, IP 66 rating complete all as specified and as directed. Make:- Crompton Cat part no CRP-409-60-57 SL-GL-NSG or equivalent make in Philips/Wipro/Havells.
Supply and fix in replacement of weather proof street light junction boxes made out of thermo plastic consisting of 4 nos of connectors of capacity 40 amp 415v and 1no of SP MCB rating 6 AMP 240 V with proper closing arrangement, elmax connector for neutral link including pole mounting clamp with nut bolts. The box should be able to accomodate two 25 Sqmm 3.5core cables.The box should have two cable entry complete all as specifed and directed by Engineer-in-Charge.
Supply, installation, testing and commissioning of water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity of 150 Ltrs respectively including necessary platform and inlet pipe connection complete all as specified and directed by Engr-in-Charge. Make:- Bluestar SDLX15150A/SDLX150150B or equivalent in Usha/Voltas.
Supply and fix water purifier electric driven (single phase), having approx 20 LPH capacity and wall mounted complete all as specified and directed by Engr-in-Charge. Make:- Kent Model No Supreme Plus or equivalent in Aquaguard/Eureka Forbes.
Palace constructions
SANDR
KDR CONSTRUCTION
SCION ENTERPRISES
GMS Builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .